Phthalates, Sebacates, Citrates & Butyl Stearate Guide

Phthalates, Sebacates, Citrates, and Butyl Stearate: A Buyer's Guide to Additive Categories
Additive buying becomes risky when a price list mixes chemical families under one commercial category. A buyer may see phthalates, sebacates, citrates, an adipate, an epoxidized soybean oil, a glycol ester, and Butyl Stearate in the same folder and assume they are interchangeable because all are liquids or all are called esters. They are not. This guide maps the additive landscape around Butyl Stearate by grouping the supplied products into recognizable categories: phthalates (DBP, DOP, DPHP, DINP), non-phthalate DOTP, sebacates (DBS, DOS), the adipate DOA, citrates (TEC, TBC, ATBC), ESO, 3G8, and N-Butyl Stearate. It explains plasticizer versus lubricant versus other additive roles, shows where Butyl Stearate fits, and closes with the procurement question that matters: what purchasing terms and acceptance criteria should be written before a sample becomes a purchase order.
Where a specification value is supplied in the product data, this guide uses it as an example of the kind of limit a buyer can discuss with a supplier. Where no value is supplied, the article does not invent one. The purpose is not to rank these products against each other. The purpose is to help a buyer ask better questions before the first trial and before the first commercial order.
Problem definition: the category label is not the specification
The first risk is a functional mismatch. A buyer who needs a plasticizer may receive a quote for a lubricant, or a buyer who needs a processing aid may compare it against a plasticizer on price alone. The second risk is an identity mismatch. Phthalates are a family, not one product. Sebacates are a family, not one product. Citrates are a family, not one product. Even within one family, the exact substance, grade, and lot specification can change the purchasing decision.
The third risk is commercial. A supplier may quote a generic name, a trade name, or a shortened product label while the purchase order needs the exact chemical identity, CAS number, grade, packaging, and acceptance test. If the product name on the quotation does not match the product name on the TDS, SDS, and COA, the buyer has a document-control problem before the material even arrives. A practical category map reduces that risk because it forces the buyer to separate four questions: what function is required, which chemical family can serve it, which exact product and grade is being offered, and which acceptance criteria will prove that the delivered lot is the material that was approved.
Industry background: one supplier range can contain several additive families
The company profile describes Shandong Kexing Chemical Co., Ltd. as a manufacturer of plasticizers, plastic and rubber flame retardants, and plastic additives, based in Dongying, Shandong. Its listed range includes ATBC, TBC, TEC, DOA, DOS, DBS, N-Butyl Stearate, ESO, 3G8, DOTP, DINP, DPHP, DOP, and DBP. That breadth is useful because it allows a buyer to discuss several additive families with one supply channel. It also creates a buying problem: the same sales channel may quote products that serve different functions, sit in different regulatory categories, and require different acceptance tests.
The supplied application data lists toys, PVC products, plastics, leather, ink, and food packaging among the industries for the product family. That is a broad application frame, not a guarantee that every product in the range is suitable for every listed industry. For a buyer, the application list is a prompt to ask the next question: which exact product, grade, regulatory status, and test evidence apply to my formulation, my process, and my destination market? The category map below is organized around that question.
Plasticizer, lubricant, and other additive roles: a practical distinction
Plasticizer versus lubricant is the first distinction to lock. A plasticizer is added to a polymer formulation to change flexibility, softness, or processing behavior. A lubricant is added to reduce friction or improve flow and release during processing. A processing aid or mold-release agent may overlap with lubrication, but the purchasing evidence is still application-specific. In practice, the buyer should define the function in the formulation, the polymer or compound, the process step, and the acceptance test before comparing products.
Category names are not enough. A citrate ester, a sebacate, a phthalate, and a stearate may all be described as ester products, but they are not the same purchasing decision. The same logic applies to terms such as PVC internal lubricant, low volatility lubricant, mold release agent, rubber processing aid, cosmetic emollient, textile softening agent, or ink slip agent. These are application claims to verify, not synonyms for a chemical family. A supplier may use them in a product description, but the buyer should ask for the test method, the recommended dose basis, the compatibility data, and the regulatory evidence that support the claim in the intended use.
Other additive roles also change the buying file. ESO is supplied with an epoxy value specification, which is a different acceptance parameter from ester content. 3G8 is supplied with volatility and flash point data. A phthalate may be evaluated on ester content, density, acidity, moisture, color, and flash point. These differences mean that one generic certificate cannot cover the whole range. The purchase specification must match the product family and the application.
Category-by-category map
Phthalates: DBP, DOP, DPHP, and DINP
Phthalates are a family, not one product. The supplied range lists DBP, DOP, DPHP, and DINP. Their identities are distinct: DBP CAS 84-74-2, DOP CAS 117-84-0, DPHP CAS 84-77-5, and DINP CAS 28553-12-0. The supplied specifications also differ. DBP data lists ester content minimum 99.5%, density 1.044 to 1.048 g/cm³ at 20°C, acidity maximum 0.10 mg KOH/g, moisture maximum 0.10%, and flash point minimum 160°C. DOP data lists ester content minimum 99.5%, density 0.983 to 0.985 g/cm³, acidity maximum 0.1 mg KOH/g, moisture maximum 0.1%, and flash point minimum 195°C. DPHP data lists ester content at least 99.54%, density 0.960 g/cm³, flash point at least 210°C, acid value no more than 0.021 mg KOH/g, and moisture no more than 0.023%. DINP data lists ester content at least 99.52%, density 0.975 g/cm³, flash point at least 220°C, moisture no more than 0.036%, and acid value no more than 0.039 mg KOH/g.
For a buyer, these are not interchangeable merely because they are phthalates. The purchasing file should name the exact phthalate, the grade, the regulatory status required for the destination market and application, and the test methods used for each limit. A supplier statement that a product is a phthalate does not answer the regulatory question, the compatibility question, or the lot acceptance question.

