{{ variable.name }}
| Type | Concrete Mixer Truck, Cement Mixer Truck, Transit Mixer, Truck Mixer, Ready Mix Truck, Drum Mixer Truck, Agitator Truck, 4x2 Concrete Mixer Truck, 6x4 Concrete Mixer Truck, 8x4 Concrete Mixer Truck, Self-Loading Mixer Truck | Model | Concrete Mixer Truck |
| Params | CONFIGURATION - Product family: concrete mixer truck (transit mixer) built on a commercial chassis; drum capacity quoted from 3 m³ to 18 m³ - Drive configuration: 4x2 for 3-6 m³ and city delivery; 6x4 for 6-12 m³ and regional plants; 8x4 for 10-18 m³ and high-output plants - GVW: 7,500-31,000 kg; kerb weight 7,500-17,000 kg depending on drum size and chassis - Overall dimensions: length 7,400-10,500 mm, width 2,500 mm, height 3,700-4,000 mm - Wheelbase: 3,950-5,400 mm; the 6x4 is quoted at 3,825+1,350 mm and the 8x4 at 1,800+3,600+1,350 mm - Cab: 2-3 seats, day cab standard with sleeper optional; left-hand or right-hand drive - Max speed: 80-90 km/h; the drum turns at agitating speed while the truck is moving DRUM AND MIXING - Drum: inclined-axis rotary drum, 12-16 degrees to the horizontal, charged at the front end and discharged at the rear - Drum volume: geometric 5-20 m³, rated mixing capacity 3-18 m³; industry practice rates the mixer at about 63 percent of gross drum volume and the agitator at up to 80 percent - Drum shell: 4-6 mm wear-resistant plate, end cover 6-8 mm; two-start helical blades welded to the shell - Drum speed: charging 12-15 rpm, mixing 8-12 rpm, agitating 1-3 rpm on the road; reversing the rotation discharges the batch - Mixing: 50-70 drum revolutions at mixing speed give a homogeneous batch; a minimum of 30 revolutions at mixing speed is required after any water addition - Slump retention: the drum is kept turning at agitating speed in transit; retention time depends on mix design, ambient temperature and admixture, and the discharge window is agreed per project CHARGING AND DISCHARGE - Charging rate: not less than 3 m³/min; feed hopper opening not less than 650 mm - Discharge rate: not less than 2 m³/min - Residual concrete in the drum: not more than 0.5 percent of the rated capacity - Discharge chute: swing type with 3-4 sections, slewing 180 degrees, discharge height 1.2-1.5 m and reach 2.0-3.5 m behind the rear axle - Hopper and chute: wear-resistant plate with bolted liners, replaceable on site - Drum guard, ladder and platform: full-perimeter guard, non-slip steps and a folding access platform WATER AND ADMIXTURE - Water tank: 400-450 L, pressurised by air or hand pump, with a washing-down hose and spray nozzle - Water supply: baric (pressure) water feed to the drum for slump adjustment; flow meter optional - Admixture: two-compartment tank with dosing pump optional; admixture is added at the plant or on site - Engine cooling: separate expansion tank, radiator capacity matched to tropical ambient conditions HYDRAULIC DRIVE - Drive: engine power take-off driving a variable-displacement axial-piston pump and a hydraulic motor through a planetary reducer; closed-loop hydrostatic transmission - Control: three-position lever or joystick for charge, mix, agitate, discharge and stop; drum speed steplessly adjustable - Cooling and filtration: hydraulic oil cooler with thermostatic fan; 10 micron return filter with clog indicator - Manual override: emergency hand pump to empty the drum if the engine or the hydraulic pump fails CHASSIS AND DRIVELINE - Engine: diesel, 180-400 hp (132-294 kW), 6-12 L displacement, Euro II to Euro V matched to local fuel quality - Transmission: manual with 6-10 forward speeds; automated manual optional - Axles: front 5,000-9,000 kg and rear 10,000-26,000 kg capacity; hub reduction and differential lock optional - Suspension: leaf springs; rear air suspension optional - Brakes: air brake with ABS, exhaust brake and spring parking brake; retarder optional - Steering and tires: hydraulic power steering; 9.00R20 to 12.00R20, 6-11 tires plus one spare - Fuel tank: 300-400 L; 24 V electrical system; air conditioner standard PERFORMANCE AND SAFETY - Gradability: 25-30 percent; minimum turning diameter 18-22 m - Drum rotation counter and discharge timer optional, so the batch history can be recorded per delivery - Safety: guard rails on the drum platform, emergency stop at the rear, reversing buzzer and rear camera optional QUALITY AND DELIVERY - Pre-shipment check: drum rotation and mixing trial, hydraulic pressure and leak test, charging and discharge rate check, residual test, brake test and road test - Warranty: 12 months for major components; hydraulic pump, motor and reducer covered under supplier terms - Lead time: about 30-45 working days from down payment - Export documents: invoice, packing list, bill of lading, certificate of origin and insurance - Trade terms: FOB, CIF or DAP; shipped by RoRo or bulk carrier, 1-3 units per shipment - Spare-parts kit: blade bolts, chute liner plates, seal kits, hydraulic hoses, filter set and water pump seal | Material | Drum shell: Q345 wear-resistant steel plate 4-6 mm, rolled and welded, with a 6-8 mm end cover and a reinforced charging mouth. Blades: two-start helical blades in wear-resistant steel, welded to the shell and braced at the cone. Chute and feed hopper: wear-resistant steel plate with bolted replaceable liners. Water tank: 400-450 L carbon steel with anti-corrosion coating. Frame: Q235/Q345 channel 6-8 mm, bolted to the chassis. Hydraulic cylinders: honed tubes with hard-chrome plated rods. Reducer: cast-iron housing with hardened planetary gears. Hoses: two-wire braided rubber with crimped fittings. Drum rollers and track rings: forged and hardened steel. Paint: shot-blast to Sa2.5, epoxy primer and polyurethane topcoat. Fasteners: galvanised; steps and platform in checker plate. |
