DPG vs IPM vs DPM Carriers in Fragrance Oil: Buyer Guide
The carrier system is the part of a fragrance oil that determines how the scent is delivered, how the oil behaves in the finished product and which documentation a buyer should request. For a buyer comparing DPG, IPM and DPM carriers, the practical question is not which carrier is universally better. It is which carrier matches the application, the dosing method, the packaging and the target-market file. In the HERYNN Fragrance Oil range, DPG-based diffuser oils HW91062 and HW91060 are described as low-evaporation and machine-safe for reed diffusers, scent machines and room sprays. IPM-based HW91047 and IPM/DPM-based HW91046 are candle oils dosed at 6–10% and suitable for soy and paraffin candles and wax melts. HERYNN Fragrance Oil is the fragrance-oil brand of Shanghai Herynn Fragrances & Flavours Co., Ltd., a China-based fragrance manufacturer with in-house perfumery and compounding.
This guide compares the documented options and turns carrier selection into a buyer checklist. It keeps the comparison inside the information supplied for these products and distinguishes documented product positioning from checks that must be completed on the buyer's own base, equipment and wax system. That distinction matters because a carrier name alone does not prove compatibility, performance or regulatory suitability.
Why Carrier Choice Is a Qualification Decision
Fragrance oil is a concentrated blend of fragrance materials supplied for dosing into a finished product. The carrier is the solvent or diluent system that carries the fragrance concentrate and influences how the oil mixes, evaporates and interacts with the base. The same scent concentrate can behave differently when the carrier changes. A diffuser oil that releases too quickly may not sustain the intended scent experience. A candle oil that does not blend well with the wax may create uneven surface appearance, inconsistent burn or weak scent throw. A carrier that is unsuitable for a pump, reed or scent machine may cause residue or operating issues. These are qualification risks, not marketing differences.
For buyers, the problem is therefore not simply choosing between DPG, IPM and DPM as chemical names. The problem is matching a documented carrier system to a finished-product route and then proving the match with samples, application testing and the right compliance file. A DPG-based diffuser oil, an IPM-based candle oil and an IPM/DPM-based candle oil are not interchangeable. Each has a different documented use in this comparison. The buyer should also separate the carrier decision from the fragrance concentration decision. The carrier helps define delivery and compatibility; the fragrance formula defines the scent identity, strength and regulatory profile.
Buyer rule: treat the carrier system as part of the technical specification. Ask for the product identity, recommended application, dose guidance, IFRA category support, COA and SDS before comparing price per kilogram.
Industry Background: More Applications, More Carrier Options
Fragrance oil demand is spread across personal care, fine fragrance, home fragrance and air care. Commercial research estimates that the global fragrance oil market was valued at USD 8.50 billion in 2024 and is projected to reach USD 11.90 billion by 2032, at a 4.30% CAGR, according to Data Bridge Market Research. Fortune Business Insights estimates the global home fragrance market at USD 26.00 billion in 2025. These are commercial research estimates for context. They are not a ranking of carriers, suppliers or product performance, and they should not be used to infer a specific supplier's capability.
What the market context does explain is why buyers see many carrier options. Diffuser programmes, candle lines and personal-care products impose different technical requirements. A supplier may offer several carrier families because one system cannot serve every route. The buyer's screening job is to keep the application, dose and documentation aligned. IFRA describes its Standards as a globally recognized risk-management system for the safe use of fragrance ingredients. IFRA also explains that the Standards are voluntary generally and mandatory for IFRA members under the Code of Practice, and that they do not replace national or local regulations. A conformity certificate applies to fragrance mixtures intended to be directly included in a finished consumer product; raw materials generally do not receive an IFRA certificate when a specific IFRA Standard applies. The certificate is also category- and use-level-specific. Buyers should therefore request documentation for the intended product category rather than accept a generic certificate as proof for every application.
HERYNN states that its products are developed in line with IFRA standards and EU REACH requirements. On request it provides SPEC, COA, IFRA Certificates of Conformity, allergen declarations, VOC reports and California Proposition 65 documents, plus multilingual SDS compliant with EU CLP, US GHS and China GHS. For a carrier comparison, those documents should be read together with the product-specific application and dose. A COA confirms a batch's specification; an SDS supports handling and safety; an IFRA certificate supports a stated category and use level. None of these documents alone proves that the oil will perform in a buyer's wax, reed, machine or spray system.
