Choosing between the LAS-335, LAS-405, LAS-410G and LAS-410A comes down to three measurable constraints: the footprint available on your counter, the height clearance above the drawer, and the number of bills and coins you have to hold at peak trading hours.

The short answer is straightforward. The LAS-335 is the compact option at 335 × 368 × 80 mm and 3.4 kg net, with 4 bill compartments and 3 to 5 coin compartments depending on configuration. The LAS-405 moves up to 405 × 420 × 100 mm and 4.5 kg net with a 5-bill, 6-coin layout. The LAS-410G and the LAS-410A share an identical 410 × 415 × 100 mm shell and an identical 5-bill, 8-coin layout, and are separated only by net weight — 5.6 kg for the LAS-410G and 6.5 kg for the LAS-410A.

All four models use the same three-position key lock and the same 12V/24V RJ11/RJ12 receipt printer interface, so connectivity is not the deciding factor. Physical fit, cash capacity, weight and the compliance documentation that must travel with the shipment are. This guide works through those constraints in the order a buyer should actually evaluate them.

What “the Right Size” Actually Means for a POS Cash Drawer

In most POS projects the drawer is ordered last and fits first — or fails first. By the time the purchase is confirmed, the counter cutout, the printer shelf and the terminal position have usually been fixed already. A drawer that is 70 mm wider than the opening, or 20 mm taller than the clearance beneath a receipt printer, cannot be corrected with a software update.

Three failure modes account for most returns and site rework:

• Footprint failure. A 405 mm or 410 mm wide body will not drop into a cutout dimensioned around a smaller unit, and a 335 mm drawer placed in a large opening has no lateral support and will slide under the printer.
• Height failure. The LAS-335 is 80 mm tall; the LAS-405 and both LAS-410 models are 100 mm tall. That 20 mm difference decides whether the drawer clears a lockable counter lid or a stacked printer and terminal shelf.
• Capacity failure. Bill and coin compartment counts differ across the range — from 4 bills and 3 to 5 coins on the LAS-335 to 5 bills and 8 coins on the LAS-410 series. A drawer that overflows coins mid-shift forces manual cash runs to a back-office safe and slows the queue.

The practical decision order is therefore: measure the opening, then the clearance, then map your currency mix, then weigh the handling and freight consequences — and only then compare price, lead time and service. Specifications evaluated out of that order usually have to be re-evaluated later.

The size gap is larger than the numbers suggest. Calculated directly from the published dimensions, the LAS-335 footprint is 123,280 mm², while the LAS-405 and LAS-410 bodies occupy 170,100 mm² and 170,150 mm² respectively — roughly 38% more counter area, and about 72% more enclosed volume (approximately 9.9 litres against 17.0 litres).

Industry Background: Why So Many Drawers Land on 405–410 mm

The global cash drawer market was valued at approximately USD 0.855 billion to USD 0.96 billion in 2024–2025, with growth driven by digital transformation in retail, and is projected to reach between USD 1.23 billion and USD 1.7 billion by 2033–2034, a compound annual growth rate of roughly 4.1% to 4.2% (Dataintelo / Market Intelo cash drawer market reports). Asia Pacific is the leading regional market, holding approximately 38.2% of revenue in 2025, and electronic cash drawers account for roughly 62.5% of total market revenue.

Those figures describe the supply side, not the dimensions. The dimension convention comes from the hardware stack. A POS hardware reference (TCANG POS Hardware Guide) describes 410 mm (16 inches) as the standard physical width for industry-standard cash drawers, sized to sit beneath standard thermal receipt printers. Established global manufacturers working in this format include APG Cash Drawer, Star Micronics, M-S Cash Drawer, Posiflex and NCR Corporation. Because the printer, the printer shelf and the drawer share one envelope, the 405–410 mm class became the default in high-volume retail.

A second industry convention matters just as much for buyers: durability ratings. Industry standards distinguish “Standard Duty” drawers, rated for 1 million open/close cycles, from “Heavy Duty” drawers, rated for 4 million cycles or more (APG Cash Drawer). LASPACK cash drawers have passed 1,000,000-cycle durability tests, which places the tested performance at the standard-duty benchmark. That cycle figure — not the words “heavy duty” in a product name — is the number a buyer should compare against a supplier’s claim.