| Applicable Industry | Ready-mixed concrete plants and batching stations. Building and civil construction contractors. Infrastructure projects: highways, bridges, metros, airports, dams and ports. Precast and concrete products plants. Mining and tunnel support works. Water conservancy and irrigation projects. Industrial plant construction, refineries and power stations. Municipal works and urban renewal. Rural road and housing programmes. Plant hire and equipment rental fleets. Construction logistics and material transport companies. Distributors, dealers and contractors' purchasing agents. Disaster relief and post-disaster reconstruction. Site-cast and small-volume pours served by the self-loading variant. | ||
1. One supplier for the whole drum range. 3-18 m³ on 4x2, 6x4 and 8x4 chassis, so a batching plant, a plant-hire fleet or a contractor buying its first mixer all order from one specification sheet and one spare-parts list. 2. Drum geometry set by the job, not by a catalogue page. The inclined-axis drum, the 12-16 degree angle and the two-start helical blades mix when the drum turns one way and discharge when it turns the other, so charging, mixing and discharging need no extra mechanism. 3. Charging and discharge rates quoted as minimums. Not less than 3 m³/min in and 2 m³/min out, with a 650 mm feed hopper, means a 10 m³ batch is loaded and placed inside the plant's cycle and the pour is not held up at the chute. 4. Residual concrete not more than 0.5 percent. What stays in the drum is concrete the customer paid for and cannot place, so the drum is emptied properly and the wash-down between batches is shorter. 5. Drum speed matched to every stage. 12-15 rpm for charging, 8-12 rpm for mixing, 1-3 rpm for agitation on the road; 50-70 revolutions at mixing speed give a homogeneous batch and at least 30 revolutions are allowed after any water addition, which is the practice ASTM C94-type delivery rules are built on. 6. Slump is managed on the road. A 400-450 L pressurised water tank and an optional admixture tank let the driver adjust workability at the site gate instead of rejecting the batch, and the drum keeps turning at agitating speed so the mix does not segregate in traffic. 7. Hydraulic drive that a local workshop can service. Power take-off, axial-piston pump, motor and planetary reducer in a closed loop; three-position lever or joystick control; a 10 micron return filter with clog indicator; and an emergency hand pump to empty the drum if the engine or pump fails on site. 8. Wear parts are consumables, not a redesign. Bolted chute liners, replaceable blades, drum rollers and track rings, seal kits and hoses ship as a spare-parts kit, so the truck keeps working in markets where the nearest dealer is a flight away. 9. Chassis matched to the market. 180-400 hp, 6-10 speed transmission, Euro II to Euro V according to fuel sulphur, left- or right-hand drive, tropical cooling and a cold-start package where winter work is expected. 10. Built to be checked before it ships. Every unit gets a drum rotation and mixing trial, a hydraulic pressure and leak test, a charging and discharge rate check, a residual test, a brake test and a road test, and the report travels with the documents. 11. Export handling in one set. Invoice, packing list, bill of lading, certificate of origin and insurance are prepared together; units ship by RoRo or bulk carrier under FOB, CIF or DAP terms; the drum is cleaned, the hydraulic system protected and the chute and access ladder packed for the sea passage. 12. Advice before the order. Sales engineers ask the batch size, the plant cycle time, the haul distance and road gradient, the mix design and slump, the local axle-load rules and the climate, then fix drum volume, drive configuration, water and admixture capacity and discharge chute length, so the truck is not bought twice. 13. Units are already in service. A 10 m³ mixer truck is in operation with a customer in Isabela, Philippines, and 8 m³ mixers have been shipped in mixed batches with dump trucks; the same specification route is available for other markets.

elorry-concrete-mixer-truck

elorry-concrete-mixer-truck

elorry-concrete-mixer-truck

elorry-concrete-mixer-truck

elorry-concrete-mixer-truck

elorry-concrete-mixer-truck

elorry-concrete-mixer-truck

elorry-concrete-mixer-truck

elorry-concrete-mixer-truck

elorry-concrete-mixer-truck

elorry-concrete-mixer-truck