FCC certificate XH251203102986R1 for the 4-in-1 Grooming Kit Model JM-708, issued by Shenzhen Xuhang Detect Certification Co., Ltd. on 8 January 2026.

A grooming kit ODM project needs two separate electromagnetic compatibility approvals before the same product can be placed in the EU and the US, and a buyer should be able to verify both in under ten minutes. For the 4-in-1 Grooming Kit Model JM-708, both documents exist. CE-EMC certificate XH251203102985R1 cites EN IEC 55014-1:2021 and EN IEC 55014-2:2021 for the European Union market; FCC certificate XH251203102986R1 cites FCC Part 15 Subpart B and ANSI C63.4 for the United States market. Shenzhen Xuhang Detect Certification Co., Ltd. issued both on 8 January 2026.

This guide is written for brand owners, importers and procurement teams who receive a folder of certification PDFs and must decide whether the file is complete enough to release a purchase order. It sets out what each document proves, what it does not prove, and the specific checks that turn a stack of attachments into a defensible compliance record for an electric shaver or grooming kit programme.

Problem Definition: Why EMC Paperwork Fails an ODM Review

Compliance files rarely fail because a supplier has no certification. They fail because the document in hand cannot be tied to the product being bought. Five failure patterns account for most of the delays observed in grooming appliance sourcing.

1. Model mismatch. A certificate covers one model, while the purchase order names another. A nose hair trimmer certificate cannot stand in for a grooming kit certificate, and a grooming kit certificate cannot be used to claim conformity for an unrelated shaver body.
2. Standard edition drift. A file cites an older edition of a product-family standard than the one used in the current test programme, which raises a question the buyer then has to resolve with the supplier and the laboratory.
3. Wrong document category. An EMC document is presented as if it answered a safety question. Electromagnetic compatibility and electrical safety are assessed against different standards, and one document does not close the other.
4. Issuer and traceability gaps. The certificate number, the issuing body and the issue date are missing from the copy supplied, so the buyer cannot match the document to a test report or to a validation record.
5. Missing scope statement. The certificate does not clearly state which product and model it applies to, leaving the buyer unable to determine whether the shipped configuration was inside the tested scope.

Each of these is preventable at the quotation stage rather than at the port.

Industry Background: Two Markets, Two Separate EMC Regimes

European Union: CE-EMC Against the EN IEC 55014 Family

Electric shavers and grooming kits placed on the EU market are assessed for electromagnetic compatibility. The two product-family standards that appear on the JM-708 CE-EMC certificate are EN IEC 55014-1:2021, which addresses emission requirements, and EN IEC 55014-2:2021, which addresses immunity requirements for household appliances and similar apparatus. Both are cited on the same certificate, which is why an EU file should show the pair rather than a single standard.

The EU file for a grooming appliance normally also contains a hazardous-substance document. The JM-708 carries a separate RoHS certificate, XH251203102987R1, citing the IEC 62321 series: IEC 62321-3-1:2013, IEC 62321-4:2013+AMD1:2017, IEC 62321-5:2013, IEC 62321-6:2015, IEC 62321-7-1:2015, IEC 62321-7-2:2017 and IEC 62321-8:2017.

United States: FCC Part 15 Subpart B and ANSI C63.4

The US EMC requirement for this product category is framed under FCC Part 15 Subpart B, with ANSI C63.4 as the referenced measurement method. The JM-708 FCC certificate, XH251203102986R1, cites exactly that pairing. ANSI C63.4 is a measurement procedure standard, not a substitute for Part 15 Subpart B; a complete US file therefore names both, in the order in which they appear on the certificate.

Safety and RoHS Sit Beside EMC, Not Inside It

A CE-EMC certificate does not describe electrical safety performance. The relevant safety scope for this product family is identified in IEC 60335-2-8:2022, which covers electric shavers, hair clippers, epilators and similar appliances intended for household and similar purposes, rated at not more than 250 V, and which explicitly includes direct-current-supplied and battery-operated appliances. The 2022 edition replaces the sixth edition published in 2012 and its amendments. The same standard identifies IPX7 as the minimum rating for washable and wet-use shavers. Buyers who need a safety position should request it as a separate item and should not infer it from the EMC file.

