Toyota Replacement Parts: Camry 2015/2018 vs 2024 Headlamps

TYJ-01-0171 is engineered for the 2015 USA Camry and listed as compatible with 2018 USA, SE and XSE vehicles. Image: Gold Auto Part.

Two Camry headlamp assemblies from Gold Auto Part sit at two different points in the same nameplate's life cycle. TYJ-01-0171 is engineered for the 2015 USA Camry and is listed as compatible with 2018 USA, SE and XSE vehicles; TYJ-01-1001 is engineered for the 2024 USA Camry with precision mounting geometry. The useful answer for a distributor is that these are not two versions of one buying decision. They are two separate inventory decisions with different demand curves, different material logic and different freight math.

Ruian Golden Import and Export Co., Ltd., trading as Gold Auto Part, is an automotive parts exporter based in Ruian, Wenzhou, Zhejiang Province, China. The company supplies engine valves, automotive filters and Toyota exterior parts — headlamp assemblies, bumpers and grilles — to importers, wholesalers and distributors, and lists the USA as its export market.

Why These Two Camry Headlamps Are Separate Inventory Decisions

A distributor rarely buys a headlamp for a single car. They buy coverage for a repair market — a mix of model years that collision shops, fleet workshops and rebuilders bring in every week. That mix decides whether a SKU earns its shelf space.

The Camry creates an unusually wide spread. A 2015 Camry and a 2018 Camry can often be served by one assembly because TYJ-01-0171 is designed for the 2015 USA vehicle and listed as compatible with 2018 USA, SE and XSE specifications. A 2024 Camry belongs to a different generation with different mounting geometry, which is why TYJ-01-1001 is engineered separately for the 2024 USA vehicle rather than adapted from the earlier design.

The failure modes are symmetric. Stock only the older SKU and 2024 repair work is turned away or sourced from a slower channel. Stock only the 2024 SKU and the far larger population of older Camrys in the repair cycle is unserved. Carry both without a model-year map and capital sits in the wrong carton size, in the wrong quantity, at the wrong time.

Three variables resolve the question: how much model-year coverage one SKU delivers, what each assembly's lens and body materials are built to resist, and how the packaging converts into freight and warehouse cost.

Industry Background: Why Both Camry Generations Stay in Demand

Headlamp demand follows the vehicle parc, and the U.S. parc is aging. The average age of vehicles on U.S. roads reached 12.6 years in 2026, according to Business Research Insights — a figure that keeps 2015 and 2018 model years firmly inside the collision and repair cycle rather than fading out of it.

Brand volume supports the parts pull-through. Toyota held an 11.4% share of the global automotive market in 2026, according to Toyota Market Trends 2026, which keeps Camry assemblies — and adjacent Toyota Body Parts such as bumpers and grilles — in steady rotation for aftermarket suppliers.

The demand pool itself is large. Grand View Research valued the global automotive collision repair market, the segment that drives bumper and lamp replacement, at USD 208.0 billion in 2025. Total aftermarket sizing varies by methodology: one 2025 estimate puts the global automotive aftermarket at USD 860.08 billion (Vertex AI Search / Market Analysis), while Grand View Research's narrower scope gives USD 489.5 billion. The direction is consistent even where the totals are not.

Supply flows through China. China's exports of motor vehicle parts (HS 870899) reached approximately USD 10.9 billion in 2024 according to UN Comtrade / WITS, with USD 11.54 billion of motor vehicle parts exported to the United States in the same year. That is the channel most importers use for Toyota Aftermarket Parts programmes.

The Two SKUs in Detail

TYJ-01-0171 — Engineered for the 2015 USA Camry, Compatible With 2018 USA / SE / XSE

TYJ-01-0171 is a Toyota Headlamp Assembly designed for the 2015 USA Camry. Its commercial value lies in coverage: the same assembly is listed as compatible with 2018 USA, SE and XSE vehicles, so one SKU answers two model years and multiple trims instead of forcing a distributor to split stock across near-identical parts.

The lens is specified as UV-resistant polycarbonate (PC). That matters for markets with sustained sun exposure, where lens clarity and surface condition are part of how the repair is judged by the end customer. Packaging runs at 4 units per carton, occupying 0.232 cbm.

TYJ-01-1001 — Engineered for the 2024 USA Camry With Precision Mounting Geometry

TYJ-01-1001 is designed for the 2024 USA Camry. The defining feature is precision mounting geometry: the assembly is engineered to the mounting and alignment requirements of that generation, not to the earlier body shell. For a distributor, that means the part is validated against a different installation reality and cannot be substituted into 2015–2018 work.

The body is specified as thermal-resistant, which addresses the heat load that lamp housings absorb in service. Packaging runs at 2 units per carton, occupying 0.112 cbm.

