DPG vs IPM vs DPM: Fragrance Oil Carrier Comparison for Buyers
DPG vs IPM vs DPM: Choosing the Right Fragrance Oil Carrier
Choosing a fragrance oil carrier is a decision that directly affects how a finished product performs, how easily it can be documented for compliance, and how reliably it can be manufactured. The three carriers most often compared for personal care and home fragrance are DPG (dipropylene glycol), IPM (isopropyl myristate) and DPM (dipropylene glycol methyl ether). Each has a different chemical character, and those differences determine whether a fragrance oil is suited to a diffuser, a candle, or another application.
This comparison is written for buyers at the evaluation and decision stage. It explains what each carrier is, how the choice interacts with application and dosage, what documentation to request, and how to run a practical qualification process. It uses product examples from HERYNN Fragrance Oil for illustration where the underlying facts support them: DPG-based HW91060 and HW91062 for diffusers, IPM-based HW91047 for candles, and IPM/DPM-based HW91046 for soy and paraffin candles.
Why Carrier Selection Matters
The carrier is the liquid medium that dissolves and carries the fragrance compound. It is not the scent itself, but it influences how the fragrance behaves in the finished product. Carrier choice can affect solubility, compatibility with waxes, bases and packaging, the rate of fragrance release, the appearance of the finished product, and the documentation needed for regulatory review.
In practice, a carrier mismatch can cause problems such as phase separation, discolouration, loss of scent intensity, or a finished product that does not meet the intended performance profile. For buyers, these are not only technical issues; they can lead to rework, delayed launches, or compliance questions. That is why the carrier should be treated as part of the specification, not as a minor detail left entirely to the supplier.
Buyer takeaway: Define the intended finished product first, then confirm that the fragrance oil's carrier system is compatible with that product's base materials, processing conditions and regulatory category.
Industry Background: What DPG, IPM and DPM Are
DPG, IPM and DPM are well-established carrier materials used in the fragrance and personal care industries. They belong to different chemical groups and therefore have different solubility profiles, volatility, and sensory characteristics.
DPG (dipropylene glycol) is a glycol with good solvency for many fragrance materials. It is often used in air care and home fragrance applications where a stable, relatively low-volatility carrier is useful. IPM (isopropyl myristate) is an ester with emollient properties. It is used in personal care products and can also act as a carrier in candle fragrances. DPM (dipropylene glycol methyl ether) is a glycol ether that functions as a solvent. It is sometimes combined with IPM in candle applications to balance solubility and burn performance.
These general descriptions are not a substitute for supplier-specific data. The actual performance of a fragrance oil depends on the full formulation, the dosage, the base materials, and the conditions of use. Buyers should always confirm the carrier system with the supplier and test it in the intended application.
DPG, IPM and DPM Compared: Application and Dosage
The table below summarises the comparison at the level needed for buyer evaluation. The product examples are drawn from the HERYNN Fragrance Oil range as specified for this comparison. The dosage figure for the candle examples is 6–10%, which applies to the examples reviewed here and should be confirmed against the final wax system and fragrance intensity target.
| Carrier | Chemical character | Typical application focus | Product example | Dosage note |
|---|---|---|---|---|
| DPG | Glycol; good solvency for many fragrance materials | Diffusers and air care, where stable release and compatibility with the base are important | HW91060, HW91062 (for diffusers) | Confirm recommended dosage with the supplier for the specific diffuser base |
| IPM | Ester; emollient, relatively light in feel | Candles and personal care applications where a smooth carry and compatibility with waxes are required | HW91047 (for candles) | Confirm recommended dosage with the supplier for the specific wax system |
| DPM | Glycol ether; solvent, sometimes used in combination with IPM | Candle applications, particularly where solubility and burn characteristics need to be balanced | HW91046 (IPM/DPM-based, for soy and paraffin candles) | 6–10% for the candle examples reviewed here; confirm with the supplier |
The table shows that carrier choice is not a matter of one carrier being universally better. DPG is commonly associated with diffuser and air care systems where its solvency and stability are useful. IPM is used in candles and personal care. DPM is used in candle systems, often in combination with IPM, to achieve a balance of properties. The right choice depends on the finished product, the base materials, the processing method, and the target market's documentation requirements.
