
{{ variable.name }}
A balanced G37 warp and weft construction woven to 770 g/m² at 0.77 mm, for CCL and FR4 laminates, electrical insulation, FRP moulding and fire-barrier builds.

Model 7545GA is a woven fiberglass fabric built on a G37 1/2 warp yarn and a G37 1/3 weft yarn, woven to 770 g/m² at 0.77 mm thickness. Warp density is 11 fil./cm and weft density is 5.5 double fil./cm, so mechanical load is distributed across both directions instead of being concentrated in the warp. That balance is what makes the roll predictable to drill, punch and machine, and it is the reason the fabric is used as reinforcement in FR4 and CCL substrates, electrical insulation, FRP moulding, building fire barriers and anti-corrosion structures. Rolls are produced on sizing, warping and air-jet and rapier weaving equipment at Hongyan's 110,000 m² facility in Haining, Zhejiang.
Balanced warp and weft load
G37 1/2 warp paired with G37 1/3 weft at 11 fil./cm and 5.5 double fil./cm, giving stable mechanical strength in both directions for laminates and panels.
Stable 0.77 mm thickness
Consistent thickness tolerance supports repeatable press gaps and laminate build in FR4 and composite panel production.
Clean drilling and punching
The construction is specified for easy punching and machining, which limits fraying and tool wear during hole-making and trimming.
Resin compatibility
Good resin compatibility allows even wet-out and bonding in standard FR4 substrates, FRP moulding and composite panels.
Flame and corrosion resistance
Flame retardancy and corrosion resistance suit building fire barriers, fireproof covering and outdoor anti-corrosion FRP structures.
Managed production system
Produced under ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 management systems certified by Beijing NGV Certification Center.
| Model | 7545GA |
| Material | Fiberglass |
| Warp yarn | G37 1/2 |
| Weft yarn | G37 1/3 |
| Weight | 770 g/m² |
| Thickness | 0.77 mm |
| Warp density | 11 fil./cm |
| Weft density | 5.5 double fil./cm |
| Certification | ISO 9001:2015 · ISO 14001:2015 · ISO 45001:2018 (valid to 2028-04-29) |
7545GA is the construction defined in this listing: G37 1/2 warp, G37 1/3 weft, 770 g/m², 0.77 mm. Because Hongyan runs sizing and combining machines, parallel-beam warping machines, slitting warping machines, air-jet looms and rapier looms, other yarn, weight and density combinations can be developed on request for projects that sit outside this specification. Roll width and roll length are agreed at order confirmation.
The fabric is woven from continuous fiberglass yarns. The warp uses paired G37 yarns (1/2), while the weft is inserted as a three-ply G37 yarn (1/3), which is why weft density is expressed in double filaments per centimetre. The resulting interlacing holds the two yarn systems in a stable grid, keeping areal weight at 770 g/m² and thickness at 0.77 mm while leaving an open enough structure for resin to penetrate during impregnation. The woven form also keeps the roll handleable for cutting, lay-up and installation as a continuous layer.
Order quantities are customized per order. The company develops and manufactures high-performance woven fabrics tailored to specific customer requirements, so construction, yarn and weight can be discussed against your process. Certification documentation covering the ISO 9001, ISO 14001 and ISO 45001 management systems is available for supplier qualification.
A composite material manufacturer supplied from Korea, China, Japan, Turkey, Germany, the United States, Canada and India uses woven fiberglass fabric as a reinforcement and protection layer. The fabric is installed as a continuous layer under road base and around drainage, as a static reinforcement layer in plaster before finishing, on filter press plates under pressure filtration cycles, and as fireproof covering in welding and high-temperature work. Reported results include no cracking, enhanced strength, reduced maintenance, stable filtration, less downtime, lower replacement cost, zero fire incidents and an intact blanket after heat exposure, with the material still in operation. Quantities are customized per order.
What construction does model 7545GA use?
G37 1/2 warp yarn and G37 1/3 weft yarn, 770 g/m², 0.77 mm thick, warp density 11 fil./cm and weft density 5.5 double fil./cm.
Can the fabric be drilled, punched or machined?
Yes. The balanced warp and weft structure is specified for easy punching and machining as well as balanced mechanical strength and drillability.
Is it compatible with resin systems used in FR4 and CCL?
The fabric is specified with good resin compatibility and is used for standard FR4 substrates, CCL and composite panels.
How consistent is the thickness?
The construction is specified with stable thickness tolerance at a nominal 0.77 mm, produced under the ISO 9001:2015 quality management system. Order-specific tolerance requirements are confirmed with our sales team.
Which certifications support the product?
ISO 9001:2015 (05325Q30237R1M), ISO 14001:2015 (05325E30191R1M) and ISO 45001:2018 (05325S30180R1M), issued by Beijing NGV Certification Center Co., Ltd. and valid to 2028-04-29.
Which industries is the fabric used in?
Electronics, PCB, CCL, composite materials, construction, fire insulation, wind power, automotive, railway, marine, aerospace, anti-corrosion engineering, pipeline lining, outdoor equipment, FRP moulding and electrical insulation.
How are quantities and specifications agreed?
Quantities are customized per order, and roll width, roll length and construction details are agreed at order confirmation with our sales team.
Inquiry Information
Contact: Jonan
Email: jonan.xie@vip.163.com
Tel: +86 138-0672-5139 · WhatsApp: +86 182-6836-8006
Address: No. 18, Jingbian 8th Road, Warp Knitting Industrial Zone, Haining, Zhejiang, China
Zhejiang Hongyan New Material Co., Ltd. · www.hoyan.cc
The first entry corresponds to the supplied product photo; the other two are recommended future detail shots.