{{ variable.name }}

This lattice transmission tower is a self-supporting angle steel structure engineered for one specific overhead line project. Tower type (suspension, tension, terminal or special), voltage class, geometry, member sizes and bolt arrangement come from the approved line design and shop drawings rather than from a fixed catalogue number.
Members are fabricated from hot-rolled Q235 or Q355 angle steel, CNC cut and drilled, then hot-dip galvanized. Engineering runs on PLS-TOWER models, and trial assembly or full-scale proof and ultimate load testing can be arranged when the specification calls for it.
| Product type | Angle steel lattice transmission tower, self-supporting |
|---|---|
| Tower configuration | Suspension, tension, terminal and special towers, per line design |
| Voltage class | As defined by the project line design |
| Steel grade | Hot-rolled Q235 / Q355 or equivalent, subject to design |
| Member form and connections | Hot-rolled angle members, bolted connections per approved shop drawings |
| Surface protection | Hot-dip galvanizing to ASTM A123 / A123M; ASTM A153 / A153M for hardware; EN ISO 1461 when specified |
| Design life | 30+ years; up to 50 years in coastal high-corrosion conditions |
| Design and detailing | PLS-TOWER modelling, shop drawings and member schedules |
| Fabrication | CNC cutting and drilling, trial assembly support, member and bolt traceability |
| Structural verification | Full-scale proof / ultimate load test to IEC 60652 and project utility specification (type test report dated 2024-08-06) |
| Management systems | ISO 9001:2015, ISO 14001:2015, ISO 45001 |
Four structural families are offered: suspension towers that carry conductor weight in line, tension towers that take longitudinal pull at angle points, terminal towers that terminate the line at substations, and special towers for crossings or non-standard geometry. Voltage class, body extension, crossarm arrangement and foundation interface are set line by line, so two projects rarely share the same drawing set.
The tower body is built from hot-rolled angle steel in Q235 or Q355 grades chosen by the design loads. Members are CNC cut and drilled, matched with galvanized bolts, and assembled in bolted connections that allow field erection without welding. Hot-dip galvanizing follows ASTM A123 / A123M, with ASTM A153 / A153M hardware coating and EN ISO 1461 when a project specification requires it. Galvanizing compliance is documented under certificate 2026102203 covering coating thickness, appearance and adhesion checks.
Each tower is quoted and built to project documents: line profile, load tree, wind and ice criteria, standard (IEC, utility specification or other nominated code), galvanizing standard, and any trial assembly or full-scale test requirement. Drawings, calculation reports, inspection plans and packing lists are prepared per contract. Please send approved drawings or design criteria for a technical review.
Operations are certified to ISO 9001:2015 (certificate 11426Q02825R201, valid to 2029-07-26), ISO 14001:2015 (98924E00237R0M, valid to 2027-11-26) and ISO 45001 (11426S01743R201, valid to 2029-07-26). Third-party inspection and certification through SGS (report YHGG-211115-4) and TUV can be arranged within the project inspection scope. The group has manufactured power steel structures since 1991 at a 40,000 m2 base with a dedicated PLS-POLE / PLS-TOWER engineering team, and 95% of output is supplied to overseas projects.
Yes. Member sizes, tower body configuration and bolting are fabricated to approved shop drawings, with PLS-TOWER modelling support where the design is developed with us.
Hot-dip galvanizing to ASTM A123 / A123M, hardware to ASTM A153 / A153M, and EN ISO 1461 when the project specification names it.
Proof and ultimate load tests can be performed to IEC 60652 and project utility specifications at an approved tower testing centre or client-approved laboratory, with a type test report issued for the tested design.
Member and bolt traceability is maintained against project documentation, which supports site erection checks and third-party inspection.
Yes. Trial assembly can be included where specified, so hole alignment and member fit are verified before packing.
Line profile and voltage class, tower type and quantity, load tree, wind and ice criteria, nominated design and galvanizing standards, testing requirements and delivery schedule.
Email: zjw@yin-he.com
WhatsApp: +86 130-1366-6666
Tel: +86-510-87841888
Address: No.1 Yinhe Road, Wanshi Town, Yixing, Jiangsu, China
lattice-transmission-tower-angle-steel-galvanized.png - Angle steel lattice transmission tower with hot-dip galvanized bolted memberslattice-transmission-tower-crossarm-detail.png - Crossarm and bolted connection detail of a lattice transmission tower