{{ variable.name }}
Container-exchange refuse truck for urban and rural collection, transfer stations and site cleanup.
This hook lift garbage truck is built around container exchange rather than compaction. It handles 3-20 m3 hooklift containers on 4x2 or 6x4 chassis, with payload covering 3,000-18,000 kg. A high-strength hook arm and hydraulic system allow fast container exchange for urban and rural waste collection, transfer stations, construction debris and industrial sites. The chassis can be supplied with left-hand or right-hand drive and 90-300 hp diesel engines.
One truck can work with multiple container types and sizes.
The hook arm replaces manual handling and shortens collection time.
Payload from 3,000-18,000 kg and GVW from 4,500-26,000 kg.
Gear pump, hard chrome-plated rods and imported seal kits.
Container handling can be matched to loaders and yard equipment.
Engines cover Euro II to Euro V for different fuel markets.
| Parameter | Specification |
|---|---|
| Body type | Hook-lift |
| Container range | 3-20 m3 |
| Drive | 4x2 or 6x4 |
| Payload | 3,000-18,000 kg |
| GVW range | 4,500-26,000 kg |
| Hydraulic pressure | 18-21 MPa |
| Hydraulic tank | 60-120 L with return filter and oil cooler |
| Control | Manual multi-way valve standard; joystick optional |
| Engine | Diesel 90-300 hp, Euro II to Euro V |
| Cab | 2-3 persons, LHD or RHD |
| Working temperature | Minus 20 to plus 50 degrees C |
Hook-lift is one of six body types available alongside rear-loader compactor, front-loader, side-loader, swing-arm and skip-loader. Body capacity across the range is 3-20 m3. The hook-lift unit can be quoted on 4x2 for 3,000-8,000 kg payload or 6x4 for 10,000-18,000 kg payload.
The hook-lift body uses Q235/Q345 carbon steel, with a sub-frame of Q235 channel bolted to the chassis rails. Hydraulic cylinders use 45# steel barrels, hard chrome-plated piston rods and imported seal kits. Hydraulic piping is high-pressure rubber hose with steel fittings and steel tube lines on the chassis. The pump and valves are cast iron gear pump and multi-way valve. Body finish is shot-blasted, epoxy primer and polyurethane topcoat.
Urban and rural waste collection with fast container exchange, transfer stations, construction and demolition debris, industrial plant housekeeping, factory scrap handling, site clearance, disaster relief and post-flood cleanup, and municipal sanitation where one truck must serve multiple container points.
Container handling can be matched to the site equipment and container types used by the customer. Axle layout, body volume and hydraulic controls are fixed around payload, route and tipping point. LHD or RHD, air suspension, cold-start package or tropical cooling are available. Lead time is about 25-40 working days from down payment. Trade terms are FOB, CIF or DAP.
A Peru municipal sanitation department and waste management contractor received one batch of hook-loader type garbage trucks, shipped in June 2026. After about 5 months in service, the operator reported higher collection efficiency and lower labour input. The high-strength hook arm is compatible with multiple container types, with easy maintenance and a durable chassis.
Q: Does this hook lift truck compact waste?
A: No. The hook lift is a container-exchange body. For compaction, choose a rear-loader compactor model.
Q: What container sizes can it handle?
A: The range covers 3-20 m3 containers, and the hook arm can be matched to the container types used on site.
Q: What chassis options are available?
A: 4x2 for 3,000-8,000 kg payload and 6x4 for 10,000-18,000 kg payload, with LHD or RHD.
Q: What hydraulic pressure does it use?
A: The gear pump system works at 18-21 MPa with hard chrome-plated piston rods and imported seals.
Q: Can it work in hot climates?
A: The working temperature range is minus 20 to plus 50 degrees C with tropical cooling or cold-start package.
Q: What is the lead time?
A: About 25-40 working days from down payment.
Henan Elorry Industrial Co., LTD. | Tel: +86-13083602803 | WhatsApp: +86-16638078903 | Email: info@elorry-ind.com | Address: Zhengzhou City, Henan Province, China