TYJ-01-1001 is engineered for the 2024 USA Camry with precision mounting geometry and a thermal-resistant body. Image: Gold Auto Part.

Decision Factor 1 — Fitment Coverage vs Fitment Depth

TYJ-01-0171 wins on coverage. One SKU spans a designed target of 2015 USA plus 2018 USA, SE and XSE compatibility, which lowers the number of part numbers a distributor must carry to serve a mixed older fleet. Coverage reduces stock-keeping complexity and improves the odds that a walk-in repair is filled from the shelf.

TYJ-01-1001 wins on depth. It targets a single, newer generation with precision mounting geometry, so it serves 2024 repair demand without compromise. Depth does not reduce inventory risk on its own — it concentrates it on one model year, which is why volume planning matters more for this SKU.

Decision Factor 2 — Lens and Body Material Logic

The two SKUs are not specified around the same material priority. TYJ-01-0171 is built around a UV-resistant PC lens, a specification aimed at surface durability under prolonged sunlight. TYJ-01-1001 is built around a thermal-resistant body, a specification aimed at heat behaviour in the housing assembly.

For buyers, this is a climate-and-duty question. Markets and applications where solar exposure dominates the service environment point toward the UV-resistant lens specification. Applications where heat load inside the lamp assembly is the dominant stress point an obvious consideration toward the thermal-resistant body specification. Neither attribute is a claim of general superiority — each addresses a different degradation path.

Decision Factor 3 — Packaging and Freight Math

Packaging decides how much of the purchase price is freight and how much warehouse space a SKU consumes. TYJ-01-0171 ships at 4 units per carton, 0.232 cbm per carton. TYJ-01-1001 ships at 2 units per carton, 0.112 cbm per carton.

Converted to a per-unit basis — calculated from the carton figures — TYJ-01-0171 occupies approximately 0.058 cbm per unit and TYJ-01-1001 approximately 0.056 cbm per unit. The two are effectively comparable in volume efficiency per piece. The operational difference is carton granularity: a 4-unit carton lets a distributor break a mixed order into smaller per-model quantities for the older Camry range, while the 2-unit carton suits tighter, higher-value allocations of the 2024 SKU.

Step-by-Step: Prioritizing the Right Camry Headlamp SKU for Your Market

The following sequence converts a local repair market into a defensible SKU order. It is a planning method, not a pricing formula.

Step 1 — Map the local Camry model-year mix. Pull the model-year distribution from your own sales history, your top collision-shop accounts or your repair-network customers. The ratio of 2015–2018 vehicles to 2024 vehicles is the single largest determinant of the split between the two SKUs.

Step 2 — Confirm trim-level fitment before you commit. The 2015/2018 SKU is listed as compatible with 2018 USA, SE and XSE. Check that the trims your market actually repairs sit inside that compatibility list, and treat any trim outside it as a separate question rather than an assumption.

Step 3 — Match the material specification to the service climate. Where sustained UV exposure is the dominant stress, the UV-resistant PC lens specification of TYJ-01-0171 is the relevant reference. Where heat load inside the housing matters more, the thermal-resistant body of TYJ-01-1001 is the relevant reference. Record the reasoning — it makes the next buying cycle faster.

Step 4 — Convert cartons into freight and storage cost. Multiply planned units by the per-unit volume derived from each carton: approximately 0.058 cbm per unit for TYJ-01-0171 and 0.056 cbm per unit for TYJ-01-1001. Then compare that against warehouse slot cost and the smallest sellable increment your customers actually order.

Step 5 — Validate on a sample before the first bulk release. Sample water immersion testing for water-sealing validation and a physical bracket fitment check are the documented acceptance criteria for this category. Both are cheap to run and expensive to skip.

Step 6 — Lock quantity, terms and lead time. The documented MOQ range is 50 to 100 units per model, standard delivery time is 30 to 60 days, and monthly production capacity is 100,000 units. Align the first purchase order with those parameters rather than with an assumed instant-shipment model.

Monthly production capacity is 100,000 units with inspection and testing before shipment. Image: Gold Auto Part.

Use Cases: Which Buyer Should Lead With Which SKU

U.S. distributor serving an older Camry repair base. Where the local parc skews toward 2015–2018 vehicles, TYJ-01-0171 should carry the inventory weight. One SKU covers the designed 2015 target plus 2018 USA, SE and XSE compatibility, which reduces part-number count and improves shelf fill rates for walk-in collision work.

Distributor adding 2024 model-year coverage. TYJ-01-1001 belongs in the range as a dedicated 2024 USA SKU with precision mounting geometry. It should be planned as a focused, higher-value line rather than a broad-coverage one, because its demand is concentrated in a single generation.