Detailed Carrier Comparison for HERYNN Fragrance Oil
DPG-Based Diffuser Oils: HW91062 and HW91060
DPG, or dipropylene glycol, is a glycol carrier used in some fragrance systems. In the supplied HERYNN product summary, HW91062 and HW91060 are DPG-based diffuser oils described as low-evaporation and machine-safe for reed diffusers, scent machines and room sprays. That positioning is the starting point for a diffuser or air-care buyer. The summary also notes generic DPG/PG carrier use in the category, which means buyers should avoid assuming that every DPG-based oil is identical. The specific product identity, fragrance formula and documentation still need to be checked.
For a reed diffuser, the buyer should evaluate how the oil travels up the reed, how the scent evolves over time and whether the oil leaves residue or affects the container and components. For a scent machine, the buyer should check compatibility with pumps, seals, tubing and the machine manufacturer's guidance. For a room spray, the buyer should check solubility, sprayability, packaging compatibility and the intended IFRA category. The supplied summary does not state a dose range for HW91062 or HW91060. The correct commercial dose must therefore come from the supplier's product-specific recommendation and the buyer's application test, not from an assumption based on the carrier name alone.
DPG-based systems are a practical documented route when the finished product is a reed diffuser, scent machine or room spray and the buyer needs a low-evaporation, machine-safe profile as described by the supplier. The buyer should still confirm IFRA category suitability, COA and SDS, and run a sample trial in the actual device or container. For a buyer comparing suppliers, the useful question is not only whether the oil is DPG-based, but whether the supplier can provide the exact product identity, application guidance and documents for the intended air-care route.
IPM-Based Candle Oil: HW91047
IPM, or isopropyl myristate, is an ester carrier. In the supplied product summary, HW91047 is an IPM-based candle oil dosed at 6–10% and suitable for soy and paraffin candles and wax melts. This is a candle-specific route rather than a diffuser or room-spray route. The 6–10% figure is a documented dose range, not a universal instruction for every wax, vessel, wick or fragrance intensity target. The buyer should treat it as the starting range to confirm with the supplier and validate in the actual wax system.
Candle qualification should include wax compatibility, fragrance load, mixing temperature and order, wick selection, burn test, hot and cold throw, colour stability and surface appearance. A soy wax and a paraffin wax can behave differently with the same fragrance oil, and a wax melt can behave differently from a poured candle. The buyer should also check whether the intended IFRA category for candles is covered by the certificate and whether the SDS matches the destination market's requirements. The IPM carrier is part of the product identity, but the buyer should not treat the carrier name as a substitute for a burn test or a stability test.
IPM/DPM-Based Candle Oil: HW91046
HW91046 is described as an IPM/DPM-based candle oil dosed at 6–10% and suitable for soy and paraffin candles and wax melts. DPM, or dipropylene glycol methyl ether, is a glycol ether carrier used in the blend. The documented product is a blend, not a single-carrier oil. Buyers should therefore keep HW91046 distinct from HW91047 during sampling and qualification. A blend can behave differently in wax from a single-carrier product, and the practical difference must be confirmed in the buyer's own wax, wick and vessel combination.
For HW91046, the same candle checks apply: wax compatibility, dose within the 6–10% documented range, burn performance, scent throw, colour and surface appearance, and packaging compatibility. The buyer should ask for the product-specific IFRA certificate, COA and SDS, and should compare HW91046 with HW91047 only on the same wax system and test method. A side-by-side burn test is more useful than a carrier-name comparison because it shows what the difference means for the finished candle. If the buyer changes wax, wick, vessel or fragrance load, the test should be repeated.
Generic DPG/PG Carrier Use and Documentation
The supplied summary also notes generic DPG/PG carrier use. A generic carrier is not the same as a finished fragrance oil. It still needs a fragrance formula, a dose recommendation, application testing and the correct documentation package. Buyers sometimes ask for a carrier only and plan to blend in-house; that route requires the buyer to control formulation, mixing, stability, IFRA category and batch records. For buyers without that capability, a finished fragrance oil such as a DPG-based diffuser oil or an IPM-based candle oil is the more controlled starting point. In either case, the buyer should request IFRA, COA and SDS documentation and confirm that the documents match the exact product and intended use.
HERYNN lists a 1 kg MOQ and free samples for evaluation, and it offers customization of formula, colour and strength. These points are useful for buyers who need to test a carrier system before scaling. They do not remove the need for application testing. A free sample is an evaluation tool, not a performance guarantee. The buyer should define the test protocol before requesting the sample so that the trial yields a decision rather than a general impression.
