| Params | Cylinder Structure: Welded-body or application-specific long-stroke construction
Acting Type: Single Acting or Double Acting
Bore Diameter: Engineered according to required output force, operating pressure and installation envelope
Piston Rod Diameter: Determined through load, unsupported length, buckling and deflection calculations
Stroke Length: Customized according to the required equipment movement
Retracted Length: Minimized within the limits of the selected structure and mounting configuration
Extended Length: Determined by the retracted length and effective stroke
Pin-to-Pin Dimensions: Manufactured according to the approved installation drawing
Working Pressure: Customized according to the equipment hydraulic system
Maximum System Pressure: Must be confirmed before final engineering approval
Proof-Test Pressure: Defined in the approved inspection and testing plan
Rated Push Force: Calculated from effective piston area and specified working pressure
Rated Pull Force: Calculated from annular piston area and specified working pressure
Operating Direction: Horizontal, vertical, inclined or changing-angle installation
Load Direction: Compression, tension or alternating push-and-pull load
Rod Buckling Verification: Required for long-stroke compression applications
Rod Deflection Verification: Required for horizontal and inclined installations
Cylinder Alignment: Equipment mounting points must maintain acceptable coaxial alignment
Permissible Side Load: Defined according to the approved engineering calculation
Operating Speed: Selected according to bore size, hydraulic flow and stroke length
Flow Requirement: Calculated according to displacement volume and target cycle time
Duty Cycle: Intermittent, repeated-duty or application-specific operation
Hydraulic Medium: Mineral-based hydraulic oil or approved compatible fluid
Operating Temperature: Determined by the selected sealing system and hydraulic fluid
Hydraulic Ports: SAE ORB, NPT, BSPP, BSPT, metric thread, SAE flange or customer-specified connection
Port Size: Selected according to required flow and acceptable pressure loss
Port Position: Customized according to hose routing throughout the full movement
Mounting Style: Clevis, pin-eye, cross-tube, trunnion, flange, spherical bearing or custom mounting
Mounting Bearings: Replaceable bushings or spherical plain bearings available
End-of-Stroke Cushioning: Optional head-end, cap-end or dual-end hydraulic cushioning
Stroke Limitation: Optional internal stop, external stop or mechanical travel-control provision
Load-Holding Protection: Optional counterbalance valve, pilot-operated check valve or hose-burst valve
Position Monitoring: Optional linear position transducer, magnetostrictive sensor, proximity sensor or limit switch
Surface Protection: Industrial paint or application-specific corrosion-resistant coating
Identification: Customer part number, serial number, logo and traceability code available
Testing: Dimensional inspection, pressure testing, leakage testing and complete full-stroke cycling
Straightness Inspection: Barrel and piston-rod straightness inspected according to the approved drawing
Documentation: Approved drawing, dimensional report, pressure-test report and inspection records available | Material | Cylinder Barrel: Precision-honed seamless steel tube selected for straightness, wall thickness and pressure requirements
Piston Rod: High-strength steel or alloy steel with hard-chrome-plated or application-specific treated surface
Piston: High-strength carbon steel, alloy steel or ductile iron according to design requirements
Cylinder Head / Gland: High-strength machined steel or ductile iron
Cylinder Base: High-strength machined or forged steel
Mounting Components: High-strength carbon steel or alloy steel
Mounting Pins: Hardened alloy steel
Bushings: Bronze, steel-backed composite or hardened steel bushing
Spherical Bearings: Heavy-duty spherical plain bearings where angular movement is required
Wear Rings: Reinforced polymer or composite bearing material designed for extended guiding length
Primary Seals: Polyurethane, PTFE composite or application-specific sealing system
Static Seals: NBR, FKM or temperature-specific elastomer
Rod Wiper: Polyurethane, metal-cased scrap |
| Applicable Industry | Construction Equipment
Agricultural Machinery
Waste and Recycling Equipment
Refuse Collection Vehicles
Material Handling Equipment
Industrial Automation
Lifting and Access Equipment
Forestry Equipment
Mining Equipment
Marine and Port Equipment
Special-Purpose Vehicles
Trailer and Truck Equipment
Water-Control and Infrastructure Equipment | 定制所需资料 | Equipment Type
Cylinder Function
Required Stroke Length
Retracted Pin-to-Pin Length
Extended Pin-to-Pin Length
Available Installation Envelope
Required Push Force
Required Pull Force
Normal Working Load
Maximum Peak Load
Working Pressure
Maximum System Pressure
Installation Direction
Load Direction
Unsupported Rod Length
Side-Load Conditions
Required Operating Speed
Required Cycle Time
Hydraulic Flow Rate
Operating Frequency
Duty Cycle
Mounting Style
Mounting-Pin Diameter
Mounting Width
Permitted Angular Movement
Hydraulic-Port Type
Hydraulic-Port Position
Hose-Routing Restrictions
Cushioning Requirement
Position-Sensing Requirement
Load-Holding Requirement
Operating Temperature
Hydraulic Fluid Type
Environmental Conditions
Corrosion-Protection Requirement
Existing Drawing, Sample or Part Number
Annual Demand |
✓ Verified Elite Supplier
