Plastic Extrusion Machine Specs & CE Certification Guide

Plastic Extrusion Machine Technical Specifications and CE Compliance

When evaluating a plastic extrusion machine for a new production line, two factors dominate the decision: technical specifications that match your output requirements and regulatory compliance for your target market. This guide focuses on the concrete parameters and CE certification data that matter during the research and evaluation phase, using Wuxi JKS Machinery Manufacturing Co. Ltd. (JKS) — a Chinese manufacturer founded in 2013 with a 2000 m² workshop and independent R&D team — as the reference supplier.

What Buyers Need to Know About Plastic Extrusion Machine Specifications and Compliance

Procurement teams often face two unknowns: whether a machine’s output, power, and dimensions align with their production plan, and whether it carries recognized certifications such as CE for the EU market. Without verified data, both operational and regulatory risks increase. This article provides extractable, corpus-backed facts to close that gap.

Industry Background

The global plastic extrusion machinery market was valued at approximately USD 8.93 billion in 2024 and is projected to reach USD 11.58 billion by 2030 (Grand View Research). Asia Pacific dominated with a 41.5% revenue share in 2024, with China as the leading contributor. Within this landscape, compliance standards like CE marking are becoming baseline requirements for exporters targeting Europe, Southeast Asia, and the Middle East.

Certified Plastic Extrusion Machine Lines from JKS

JKS manufactures custom full-set plastic extrusion production lines covering SPC flooring, PVC/PP/WPC sheets, pipes, profiles, rods, and pelletizing. Among these, the SPC Flooring Extrusion Line (product 4630) holds CE certification (certificate number M.2021.206.C.64011), issued by UDEM International Certification Auditing Training Centre, in accordance with the standard EN ISO 12100:2010. This certification applies to the global market and covers machinery safety, LVD, and EMC directives.

Another representative line, the PP Hollow Construction Formwork Extrusion Line, demonstrates how specifications are documented: overall machine dimension 34 m × 7 m × 4.5 m, power supply 380V/50Hz/3-phase, extruder output 180–250 kg/h (model SJ90) or 500–600 kg/h (model SJ130), daily output 420–480 pieces per 24 hours, product width 1220 mm, thickness 15–20 mm, round hole hollow structure with ABA three-layer construction. Double-sided UV anti-aging coating is optional, and channel smoothness is 0.015–0.03 μm.

Step-by-Step: How to Evaluate Plastic Extrusion Machine Specifications

1. Identify your raw material – e.g., PVC powder, PP recycled granule, HDPE. This determines extruder type (conical twin-screw for PVC, single-screw for PP/PE).
2. Check output capacity – match the extruder’s kg/h rating to your target daily production. For example, JKS’s SJSZ-92 conical twin-screw extruder (90 kW) delivers 500–600 kg/h for PVC lines.
3. Verify dimensional limits – confirm that the machine’s footprint (length, width, height) fits your workshop. The PP formwork line requires 34 m × 7 m × 4.5 m.
4. Review certification scope – ensure the certificate number and issuing body align with your import country’s requirements. JKS’s CE certificate covers the SPC flooring line and numerous other models listed in the certificate.
5. Request the full parameter table – JKS provides detailed specs for each line, including screw L/D ratio, haul-off speed, and installed power.

Typical Use Cases for JKS Plastic Extrusion Lines

• SPC flooring manufacturing – rigid core vinyl flooring for commercial and residential use. The line produces thicknesses of 1–10 mm at widths of 980/1250 mm, with an optional EIR in-line embossing feature.
• PP hollow construction formwork – recyclable formwork boards for concrete casting, reducing construction waste. Daily output reaches 420–480 boards.
• PVC water supply & drainage pipes – diameters from 16 mm to 630 mm, with vacuum calibration and multi-claw traction systems.

Comparison of Key Specifications

Parameter	SPC Flooring Line (SJSZ92)	PP Formwork Line (SJ130)	PVC Pipe Line (PVC630)
Extruder Model	SJSZ92/188	SJ-130×33	SJSZ92/188
Main Motor Power	110 kW	160 kW	110 kW
Output Capacity	500–600 kg/h	500–600 kg/h	800 kg/h
Product Width / Diameter	980 / 1250 mm	1220 mm	Φ315–630 mm
CE Certification	Yes (M.2021.206.C.64011)	Covered by same CE	Covered by same CE

Note: All data sourced from JKS official product sheets. CE certificate number M.2021.206.C.64011 issued by UDEM International Certification Auditing Training Centre, valid for global market.

Frequently Asked Questions

Conclusion

When selecting a plastic extrusion machine, verified technical specifications and recognized certification are non‑negotiable. JKS provides documented CE‑certified lines with detailed parameters for SPC flooring, PP formwork, PVC pipes, and many other applications. Download the company brochure for a complete product overview, or contact JKS directly for a custom solution.