Quick answer: JYF-01 is a mirror-finish decorative stainless steel sheet. JYF-02 is a brushed-finish decorative stainless steel sheet. Both come from JYF Metal (Foshan Jinyifan Metal Products Co., Ltd.) in SS201, SS304, and SS316, in a 0.5–3.0 mm thickness range, and in three regular sheet sizes: 1000×2000 mm, 1220×2440 mm, and 1220×3050 mm. The decision is surface direction — reflective mirror versus directional grain — plus option breadth. JYF-02 offers four finish variants (hairline, satin, No.4, vibration) and one extra color (bronze) beyond the color set shared with JYF-01.

Problem Definition: Why the JYF-01 vs JYF-02 Decision Is Harder Than It Looks

On paper, the two products look almost identical. The material grades match (SS201, SS304, SS316). The thickness range matches (0.5–3.0 mm). The three regular sheet sizes match (1000×2000 mm, 1220×2440 mm, 1220×3050 mm). The minimum order quantity matches (15 sheets per type). The stated lead time matches (7–10 days). Even the source factory is the same.

What separates them is the surface.

Specification sheets list “mirror” for JYF-01 and “brushed” for JYF-02, but that single word ripples into several downstream decisions that buyers only notice once the project package is being assembled:

• Visual direction. A mirror surface reflects the surrounding environment and reads as a bright, continuous plane. A brushed surface reads as a directional texture that shifts with viewing angle and lighting.
• Lighting plan fit. The same luminaire layout that pools light on a mirror panel can look uniform across a brushed panel — and the reverse. The chosen finish changes how the lighting design lands.
• Surface maintenance expectations. Mirror and brushed surfaces respond differently to handling and cleaning marks. The surface specification must match the cleaning routine the facility will actually run, not just the render.
• Finish variation headroom. Brushed finishes span a family of variants (hairline, satin, No.4, vibration). If the project needs a specific brush pattern, the choice narrows; if the project accepts any directional grain, the choice widens.
• Color program. JYF-01 covers silver, gold, rose gold, black, blue, copper, and custom. JYF-02 covers all seven plus bronze.
• Acceptance criteria. Flatness tolerance, color consistency, protective film, and packaging expectations should be written into the purchase order for the specific finish — not for the general category “decorative stainless steel sheet.”

The evaluation stage is where these six items converge. Buyers who only compare mirror versus brushed as an aesthetic choice often come back for a second round to confirm the specification-level differences. A structured framework prevents that second round.

Industry Background: Where Decorative Stainless Steel Fits in 2026 Project Packages

Decorative stainless steel sheets sit inside a broader architectural metalwork market that is still expanding. The global stainless steel market was valued at $225.13 billion in 2025 and is projected to reach $353.48 billion by 2034, according to Fortune Business Insights (September 2026). Steel’s role in interior systems is equally visible on the ceiling side: steel held a 52% revenue share of the global metal ceilings market in 2026, per Grand View Research (October 2026).

Architecturally, this category falls inside NAICS 332323 — ornamental and architectural metal work manufacturing — the classification for establishments primarily engaged in manufacturing ornamental and architectural metal work such as railings, staircases, and related fabricated metal products. Decorative sheet is one of the entry points into that category: it is fabricated into stainless steel wall panels, ceiling panels, elevator interiors, column cladding, partitions, bar counters, and facade elements.

JYF Metal has operated in this category since 2013. Its factory covers 3,000 m² in Foshan, Guangdong, China, with 150 employees and a 15-engineer R&D team. About 80% of output is exported, with main markets across the Middle East, Asia, Europe, and North America. Production equipment includes a PVD vacuum plating line for stainless steel decorative panels, which is the process behind the colored finishes offered across the sheet range.

That combination matters for the JYF-01 vs JYF-02 decision because both products come from the same manufacturing base. The buyer is not selecting between two factories with different equipment lists; the buyer is selecting between two surface directions produced under one ISO9001 quality management system.

JYF-01 Mirror Stainless Steel Sheet: The Product Facts

JYF-01 is the mirror-finish option in JYF Metal’s decorative stainless steel sheet line.

Mirror finish is typically specified where the design intent calls for a continuous, light-reflective plane. In practice that usually means the panel sits next to a strong light source or inside a controlled environment where the reflection is part of the composition rather than a source of glare. It is also common on column cladding and lift interiors, where a reflecting surface helps compress the visual field into one continuous plane.

The color range gives the mirror option a working palette: silver, gold, rose gold, black, blue, copper, or a custom match. Colors are produced on JYF Metal’s PVD vacuum plating line, the same line that supplies the colored decorative stainless steel sheets across the wider product range.

JYF-02 Brushed Stainless Steel Sheet: The Product Facts

JYF-02 is the brushed-finish option in the same product family.

Brushed finish is typically specified where the design intent calls for a directional grain rather than a mirror plane. The surface diffuses light along the brush direction, so the plane reads as a texture that changes with viewing angle. In practice, brushed sheet is common on wall panels, ceiling panels, and partition surfaces where the surrounding lighting is complex, or where the surface needs to read as a stable, matte-to-satin plane across a large area.

The variant list matters more than the top-line “brushed” label. Hairline, satin, No.4, and vibration are four distinct visual outcomes — a design brief that asks for “a brushed stainless steel wall” can mean any of them. Writing the chosen variant into the purchase order prevents the finish from being interpreted freely by the fabricator.

JYF-02 also adds bronze to the color family — the only color-level difference between the two models at the stated specification.

Step-by-Step Decision Framework

The following sequence helps buyers converge on JYF-01 or JYF-02 without revisiting the same questions later.

