{{ variable.name }}
Higher-capacity 4x2 city rear loader at 12,490 kg GVW and 4,990 kg payload for denser routes.
This 10 m3 4x2 rear loader garbage truck is the larger of the two city models already quoted and shipped. It runs at 12,490 kg GVW with a 4,990 kg payload. The hydraulic packer plate, sealed body and 120-1,100 L bin lift support residential and commercial routes where a 5-8 m3 body fills too quickly. The 4x2 chassis keeps the truck suitable for city streets, with diesel engines from 90 to 300 hp and left-hand or right-hand drive.
The 4x2 unit runs at 12,490 kg GVW for routes with higher waste density.
A 2:1 to 3:1 ratio reduces trips to the landfill or transfer station.
A sealed sump and drain valve under the body help avoid liquid leakage.
The 6-15 s cycle can be matched to the local wheelie bin standard.
Gear pump, hard chrome rods and imported seals are specified for daily collection.
2,800-4,500 mm wheelbase, LHD or RHD, and 90-300 hp diesel engines.
| Parameter | Specification |
|---|---|
| Body type | Rear-loader compactor |
| Drive | 4x2 |
| GVW | 12,490 kg |
| Payload | 4,990 kg |
| Body capacity | 10 m3 |
| Compaction ratio | 2:1 to 3:1 |
| Compaction force | 12-18 t |
| Bin lift | 120-1,100 L, 6-15 s cycle |
| Discharge | About 40 s |
| Hydraulic pressure | 18-21 MPa |
| Engine | Diesel 90-300 hp, Euro II to Euro V |
| Cab | 2-3 persons, LHD or RHD |
This 10 m3 4x2 rear loader sits beside the 5-8 m3 4x2 city unit at 9,490 kg GVW and 3,200 kg payload. It can be re-quoted with a larger body or a second axle when route density increases.
The body shell is Q235/Q345 carbon steel with 4-6 mm side walls and 5-8 mm floor, welded and fully sealed. The rear door uses a steel frame with replaceable EPDM rubber seal. The packer plate is Q345 wear-resistant steel with replaceable wear strips. Hydraulic cylinders use 45# steel barrels, hard chrome-plated piston rods and imported seal kits, with a stainless steel 304 or epoxy-coated leachate tank.
City and district sanitation, residential and commercial refuse routes, market and restaurant waste, hotel and hospital non-hazardous waste, institutional campuses, tourism areas and public event cleaning. The 10 m3 body suits routes where the 5-8 m3 city unit reaches capacity before the end of the shift.
Body volume, compaction force, axle layout and bin lift interface are fixed around waste type, local bin size, stops per day and tipping point. LHD or RHD, air suspension, cold-start package or tropical cooling are available. Lead time is about 25-40 working days from down payment. Trade terms are FOB, CIF or DAP.
A Caribbean municipal sanitation department and local waste operator received one batch of compactor type garbage trucks in October 2025. After about 13 months in service, the units entered local sanitation service with strong compaction, a durable body and a fuel-efficient engine lowering operating cost. The client was satisfied with the delivery.
Q: What are the GVW and payload of the 10 m3 unit?
A: The 10 m3 4x2 rear loader runs at 12,490 kg GVW with a 4,990 kg payload.
Q: How does it differ from the 5-8 m3 city unit?
A: It carries a 10 m3 body and a 4,990 kg payload, compared with 5-8 m3 and 3,200 kg on the smaller 4x2 city unit.
Q: Is the body sealed against leachate?
A: Yes. The body has a rear door rubber seal and a sealed leachate sump with drain valve.
Q: Can the bin lift match local bins?
A: The lift handles 120-1,100 L bins in a 6-15 s cycle and the hopper, arms and rollers are matched to the bin standard used by the customer.
Q: What is the lead time?
A: About 25-40 working days from down payment, with FOB, CIF or DAP terms.
Q: What warranty is offered?
A: Major components carry a 12-month warranty; hydraulic components follow supplier terms.
Henan Elorry Industrial Co., LTD. | Tel: +86-13083602803 | WhatsApp: +86-16638078903 | Email: info@elorry-ind.com | Address: Zhengzhou City, Henan Province, China