{{ variable.name }}
This is the multi-temperature configuration of the insulated refrigerated body: a partition wall with its own evaporator and door divides the cargo space so one truck delivers -18 C frozen goods and 0-4 C chilled goods on the same run. It is the layout most supermarket and food-service routes actually use, and it is available across body volumes from 10 to 45 m3 on 4x2 or 6x4 chassis.

| Item | Specification |
|---|---|
| Configuration | Multi-temperature insulated body with partition wall, separate evaporator and door |
| Temperature zones | Frozen side to -18 C; chilled side 0-4 C within the +12 C to -18 C body range |
| Body volume | 10-45 m3 line; about 14 m3 at 3,800 mm and about 31 m3 at 6,000 mm body length |
| Body internal dimensions | Length 3,800-9,600 mm, width 2,000-2,450 mm, height 1,800-2,500 mm |
| Drive and payload | 4x2 for 3,000-6,000 kg payload; 6x4 for 15,000-25,000 kg |
| Panel and floor | FRP/GRP 1.5-2.0 mm skins, polyurethane 80-120 mm (100 mm standard); floor 100-150 mm |
| Refrigeration units | Engine-driven non-independent standard; self-powered diesel, electric standby or eutectic plates optional |
| Control | Digital thermostat and cab-mounted controller; temperature recorder and remote monitoring optional |
| Airflow | Evaporator with two or three fans, T-floor or air ducts in each compartment |
| Doors and seals | Rear double doors standard; side door optional; multi-lip EPDM gasket, heated seal optional |
| Drainage | Stainless or PVC drain plugs, one to four depending on body length |
| Working ambient | -20 C to 45 C with tropical cooling and cold-start packages |
The body can be ordered at any volume from 10 to 45 m3, with partition layout, number of compartments and unit capacity fixed against the cargo mix, the ambient and the daily door-opening count. Further options are side door, side curtain, rear tail-lift, meat rail and hooks, aluminium T-section floor rail, shelving, cargo securing rails, LED interior lighting and a heated door seal for deep-frozen work.
Panels are high-pressure foamed polyurethane at 40-45 kg/m3 between FRP/GRP skins of 1.5-2.0 mm, with seamless joints and no cold bridge at the frame. Interior lining is food-grade FRP or stainless steel 304 with coved corners for washing down, so the two compartments can be cleaned between drops. The rear door frame and posts are stainless steel with a multi-lip EPDM gasket and stainless hinges, locks and handles. The sub-frame is a Q235 channel bolted to the chassis rails with anti-vibration pads; the chassis frame is Q235/Q345 steel 6-8 mm.
Supermarket chain and convenience store replenishment, food service and catering suppliers, hotel and restaurant delivery, dairy, cheese and chilled beverages, fruit and vegetables, meat, poultry and seafood, bakery and confectionery, frozen food distribution, third-party cold-chain distribution, and relief or field catering where one vehicle must cover several temperature bands.
Partition position, compartment count and evaporator capacity are set per order. Left-hand or right-hand drive, Euro II to Euro V engines matched to local fuel, tropical cooling for 45 C ambient, cold-start packages, R404A or a low-GWP refrigerant on request, and an English manual are offered with every unit. A spare-parts kit with filters, belts, door gaskets, thermostats, fan motors and fuses can ship together with the truck.
A batch of refrigerated trucks shipped in February 2025 to a food and pharmaceutical distributor went through full ex-works inspection before loading and was ready to run on arrival, reducing downtime. The application covered food, pharmaceutical and temperature-sensitive cargo across different climates, with stable temperature control and climate adaptability recorded as the strengths.
A partition wall with its own evaporator and door splits the body, so -18 C frozen goods and 0-4 C chilled goods travel on the same run without mixing air.
It is fitted at build stage together with the second evaporator, so the refrigeration layout and body are prepared together rather than modified locally.
Pull-down of about 30-60 minutes and stability within plus or minus 1 C of the set point at normal door-opening frequency, supported by a multi-lip EPDM gasket, T-floor air channels and an optional strip curtain.
Body volumes from 10 to 45 m3, with internal length from 3,800 to 9,600 mm. Unit capacity is matched to volume, ambient and door-opening frequency.
A digital thermostat and cab-mounted controller are standard; a temperature recorder and remote monitoring are optional.
About 30-40 working days from down payment, with 12-month warranty on major components. Units ship by RoRo or break-bulk under FOB, CIF or DAP terms.
Tell us the frozen and chilled split, the number of stops and the door-opening frequency per day, so partition position and evaporator capacity can be fixed.
Henan Elorry Industrial Co., Ltd., Zhengzhou, Henan, China
Tel: +86-13083602803 WhatsApp: +86-16638078903
Email: info@elorry-ind.com Website: www.elorry-ind.com