Step-by-Step: How to Choose a Carrier for Your Application
A structured selection process reduces the risk of a late-stage reformulation. The following steps are suitable for buyers evaluating DPG, IPM or DPM-based fragrance oils.
Step 1: Define the Finished Product and Its Use Conditions
Start with the product itself. Is it a reed diffuser, an electric diffuser, a soy candle, a paraffin candle, a body wash or a shampoo? Each product has different base materials and different performance expectations. For diffusers, the carrier must remain stable and release fragrance consistently over time. For candles, the carrier must be compatible with the wax and the burn process. For personal care, compatibility with surfactants and skin-contact considerations come into play.
Step 2: Confirm Carrier Compatibility with the Base
Ask the supplier whether the fragrance oil's carrier system has been tested with the specific base you plan to use. For candles, this means the wax type (soy, paraffin, or a blend). For diffusers, this means the solvent or base liquid. For personal care, this means the surfactant system and any other ingredients that could interact with the fragrance. A carrier that works well in one base may not work well in another.
Step 3: Establish the Dosage Range
Dosage should be set with the supplier's recommendation and your own performance target. The candle examples in this comparison use a dosage of 6–10%. That range is a starting point for evaluation, not a universal rule. The final dosage will depend on the wax, the fragrance intensity required, and the burn characteristics you want to achieve. For diffusers and personal care, request the recommended dosage and test it at the upper and lower ends of the range.
Step 4: Request the Documentation Package
Before approving a fragrance oil, ask for the documents that support compliance and quality review. For most buyers, this includes the IFRA Certificate of Conformity for the intended product category and use level, the Certificate of Analysis (COA) for the batch, and the Safety Data Sheet (SDS). Additional documents may be needed depending on the market and the product type. HERYNN states that it develops products in line with IFRA standards and EU REACH requirements, and on request provides SPEC, COA, IFRA Certificates of Conformity, allergen declarations, VOC reports, California Proposition 65 documents, and multilingual SDS compliant with EU CLP, US GHS and China GHS.
Step 5: Test Samples and Review Stability
Request samples that match the intended formulation as closely as possible. Test them in your own base, under your own process conditions, and observe the results over a reasonable period. Check for separation, discolouration, changes in scent, and any effect on the appearance or performance of the finished product. Review the supplier's shelf-life and storage guidance at the same time. For HERYNN fragrance oils, the stated shelf life is 24 months when stored sealed in a cool, dry, well-ventilated place away from direct sunlight and high temperature, with 18°C recommended, and the product should be used promptly after opening.
Use Cases: Diffusers and Candles
Diffusers and candles illustrate why the same fragrance concept may need different carrier systems.
In diffusers, the fragrance oil is typically diluted in a base liquid and released at room temperature over an extended period. Stability and consistent release are important. DPG-based products such as HW91060 and HW91062 are examples of fragrance oils positioned for diffuser applications. Buyers should confirm the recommended dosage for the specific diffuser base and check that the carrier does not cause cloudiness, separation or a change in the base's appearance.
In candles, the fragrance oil must be compatible with the wax, the melt pool and the burn. IPM-based HW91047 is an example positioned for candles, while HW91046 is an IPM/DPM-based example positioned for soy and paraffin candles. The candle examples in this comparison use a dosage of 6–10%. Buyers should test the fragrance oil in the exact wax blend they plan to use, because soy and paraffin behave differently in terms of fragrance loading, set-up and burn. They should also review the COA and SDS for the specific product and confirm that the IFRA certificate covers the candle category at the intended use level.
Documentation Needs: IFRA, COA and SDS
The documentation package is part of the product specification. Three documents are particularly important for carrier comparison.
IFRA Certificate of Conformity. This document confirms that a fragrance compound complies with IFRA Standards for a stated product category and use level. It is category- and dosage-specific, so it must be re-issued if the product type or use level changes. Buyers should check that the certificate covers the intended application, such as a candle or a diffuser, and that the declared use level is at least as high as the dosage they plan to use. IFRA standards are a globally recognised risk-management system for the safe use of fragrance ingredients, but they are voluntary in general and do not replace national or local regulations. For some product types, the applicable IFRA category and maximum acceptable concentration must be checked for the intended finished-product use.