Why Documentation Checks Have Become Routine

Cross-border supply in this category is large enough that paperwork quality is now part of supplier selection. China's exports of electric shavers under HS 851010 reached USD 359 million for January to August 2026, according to China General Administration of Customs statistics. Grand View Research projects the US electric shavers market at USD 4.94 billion by 2033, growing at a CAGR of 5.5% over 2025 to 2033. When the same model platform is shipped into both regions, a single missing document can block one market while the other ships normally.

Detailed Solution: The Document Set Behind a Certified Grooming Kit

A complete EMC file for an electric shaver or grooming kit ODM project has five layers. Missing any one of them weakens the other four.

• Certificate of conformity — the one-page document that names the model, the standards, the certificate number, the issuing body, the issue date and the validity date.
• Underlying test report — the measurement record the certificate summarises, including the tested configuration.
• Scope statement — the wording on the certificate that binds it to a specific product and model designation.
• Standard edition record — confirmation that the cited standard editions are the ones the current programme was tested against.
• Issuer traceability — a named, contactable certification body, so the buyer can verify rather than assume.

The JM-708 Certificate Record

Ningbo Jinmi Electrical Appliance Technology Co., Ltd. is a personal care appliance manufacturer based in Zhouxiang Town, Cixi City, Ningbo, Zhejiang, China, supplying electric shavers, hair clippers and nose hair trimmers into Europe, North America and Southeast Asia. Its 4-in-1 Grooming Kit, Model JM-708, combines an electric shaver, hair clipper, nose trimmer and eyebrow trimmer in one body. The following table reproduces the certificate data a buyer should expect to receive for that model.

All three documents state the same subject: multi-functional trimmer, Model JM-708. That repetition is the useful part. When the scope wording is identical across EMC, FCC and RoHS, the buyer can treat the three files as one coherent package for a single model rather than three unrelated attachments.

CE-EMC certificate XH251203102985R1, citing EN IEC 55014-1:2021 and EN IEC 55014-2:2021 for the EU market.

Companion Models Need Their Own Documents

Certification is model-specific, and a buyer assembling a multi-SKU programme should not assume coverage transfers between products. The Nose Hair Trimmer Model JM-701, for example, holds its own CE-RoHS certificate, XH251103102822, issued against IEC 62321-3-1:2013 for the EU market, and its own FCC certificate, XH251103102823, issued against FCC Part 15 Subpart B and ANSI C63.4 for the US market, both dated 17 November 2025. A project that bundles a grooming kit and a standalone trimmer therefore needs four documents, not two.

RoHS certificate XH251203102987R1 for the JM-708, issued against the IEC 62321 series for the EU market.

Step-by-Step Breakdown: A Seven-Step Verification Workflow

The workflow below can be run by a procurement team without a compliance specialist, and each step produces a written record that can be filed alongside the purchase order.

Step 1 — Fix the Model Designation First

Confirm the exact model designation in the purchase order and compare it, character for character, with the designation on the certificate. For JM-708 the certificate reads multi-functional trimmer, Model JM-708. A grooming kit sold under a different internal code still needs a documented link to the certified model.

Step 2 — Map Each Destination Market to a Document Type

The EU destination requires the CE-EMC document and, separately, the RoHS document. The US destination requires the FCC document. Two destinations mean two document sets, even when both ship from the same production line.

Step 3 — Read the Standards Line, Not Just the Certificate Title

Check that the standards named on the certificate match the editions the supplier states it tested against. On the JM-708 file the EU line reads EN IEC 55014-1:2021 and EN IEC 55014-2:2021, and the US line reads FCC Part 15 Subpart B and ANSI C63.4. If the year in the standard edition differs from what the supplier describes in the quotation, ask for an explanation before ordering.

Step 4 — Verify the Issuer and the Certificate Number

Record the issuing body and the certificate number in the sourcing file. For JM-708 both EMC documents were issued by Shenzhen Xuhang Detect Certification Co., Ltd., with numbers XH251203102985R1 for CE-EMC and XH251203102986R1 for FCC. A certificate without a named issuer and a retrievable number is not a usable document.

Step 5 — Confirm the Scope Statement Covers the Shipped Configuration

Read the scope wording and match it against what will actually be in the carton: shaver head, hair clipper head, nose trimmer head, eyebrow trimmer head, motor, battery and charging input. Where a project changes the electrical build, the existing certificate should be re-confirmed with the issuer before it is relied on for market entry.