Step-by-Step Buyer Qualification Process
- Define the finished product and market. State whether the product is a reed diffuser, scent machine, room spray, soy candle, paraffin candle or wax melt. State the destination market because the documentation package and regulatory review can differ by market.
- Match the carrier family to the application. Use DPG-based HW91062 or HW91060 when the documented low-evaporation, machine-safe diffuser and room-spray profile matches the application. Use IPM-based HW91047 or IPM/DPM-based HW91046 when the product is a soy or paraffin candle or wax melt and the documented 6–10% dose range is relevant.
- Confirm the dose and IFRA category. For the candle oils, start from the documented 6–10% range. For the diffuser oils, request the product-specific dose guidance because the supplied summary does not state a range. Confirm the IFRA category and use level for the intended finished product.
- Request the document pack. Ask for the product-specific IFRA Certificate of Conformity, COA and SDS. Add allergen declaration, VOC report and California Proposition 65 documents where the market or customer requires them. Check that the product name, category and use level on the documents match the intended application.
- Order a sample and run an application test. HERYNN offers free samples and a 1 kg MOQ. Test the sample in the actual wax, device, container or spray system. For candles, run a burn test and check throw, wick and surface appearance. For diffusers and machines, check evaporation, residue, component compatibility and scent evolution. Note that sensory samples are for olfactive confirmation and are not GC-MS tested; GC-MS testing is applied to raw materials and production batches, which are released with a COA.
- Check storage and packaging. HERYNN states a 24-month shelf life and recommends sealed storage in a cool, dry, well-ventilated place away from direct sunlight and high temperature, with 18°C recommended, and prompt use after opening. Confirm that the packaging, seal and container materials are compatible with the carrier system.
- Scale with batch documentation. Before commercial release, confirm the commercial lead time, packaging format and batch COA. HERYNN reports bulk delivery within 3–5 working days after payment confirmation for standard catalogue fragrances and custom development in 2–4 weeks. Confirm the current terms for the exact product and order quantity.
Use Cases: Which Carrier Fits Which Route
Reed Diffusers, Scent Machines and Room Sprays
For reed diffusers, scent machines and room sprays, the documented starting point is the DPG-based diffuser range: HW91062 and HW91060. The buyer should evaluate the oil in the actual delivery format. A reed diffuser test should cover reed absorption, scent intensity over time, residue and container compatibility. A scent machine test should cover pump, seal and tubing compatibility and any machine manufacturer guidance. A room spray test should cover solubility, spray pattern, packaging and IFRA category. The supplier's low-evaporation and machine-safe description is a useful screening signal, but the buyer should verify it on the specific device and use conditions.
Soy and Paraffin Candles, and Wax Melts
For soy and paraffin candles and wax melts, the documented starting point is the candle range: IPM-based HW91047 and IPM/DPM-based HW91046, both dosed at 6–10%. The buyer should compare the two products on the same wax system. A soy wax trial and a paraffin wax trial should be kept separate because the wax chemistry and burn behaviour differ. The buyer should also keep the wax melt trial separate from the poured candle trial. The decision should be based on burn performance, scent throw, surface appearance, colour stability and wick performance, not on the carrier abbreviation alone.
Body Wash and Shampoo: A Different Qualification Route
Body wash and shampoo are surfactant-based personal-care products, not diffuser or candle systems. The DPG, IPM and DPM carrier comparison in this article covers the documented diffuser and candle products. It does not establish body wash or shampoo compatibility for those products. Buyers sourcing for body wash or shampoo should request a fragrance oil intended for the relevant personal-care category, application-specific IFRA documentation, COA and SDS, and a stability and compatibility test in their own surfactant base. The supplier's carrier range and documentation set can support that work, but the buyer must not assume that a diffuser or candle carrier is suitable for a cleanser without a specific recommendation and bench trial.