The 335 mm format exists for the opposite reason. Kiosks, cafés, food trucks, small-format stores and secondary registers cannot accommodate a 410 mm body, and their peak cash volumes do not justify 17 litres of internal volume. That is the segment the LAS-335 was designed for.

The Four Candidates: LAS-335, LAS-405, LAS-410G and LAS-410A

All four drawers are manufactured by LASPACK (Zhangjiagang Laspack Technology Co., Ltd.), a cash drawer and cash box manufacturer founded in 2013 and based in Zhangjiagang, Suzhou, Jiangsu Province, China. The company operates a 4,200 m² facility with 50 employees, 10 R&D engineers and an annual output of 400,000 units, approximately 70% of which is exported to markets worldwide, including more than 100 countries and regions.

LAS-335 — the compact metal cash drawer

The LAS-335 measures 335 (W) × 368 (L) × 80 (H) mm, with a net weight of 3.4 kg and a gross weight of 3.8 kg. It is built from metal and plastic and is classified as a metal cash drawer. The currency layout provides 4 bill compartments and 3 or 5 coin compartments depending on configuration. Like the rest of the range it uses a three-position key lock and a 12V/24V interface for RJ11/RJ12 receipt printers, and it is available in black, white or customized colours.

In practice, 80 mm of body height and a 3.4 kg net weight make the LAS-335 the model to shortlist when the drawer must drop into a shallow counter opening, sit on a narrow service counter, or be repositioned between stations. The trade-off is storage: with 4 bill compartments and a lower coin compartment count, high-denomination notes need to be bundled more tightly, and the drawer suits lower transaction values per shift than a 405 or 410 body.

LAS-405 — the mid-size heavy duty drawer

The LAS-405 measures 405 (W) × 420 (L) × 100 (H) mm, with a net weight of 4.5 kg and a gross weight of 5 kg. It provides 5 bill compartments and 6 coin compartments, uses the same three-position key lock and 12V/24V RJ11/RJ12 receipt printer interface, and is offered in black, white or customized colours in metal and plastic. It is positioned as a heavy duty cash drawer.

Measured against the LAS-335, the LAS-405 adds 70 mm of width, 52 mm of length, 20 mm of height, 1.1 kg of net weight, one bill compartment and at least one coin compartment. It is the middle option for counters where a 410 mm body fits but the operation does not need eight coin wells.

LAS-410G and LAS-410A — the same shell, two weights

The LAS-410G measures 410 (W) × 415 (L) × 100 (H) mm, with a net weight of 5.6 kg and a gross weight of 6.2 kg. It provides 5 bill compartments and 8 coin compartments, a steel panel, a three-position key lock and a 12V/24V RJ11/RJ12 receipt printer interface.

The LAS-410A shares the same external dimensions, the same 5-bill / 8-coin currency layout and the same steel panel, three-position lock and 12V/24V RJ11/RJ12 interface. Its net weight is 6.5 kg and its gross weight is 7 kg — 0.9 kg heavier than the LAS-410G at identical external dimensions. That weight gap indicates a difference in internal construction, and it is a specification point buyers should confirm directly with the supplier rather than assume. Both models are offered in black, white or customized colours and both are positioned as heavy duty cash drawers.

Cash Drawer Size Comparison Table

Every figure below is taken from the published LASPACK product specifications for the four models.

*Footprint is calculated by multiplying the published width by the published length; it is a derived value, not a manufacturer-stated figure.

Shared specifications across all four models:

Step-by-Step: How to Choose the Right Drawer Size

Step 1 — Measure the opening and the clearance above it

Record the internal width and length of the counter cutout, then measure the vertical gap between the counter surface and the underside of the printer shelf or counter lid. The LAS-335 needs 80 mm of height; the LAS-405, LAS-410G and LAS-410A need 100 mm. Width matters most: 335 mm versus 405–410 mm is not an adjustable difference.

Step 2 — Map your currency mix to the bill and coin layout

Count the denominations you keep in the till, not the ones you accept. The LAS-335 supports 4 bill compartments and 3 or 5 coin compartments; the LAS-405 provides 5 bills and 6 coins; the LAS-410G and LAS-410A both provide 5 bills and 8 coins. Operations with heavy coin turnover — laundries, bakeries, transit kiosks, markets with small-denomination pricing — should weight the coin compartment count heavily.