Step 6 — Connect the Certificate to the Production Build

A certificate describes a tested configuration, not a production line. Ask for the process control that keeps units inside that configuration. Ningbo Jinmi applies 100% testing in production, and an inspection room record supports the quality gate behind the declaration.

Inspection room: the quality gate that keeps production units inside the certified configuration.

Step 7 — Archive by Market and Re-Check After Any Engineering Change

File the EU set and the US set separately, with issue and validity dates visible on the first page. Re-run steps 1 to 5 whenever the motor, battery, charging circuit or electronics change, because those are the elements an EMC assessment is built around.

Use Cases: Where This Check Decides a Project

Dual-Market Launch of a 4-in-1 Grooming Kit

A brand owner launching the same grooming kit in Germany and the United States needs the CE-EMC and the FCC document as a pair. Reviewing them together exposes whether the EU and US filings describe the same model configuration, which is the most common source of a late correction.

Private-Label Programme on an Existing Certified Platform

A retailer private-label project sits on top of an already certified model. OEM and ODM cooperation with logo and nameplate customization is supported, so the branding layer can change while the certified model designation remains the anchor for the compliance file.

Retail Chain or Hypermarket Onboarding

A chain store listing request typically arrives with a document checklist. A supplier that can produce model-specific certificates with numbers, issuer and dates on request shortens that review. Ningbo Jinmi has supplied personal care OEM programmes of 300,000 units over five years into hypermarket, gift set and brick-and-mortar chain channels.

Cross-Border E-Commerce Listings

Marketplace compliance reviews increasingly ask for the certificate rather than a statement that certification exists. A file organised by market, with the certificate number visible in the listing documentation, reduces the risk of a listing being paused mid-season.

Comparison Table: CE-EMC Versus FCC for Model JM-708

The practical reading of this table is simple: the two documents are parallel, not sequential. A supplier that holds one and not the other is ready for one market only, regardless of how complete the production capability looks.

Regional Compliance Checklist for Sourcing Decisions

Use the lists below as a release gate before confirming a purchase order. Each line corresponds to a verifiable item in the certificate file.

European Union File

• CE-EMC certificate present, number XH251203102985R1, scope reads multi-functional trimmer, Model JM-708
• Standards line reads EN IEC 55014-1:2021 and EN IEC 55014-2:2021
• Issuing body named as Shenzhen Xuhang Detect Certification Co., Ltd.
• Issue date 2026-01-08 and validity date 2099-01-08 visible on the document
• RoHS certificate XH251203102987R1 filed alongside the EMC document
• Safety position requested separately, not inferred from the EMC file

United States File

• FCC certificate present, number XH251203102986R1, same model scope
• Standards line reads FCC Part 15 Subpart B and ANSI C63.4
• Issuing body named and contactable
• Issue date and validity date recorded in the sourcing file
• No overlap assumed with the EU document set

Both Markets

• Model designation on each certificate matches the purchase order
• Shipped configuration matches the configuration described in the certificate scope
• Any engineering change to motor, battery, charging circuit or electronics reviewed with the issuer before shipment
• Certificates archived by market, with the number retrievable from the listing or technical file

Final assembly workshop: certified model configurations are assembled and 100% tested before shipment.

FAQ: CE-EMC and FCC Documentation for Electric Shaver ODM Projects

Conclusion

CE-EMC and FCC documentation answer two different questions for two different markets, and a grooming kit ODM project is only ready for a dual-market launch when both answers exist in writing. For Model JM-708, the record is complete and specific: CE-EMC certificate XH251203102985R1 against EN IEC 55014-1:2021 and EN IEC 55014-2:2021 for the EU, and FCC certificate XH251203102986R1 against FCC Part 15 Subpart B and ANSI C63.4 for the US, both issued by Shenzhen Xuhang Detect Certification Co., Ltd. on 8 January 2026, with the RoHS certificate XH251203102987R1 completing the EU set.

The verification work itself is short. Fix the model designation, map each market to its document, read the standards line rather than the cover page, record the issuer and certificate number, confirm the scope matches the shipped configuration, and re-check after any engineering change. That sequence is enough to separate a file that supports a purchase order from a folder of attachments that only looks like one.

Sample showroom: request a sample of the certified model before committing to a production run.