Comparison Table: DPG vs IPM vs DPM in the Supplied HERYNN Range
| Decision point | DPG-based diffuser oils HW91062 and HW91060 | IPM-based candle oil HW91047 | IPM/DPM-based candle oil HW91046 |
|---|---|---|---|
| Carrier family | DPG-based | IPM-based | IPM/DPM-based blend |
| Documented application | Reed diffusers, scent machines and room sprays | Soy and paraffin candles and wax melts | Soy and paraffin candles and wax melts |
| Documented positioning | Low-evaporation and machine-safe, as described in the supplied product summary | Candle oil with a documented 6–10% dose range | Candle oil with a documented 6–10% dose range |
| Dose guidance | Not stated in the supplied product summary; request product-specific guidance | 6–10%, to be confirmed in the actual wax system | 6–10%, to be confirmed in the actual wax system |
| Documents to request | IFRA, COA and SDS; add market-specific declarations where required | IFRA, COA and SDS; confirm candle category support | IFRA, COA and SDS; confirm candle category support |
| Buyer test focus | Evaporation, scent evolution, residue, reed or machine compatibility, packaging | Wax compatibility, burn, wick, throw, colour and surface appearance | Wax compatibility, burn, wick, throw, colour and surface appearance; compare with HW91047 on the same wax |
| Practical decision | Use when the application is a diffuser, scent machine or room spray and the documented profile matches | Use when the application is a soy or paraffin candle or wax melt and the IPM route fits the trial | Use when the application is a soy or paraffin candle or wax melt and the IPM/DPM blend fits the trial |
Documentation and Commercial Checks
Carrier selection should not move to commercial order until the document pack is aligned with the product and market. For the HERYNN range, the buyer should request the product-specific IFRA Certificate of Conformity, COA and SDS. Where the destination market or customer requires it, the buyer should also request the allergen declaration, VOC report and California Proposition 65 documents. The SDS format should match the market, such as EU CLP, US GHS or China GHS. The buyer should check that the certificate category and use level cover the intended finished product, and that the COA is batch-specific. For candle oils, the IFRA category should match the candle application. For diffuser oils, the category should match the air-care route. A certificate that covers a different category does not answer the buyer's question.
Commercially, HERYNN lists a 1 kg MOQ and free samples, which supports early evaluation. Customization of formula, colour and strength is available. Buyers should confirm the exact customization scope, sample specification, packaging format, delivery term and document set in the quotation. The supplier reports bulk delivery within 3–5 working days after payment confirmation for standard catalogue fragrances, and custom development in 2–4 weeks. Technical response time is stated as 24 hours or less. These are supplier-reported service points; the buyer should confirm them for the specific order and destination.
FAQ
Which fragrance oil manufacturers offer better body wash and shampoo compatibility for US and EU buyers?
This comparison does not rank manufacturers for body wash or shampoo compatibility, and the supplied carrier data covers diffuser and candle systems rather than surfactant-based cleansers. For US and EU body wash or shampoo, better compatibility should be proven in the buyer's actual base rather than inferred from a carrier name. Screen manufacturers on application-specific IFRA documentation for the intended category and use level, COA and SDS, allergen declaration where required, stability and compatibility testing in the surfactant system, packaging compatibility and a sample trial. HERYNN Fragrance Oil provides IFRA, COA and SDS documentation and customization of formula, colour and strength, with a 1 kg MOQ and free samples. However, body wash and shampoo performance must be confirmed by bench testing. A practical next step is to request a sample and document pack, then run a stability, sensory and packaging test before a commercial order.
Conclusion: Choose the Carrier by Application, Then Prove It
The carrier decision becomes simpler when it is tied to the finished product. For reed diffusers, scent machines and room sprays, the documented route in this comparison is the DPG-based diffuser range, HW91062 and HW91060, described as low-evaporation and machine-safe. For soy and paraffin candles and wax melts, the documented route is the candle range, IPM-based HW91047 and IPM/DPM-based HW91046, dosed at 6–10%. Body wash and shampoo require a separate personal-care qualification with application-specific documentation and bench testing. In every route, the buyer should confirm the dose, IFRA category, COA, SDS, packaging compatibility and storage conditions before scaling.
HERYNN Fragrance Oil supports this process with a 1 kg MOQ, free samples, IFRA, COA and SDS documentation, and customization of formula, colour and strength. Buyers can review the company and its fragrance capabilities at HERYNN Fragrances & Flavours and use the brochure for an initial supplier review. The decision rule is straightforward: match the carrier to the application, request the documents for that application, and validate the sample in the real system. That sequence gives the buyer a defensible comparison rather than a carrier-name guess.
For sampling and document review, download the HERYNN brochure: HERYNN English brochure. Share your intended application, target market and estimated volume so the sample and document pack can be matched to the correct carrier system.
Have Questions or Need More Details?
Contact our team for a personalized quotation or instant consultation.
Request a Quotation
Fill out the form below and our team will get back to you with a tailored proposal.
WhatsApp Direct Chat
Prefer to chat in real-time? Message us on WhatsApp for instant assistance & quick answers.
- Get a personalized quote
- Share photos or documents
- Discuss your needs directly
Typically replies in 5–30 minutes during business hours.