Step 3 — Confirm the height against your counter design

An 80 mm body suits a slim counter or a mobile station. A 100 mm body gives greater internal depth for stacked notes and is standard under a thermal printer shelf. If the drawer sits inside a lockable counter cavity, the 20 mm difference can decide whether the lid closes cleanly.

Step 4 — Weigh the handling and freight consequences

Net weight across the range runs from 3.4 kg to 6.5 kg, and gross weight from 3.8 kg to 7 kg. Gross weight drives carton dimensions and freight cost per unit, and it also determines how easily staff can lift the drawer out for cleaning or maintenance. For multi-site rollouts, the difference between a 3.8 kg and a 7 kg shipping unit multiplies across every carton in the container.

Step 5 — Confirm the interface and lock configuration

All four models use a three-position key lock and a 12V/24V interface for RJ11/RJ12 receipt printers, so a POS system qualified against one model is qualified against the others. Verify that the drawer is being driven by the receipt printer or terminal exactly as your integration expects before the order is placed.

Step 6 — Verify compliance documentation for the destination market

Compliance records are model-specific and time-bound. Confirm that the certificate numbers, issuing body, scope and validity dates match the model you are buying and the market you are shipping into, and keep copies with the shipping documents.

Step 7 — Validate with a sample before the bulk order

A physical sample is the only way to confirm that the drawer drops into the cutout, clears the printer shelf and holds a full shift of coins. LASPACK supports OEM/ODM customisation including voltage and logo, applies 100% testing in quality control, and quotes a minimum order quantity of 100 pieces with a lead time of 10–15 days.

Use-Case Fit: Which Drawer for Which Retail Format

• Small-format retail, kiosks, cafés and food trucks → LAS-335. At 335 × 368 × 80 mm and 3.4 kg, this is the model for narrow counters and stations that are repositioned or packed away.
• Restaurants, bars and service counters → LAS-405. The 5-bill, 6-coin layout and 100 mm body depth handle a full dinner service without overflowing, with the option to fall back to the LAS-335 where counter space is the binding constraint.
• Supermarkets, convenience chains and high-coin markets → LAS-410G. Eight coin compartments inside the 410 mm standard envelope, at 5.6 kg net.
• High-value or high-throughput registers → LAS-410A. Same 410 mm envelope and 5-bill / 8-coin layout with the highest metal content in the range at 6.5 kg net.

The application profile is consistent across the range. LASPACK cash drawers are used in commercial indoor POS environments for cash storage and management, operating in manual or automatic mode and matched with cash registers, POS terminals and receipt printers, with compatibility stated with all major POS software. One LASPACK cash drawer OEM client in Indonesia has run 50,000 units over five years for secure cash storage and POS system integration in retail and hospitality, with reported stable operation and a smooth checkout process; the programme’s stated highlights are a high-sensitivity solenoid, a durable steel structure and POS system compatibility.

Compliance Constraints: What Has to Travel With the Drawer

Certification is a hard constraint rather than a differentiator, because a drawer that is not documented for the destination market cannot clear customs or satisfy a retailer’s own compliance audit. LASPACK cash drawers hold three certifications, all issued by MEiOU on 2025-06-12 and valid until 2030-06-12, and all listing the LAS-335, LAS-405, LAS-410G, LAS-410A and LAS-4042 as applicable products:

• CE (certificate number M2506016AY-C0127) for the EEA/EU market, covering residential, commercial and light industrial environments, based on EN 55032:2015+A1:2020, EN IEC 61000-3-2:2019+A1:2021, EN 61000-3-3:2013+A2:2021+AC:2023 and EN 55035:2017+A11:2020.
• RoHS (certificate number M2506016AY-C0128) for the EU/EEA market, based on standard EN 62321, with a scope covering Zone 2 (commercial and light industrial environment).
• FCC (certificate number M2506016AY-C0127) with a Class B, Zone 2 (commercial and light industrial environment) scope, based on 47 CFR Part 15 Subpart B.