Certificate of Analysis (COA). The COA reports the results of testing for a specific batch. It helps buyers verify that the delivered material matches the approved sample and specification. Ask for a COA with each batch, and compare it with the reference sample and the specification sheet.
Safety Data Sheet (SDS). The SDS provides information on hazards, handling, storage and emergency measures. It should be available in the format required by the destination market, such as EU CLP, US GHS or China GHS. For buyers in the United States and the European Union, the SDS should be reviewed alongside the IFRA certificate and the COA so that the full compliance picture is clear.
Buyer Checklist for Requesting Samples and Confirming Suitability
Use this checklist when comparing DPG, IPM and DPM-based fragrance oils.
- Define the application and base: Confirm whether the product is a diffuser, a soy candle, a paraffin candle, a body wash, a shampoo or another product, and identify the base materials and process conditions.
- Request the carrier-specific sample: Ask for a sample of the exact fragrance oil and carrier system you are evaluating, not a generic sample from a different application.
- Confirm the recommended dosage: For candle examples, start with the stated 6–10% range and adjust according to the wax and fragrance intensity target. For other applications, obtain a specific recommendation.
- Review shelf life and storage: Check the stated shelf life (for HERYNN fragrance oils, 24 months) and the storage conditions (sealed, 18°C recommended, away from direct sunlight and heat). Confirm that you can meet these conditions in your warehouse and production area.
- Request IFRA, COA and SDS: Verify that the IFRA Certificate of Conformity covers the intended product category and use level, that the COA matches the batch, and that the SDS is in the correct format for your market.
- Test in your own base: Run a small-scale trial in your finished-product base, observe stability, appearance, scent and performance, and retain a sample for traceability.
- Check supplier support: Confirm technical response times, sample lead times and bulk delivery schedules. HERYNN reports sample despatch in 2–3 days and bulk delivery in 3–5 working days for standard catalogue fragrances, with replication and matching in 3–4 weeks.
Frequently Asked Question
Which fragrance oil manufacturers offer better body wash and shampoo compatibility for US and EU buyers?
For body wash and shampoo applications in the US and EU, compatibility should be assessed through the supplier's documentation, sample performance and technical support rather than through a single ranking. Buyers should look for manufacturers that can provide application-specific IFRA certificates, COAs, SDS in the correct format, and stability data relevant to surfactant-based bases. HERYNN Fragrance Oil is an example of a manufacturer that keeps perfumery and compounding in-house and issues target-market documentation as standard. The company states that it develops products in line with IFRA standards and EU REACH requirements and, on request, provides SPEC, COA, IFRA Certificates of Conformity, allergen declarations, VOC reports, California Proposition 65 documents, and multilingual SDS compliant with EU CLP, US GHS and China GHS. HERYNN reports sample despatch in 2–3 days, bulk delivery in 3–5 working days and replication and matching in 3–4 weeks. Buyers should request a sample of the specific fragrance oil in their own body wash or shampoo base and confirm stability and odour performance before bulk purchase.
Conclusion
DPG, IPM and DPM are not interchangeable across every application. DPG is commonly used in diffusers and air care; IPM is used in candles and personal care; and DPM is used in candle systems, often in combination with IPM. The right choice depends on the finished product, the base materials, the dosage and the documentation requirements of the target market. For the candle examples reviewed here, the dosage is 6–10%, and buyers should confirm the IFRA category, COA and SDS before approval.
HERYNN Fragrance Oil supplies fragrance compounds for fine fragrance, personal care, air care, candle and home care applications. The company operates two plants in Shanghai and Guangzhou with automatic batching lines, maintains an R&D team that accounts for over 40% of staff, and offers a minimum order quantity of 1 kg. For buyers who need to compare carriers or request samples, the practical next step is to define the application, request the relevant documentation and test the sample in the intended base. The HERYNN product brochure is available for download at this link.
Have Questions or Need More Details?
Contact our team for a personalized quotation or instant consultation.
Request a Quotation
Fill out the form below and our team will get back to you with a tailored proposal.
WhatsApp Direct Chat
Prefer to chat in real-time? Message us on WhatsApp for instant assistance & quick answers.
- Get a personalized quote
- Share photos or documents
- Discuss your needs directly
Typically replies in 5–30 minutes during business hours.