{{ variable.name }}
The 103-series flexible conveyor chain carries products that are too wide for a narrow chain and too light for a heavy-duty line: one-litre bottles, cans, jars, small tubs and mid-size cartons. The 103 mm moulded link, in POM, PP or POK, is pinned with SS304 stainless steel and side-flexes through horizontal, inclined, vertical, U-turn and S-curve sections. Ten model codes sit in this width, covering plain, gripper, anti-static and rubber-strip surfaces, so the same chain path can be tuned to glass, PET, metal or plastic containers without changing the conveyor frame.
| Chain type | Flexible (side-flexing) conveyor chain, 103 series |
|---|---|
| Chain width | 103 mm |
| Model codes | 103A, 103P, 103T, 103M, 103FL, 103R, 103B, 103H, 103D, 103Y |
| Pitch | 25.4 mm / 33.5 mm |
| Link material | POM / PP / POK |
| Pin material | SS304 stainless steel |
| Tensile strength | 3000–6000 N (family range, confirmed per width) |
| Max speed | 75 m/min |
| Min bending radius | 150 mm – 500 mm (by width and configuration) |
| Working temperature | -20 °C to 80 °C |
| Surface options | Plain / gripper / anti-static / rubber strip |
| Conveyor layouts | Horizontal, inclined, vertical, U-turn, S-curve |
The 103 mm width is the widest group in the mid-range and the most frequently specified for beverage, dairy and household chemical lines. The ten codes share the same 103 mm footprint, so a change from a plain top to a gripper or rubber-strip surface can be handled at link level. Narrower lanes are served by the 44, 63 and 83 mm widths, and wider product by 140, 175 and 295 mm, all from the same flexible chain family with matching sprockets and UHMW wear strips.
Links are injection moulded in POM, PP or POK and assembled with SS304 pins. The link face is smooth and non-porous, which keeps residue from settling into the chain on food and cosmetic lines. Because we hold our own moulds and run 15 injection moulding machines in-house, a replacement link for a chain installed years ago is still produced on the original tooling, and component geometry is checked by optical measurement.
Beverage and dairy filling, food packing, pharmaceutical secondary packaging, cosmetics, daily chemical and logistics. Typical duty is a single lane of one-litre bottles, cans or jars that must turn, incline or accumulate between filling and case packing.
Anti-static, food grade and GMP cleanroom versions, colour and width customization are available. Ask for the matching split or one-piece sprockets and UHMW wear strips when specifying a replacement chain for an existing conveyor.
What is the difference between the ten 103-series codes?
They differ in link geometry and top surface. Send the container type, weight and layout and we will narrow the list to the codes that fit your guide rails.
Will a 103 mm chain fit my existing 103 mm conveyor?
That depends on the sprocket and guide rail dimensions already installed. Share the sprocket drawing or a photo of the drive end and we will check the match.
Can the chain handle glass bottles?
The family supports plain, gripper and rubber-strip surfaces, and the chain runs quietly with gentle product contact. Confirm the exact surface for your container at inquiry.
What speed and temperature can it run at?
Up to 75 m/min within -20 °C to 80 °C across the series.
Is a food grade version available?
Yes, food grade and GMP cleanroom versions are listed as customization options.
Can I buy spare links only?
Yes. Single links are supplied from our own tooling so an installed chain can be repaired section by section.
Tell us the container and the route — product type, weight, chain path drawing, existing model code and quantity. We will reply with the matching 103-series code, sprockets and wear strips.
Contact: Fanni — cs-conveyor@wxcsjm.com — WhatsApp +86 189 2113 7719
Changshuo Conveyor Equipment (Wuxi) Co., Ltd., No.129 Xinhua Road, Meicun Town, Xinwu District, Wuxi, Jiangsu, China
www.csbelts.com