Durability documentation runs in parallel: LASPACK cash drawers have passed 1,000,000-cycle durability tests. Comparing that figure against the industry split between standard-duty (1 million cycles) and heavy-duty (4 million cycles or more) ratings is the cleanest way to check whether any supplier’s durability claim is documented or merely descriptive.

Frequently Asked Questions

Are the LAS-335, LAS-405, LAS-410G and LAS-410A covered by CE, RoHS and FCC certification?

Yes. LASPACK cash drawers hold CE certification under number M2506016AY-C0127 issued by MEiOU for the EEA/EU market, with a scope covering residential, commercial and light industrial environments and based on standards including EN 55032:2015+A1:2020, EN 55035:2017+A11:2020, EN IEC 61000-3-2:2019+A1:2021 and EN 61000-3-3:2013+A2:2021+AC:2023. RoHS certification is held under number M2506016AY-C0128, issued by MEiOU for the EU/EEA market under standard EN 62321. FCC certification is held under number M2506016AY-C0127, issued by MEiOU, with a Class B, Zone 2 (commercial and light industrial environment) scope based on 47 CFR Part 15 Subpart B. The LAS-335, LAS-405, LAS-410G, LAS-410A and LAS-4042 are all listed as applicable products, and all three certificates are valid from 2025-06-12 to 2030-06-12.

What actually separates the LAS-410G from the LAS-410A?

Both measure 410 (W) × 415 (L) × 100 (H) mm, both provide 5 bill compartments and 8 coin compartments, both use a steel panel, a three-position key lock and a 12V/24V RJ11/RJ12 receipt printer interface, and both are available in black, white or customized colours. The documented difference is weight: the LAS-410G has a net weight of 5.6 kg and a gross weight of 6.2 kg, while the LAS-410A has a net weight of 6.5 kg and a gross weight of 7 kg. A 0.9 kg difference at identical external dimensions points to different internal construction, so buyers should confirm the specific build with the supplier before selecting between them.

Do larger cash drawers cost more, and what drives the difference?

Size and weight both scale upward across this range — from 335 × 368 × 80 mm and 3.4 kg net on the LAS-335 to 410 × 415 × 100 mm and 6.5 kg net on the LAS-410A — and a larger body uses more metal and ships in a heavier carton, with gross weight rising from 3.8 kg to 7 kg across the four models. Because unit price depends on the exact configuration, colour and logo customization, order quantity and delivery terms, the accurate figure comes from a quotation rather than a published list price. LASPACK supports OEM/ODM customisation including voltage and logo, with a minimum order quantity of 100 pieces.

Can I test a specific drawer size before placing a bulk order?

Sampling is the recommended path, because fit is decided by a 20 mm height difference and a 70 mm width difference that cannot be judged from a drawing. LASPACK applies 100% testing in quality control, so the drawer you validate is built to the same standard as the production run, and the OEМ/ODM programme covers voltage and logo customization on top of the four standard size options described here.

What are the lead time and production capacity if I order the LAS-410 series?

LASPACK quotes a minimum order quantity of 100 pieces, a lead time of 10–15 days and a monthly production capacity of 40,000 pieces, supported by after-sales warranty, remote support and technical guidance. To confirm the right model against your counter drawing, request a sample or a quotation from LASPACK at lena@laspack.com, or send a message on WhatsApp at +852 98740600.

Conclusion: Match the Drawer to the Constraint, Not the Catalogue

Size is the one cash drawer specification that cannot be changed after purchase. In this comparison, the LAS-335 (335 × 368 × 80 mm, 3.4 kg, 4 bills / 3–5 coins) is the fit for shallow, space-constrained counters and secondary registers. The LAS-405 (405 × 420 × 100 mm, 4.5 kg, 5 bills / 6 coins) is the balanced mid-point beneath a standard printer shelf. The LAS-410G and LAS-410A (410 × 415 × 100 mm, 5 bills / 8 coins) deliver the highest coin capacity in the range, separated by net weight at 5.6 kg and 6.5 kg.

Whichever model you select, three checks should close the decision: confirm that the certificate numbers and validity dates cover the model and the destination market, confirm the internal build difference between the two 410 models with the supplier, and validate the fit with a physical sample before the bulk order is released.