Importer serving high-sunlight markets. Buyers who resell into markets where lens surface condition drives customer acceptance have a clear reason to specify the UV-resistant PC lens assembly. The same logic applies to any programme where vehicles sit outdoors for most of their service life.

Buyer building a combined Toyota body-parts programme. Camry headlamps rarely travel alone. Distributors often bundle them with Toyota Bumper, Toyota Grille and other Toyota Body Parts lines. Gold Auto Part's model supports that: production services include OEM, ODM and customization options, and customization covers vehicle-model adaptation, appearance customization, packaging and label customization, and replacement part solution development. The same sourcing logic transfers to adjacent lines such as a Toyota RAV4 Headlamp Assembly programme or filter and engine valve categories.

Comparison Table: TYJ-01-0171 vs TYJ-01-1001

Manufacturing, Capacity and Quality Facts Behind the SKU Programme

A two-SKU headlamp programme only works if the supplier can repeat it. Ruian Golden Import and Export Co., Ltd. provides OEM, ODM and customizable production services, with a monthly production capacity of 100,000 units and a standard delivery time of 30 to 60 days.

Quality control is stated as inspection and testing before shipment, and supply-chain partners operate under ISO 9001 and IATF 16949 quality management standards. IATF 16949:2016 is the global quality management standard for the automotive industry and is mandatory for many OEM suppliers, according to the International Automotive Task Force.

After-sales support covers part selection, order assistance and after-sales service. For a distributor, that combination — documented capacity, a defined inspection step and a named support route — is what makes a two-SKU portfolio plannable rather than speculative.

Frequently Asked Questions

How do I confirm that TYJ-01-0171 fits a 2018 Camry as well as a 2015 Camry?

TYJ-01-0171 is designed for the 2015 USA Camry and is listed as compatible with 2018 USA, SE and XSE vehicles, so one SKU can serve both model years. Confirmation should combine the model-year and trim reference with a physical check of the bracket, clip slots and mounting points before the order is released. Gold Auto Part carries out inspection and testing before shipment, and buyers can align the acceptance criteria with a bracket fitment check on a sample.

Can Gold Auto Part support OEM Toyota replacement parts programmes for bumper and grille lines?

Yes. Ruian Golden Import and Export Co., Ltd. provides OEM, ODM and customizable production services. Customization covers vehicle-model adaptation, appearance customization, packaging and label customization, and replacement part solution development, and the factory has a monthly production capacity of 100,000 units. That structure allows a distributor to run Camry headlamp SKUs alongside Toyota bumper, grille and other Toyota body parts programmes under one supply relationship.

What MOQ, payment and freight terms apply to Camry headlamp orders?

The documented MOQ range is 50 to 100 units per model. Purchasing terms include a 30% TT deposit, with the balance settled before shipment or against shipping documents depending on the SKU and order structure, and delivery is quoted FOB Shanghai or Ningbo, or EXW factory. Exact terms are confirmed per SKU at quotation.

Can a distributor validate fitment and water sealing before a bulk order?

Yes. Sample water immersion testing for water-sealing validation and a physical bracket fitment check are the documented acceptance criteria for these body and lamp categories, supported by inspection and testing before shipment. Validating both points on a sample reduces the risk of a container-level order arriving with fitment complaints.

What lead time and capacity should be planned for a two-SKU Camry headlamp programme?

Standard delivery time is 30 to 60 days with a monthly production capacity of 100,000 units. Freight planning should use the carton data: TYJ-01-0171 packs 4 units per carton at 0.232 cbm, while TYJ-01-1001 packs 2 units per carton at 0.112 cbm. Buyers can send their model-year mix to mia@goldautopart.com to receive a SKU-level quote and a sample plan before placing a first order.

Conclusion

TYJ-01-0171 and TYJ-01-1001 are not competing options for the same purchase. TYJ-01-0171 is the coverage SKU: designed for the 2015 USA Camry, compatible with 2018 USA, SE and XSE, specified with a UV-resistant PC lens and packed 4 units per 0.232 cbm carton. TYJ-01-1001 is the depth SKU: designed for the 2024 USA Camry with precision mounting geometry, specified with a thermal-resistant body and packed 2 units per 0.112 cbm carton.

The correct priority follows your local model-year mix, your service climate and your freight structure — in that order. Distributors whose repair base is dominated by 2015–2018 vehicles should anchor on TYJ-01-0171 and add the 2024 SKU as coverage grows. Distributors whose customers are already working on 2024 vehicles should build the programme the other way around, with TYJ-01-1001 as the lead line and the older SKU as the volume base.

Gold Auto Part supplies Toyota headlamp assemblies, bumpers, grilles and other Toyota replacement parts to importers and distributors.