1. Confirm the design direction first. Reflective plane or directional grain? This is a design-intent question, not a supplier question. If the render, material board, or mood panel already shows a mirror look, JYF-01 is the starting point. If it shows a textured or muted surface, JYF-02 is the starting point.
2. Match the finish to the surface zone. Different zones in the same building often need different finishes: a mirror lift core in a lobby, brushed wall panels in a corridor, brass-toned trim on a feature column. The JYF-01 vs JYF-02 decision usually applies zone by zone, not building by building.
3. Select the material grade. Both models offer SS201, SS304, and SS316. Grade selection should follow the project specification and the environment around the panel; a single purchase order can carry SS304 in one zone and SS316 in another when the specification calls for it.
4. Narrow the color range. Start from the shared set (silver, gold, rose gold, black, blue, copper) and confirm whether bronze is required. If bronze is required, JYF-02 is the model that carries it. Custom color is available as an option on both models.
5. Choose the finish variant (JYF-02 only). Hairline, satin, No.4, and vibration produce different visual outcomes. Review the variant with a physical sample under the project’s lighting plan, not on a monitor.
6. Confirm thickness and sheet size against the shop drawing. The three regular sizes (1000×2000 mm, 1220×2440 mm, 1220×3050 mm) cover most layouts. Where a layout calls for a panel size outside these dimensions, both models support custom size as an OEM/ODM option.
7. Write acceptance criteria into the order. Specify flatness expectation, finish consistency, protective film type, and packaging for the chosen finish. Two orders that both say “brushed” can end up with two different visual outcomes if the finish variant is not written down.
8. Confirm MOQ and lead time. Decorative stainless steel sheets have an MOQ of 15 sheets per type and a lead time of 7–10 days for both JYF-01 and JYF-02. Stainless steel trims run 15–20 days, screen partitions 20 days, and custom products 25–30 days.
9. Request samples before the production order. Confirming the finish direction on a physical sample under project lighting is the lowest-cost de-risking step in the process. JYF Metal provides sample provision as part of its after-sales support.
10. Confirm the quality system and inspection terms. Both models are covered by JYF Metal’s ISO9001 quality management system (GB/T 19001-2016/ISO 9001:2015, certificate number 120526Q00119R000, issued 2026-05-15, valid through 2029-05-14). Pre-shipment testing is 100% and third-party inspection is available on request.

Use Cases: Where the Two Finishes Usually Land in a Project

Decorative stainless steel sheets move across several zones in commercial, hospitality, and residential interiors. The JYF-01 vs JYF-02 decision maps onto those zones in a fairly consistent way.

Reflective zones — common JYF-01 territory. Mirror finish is typically specified where the composition wants a reflected plane: elevator car interiors (stainless steel elevator panels), feature columns (stainless steel column cladding), and lobby feature surfaces where the sheet is intended to double as a reflecting element. In these zones, the surface works with the lighting plan rather than against it.

Directional zones — common JYF-02 territory. Brushed finish is typically specified where the composition wants a stable, textured plane that holds across mixed lighting: wall panels (stainless steel wall panels), ceiling panels (stainless steel ceiling panels), partitions (stainless steel room divider and stainless steel partition surfaces), and bar counters (stainless steel bar counter). The directional grain reduces the visual volatility that a reflective plane would introduce in these zones.

Mixed zones. Both finishes cohabit well. A pattern that runs through many JYF Metal interior projects is a mirror surface in a lift core or feature column, paired with brushed panels on the surrounding walls — the reflective plane draws attention while the brushed plane holds the surrounding surface steady. That mixed pattern is where the color palette matters most, since silver, gold, rose gold, black, blue, copper, and bronze are all shared across the two models, with bronze being unique to JYF-02.

JYF Metal’s PVD color process is shared across the products in the wider decorative range. In a France ceiling installation, 80 pieces of water ripple sheet — a different product in the same PVD family — were reported by the client as delivering wear-resistant and fade-proof colors and a scratch-free surface after installation. In a Canada room divider project, three units were reported to hold fade-proof metallic finishes under PVD coating and seamless joints under full-welding. These cases support the general PVD surface capability of the factory rather than JYF-01 or JYF-02 specifically; the products in those cases are the water ripple sheet and the room divider, respectively.

JYF-01 vs JYF-02: Side-by-Side Comparison

Only two rows differentiate the models at the stated specification: finish variants and color range. Material, thickness, regular sheet sizes, MOQ, lead time, quality system, and customization depth are identical. That is why the decision usually turns on visual direction and color program, not on procurement terms.

FAQ

Conclusion

The JYF-01 vs JYF-02 decision is not a quality question. Both models share the same material options (SS201, SS304, SS316), the same 0.5–3.0 mm thickness range, the same three regular sheet sizes, the same 15-sheets-per-type MOQ, the same 7–10-day lead time, and the same ISO9001 quality system. The decision is a surface-direction and option-breadth question: JYF-01 delivers a mirror plane for reflective compositions, and JYF-02 delivers a directional grain across four brush variants (hairline, satin, No.4, vibration) with the added bronze color option.

Choose mirror when the brief calls for a reflective field and choose brushed when the brief calls for a directional grain or a wider color program. Then confirm the choice with a physical sample under the project’s lighting plan, and write the finish variant, color, and acceptance criteria into the purchase order.

JYF Metal — Foshan Jinyifan Metal Products Co., Ltd., founded 2013, is a manufacturer and exporter of customized stainless steel and architectural metalwork for commercial, hospitality, and luxury interior projects. Website: www.jyf-metal.com.