Non-phthalate DOTP
DOTP is listed separately as a non-phthalate option. The supplied DOTP data lists CAS 6422-89-2, purity at least 99.68%, density 0.9824 g/cm³ at 20°C, flash point at least 214°C, moisture no more than 0.03%, and acidity 0.02. That separate listing matters. A buyer should not treat DOTP as a drop-in equal to DOP, DINP, or DPHP without defining the formulation test and the acceptance criteria. The correct comparison is on the same application, the same process conditions, and the same regulatory screen, not on the category name alone.
Sebacates: DBS and DOS
Sebacates in the supplied range are DBS and DOS. DBS is listed with CAS 109-43-3 and DOS with CAS 2432-87-3. The DOS specification lists ester content minimum 99.0%, density 0.913 to 0.916 g/cm³ at 20°C, acidity maximum 0.10 mg KOH/g, moisture maximum 0.1%, and flash point minimum 205°C. Buyers often evaluate sebacate esters where low-temperature flexibility or a specific durability requirement is part of the application brief. That is a reason to test, not a guarantee. The purchase specification should state the low-temperature test method, the target result, and the allowed change in other properties. Without those limits, a low-temperature description is only a claim.

Adipate: DOA
DOA is listed as the adipate in the range, with CAS 123-79-5. This guide does not assign a performance ranking to DOA because the supplied data does not provide a comparable application test against the sebacates or phthalates. For procurement, DOA should be placed in the same test matrix as the other plasticizer candidates: same polymer, same dose basis, same processing conditions, and same acceptance tests. If a supplier claims a specific advantage, ask for the test method and the actual data behind it.
Citrates: TEC, TBC, and ATBC
Citrates in the supplied range are TEC, TBC, and ATBC. TEC is listed with CAS 77-93-0; supplied data includes purity minimum 99.0%, density 1.135 to 1.139 g/cm³ at 20°C, moisture maximum 0.25%, acidity maximum 0.1 mg KOH/g, and flash point minimum 155°C. TBC is listed with CAS 77-94-1; supplied data includes ester content minimum 99.0%, density 1.037 to 1.047 g/cm³, moisture maximum 0.1%, acidity maximum 0.1 mg KOH/g, and flash point minimum 185°C. ATBC is listed with CAS 77-90-7. The buyer should not collapse the three citrates into one line item. They have different identities and, where supplied, different specification values. Regulatory status, odor, color, and compatibility should be checked for the exact citrate grade and the exact end use.

ESO and 3G8: specialty products in the same list
ESO and 3G8 are specialty products in the same list, but they are not phthalates, sebacates, or citrates. ESO is epoxidized soybean oil, CAS 8013-07-8. The supplied data lists an epoxy value minimum 6.0%, density 0.985 to 0.995 g/cm³ at 20°C, acidity maximum 0.5 mg KOH/g, and flash point minimum 280°C. Because an epoxy value is part of the supplied specification, the purchase order should state the epoxy value limit and the test method, not only the product name. 3G8 is triethylene glycol di-2-ethylhexoate, CAS 94-28-0. The supplied data lists flash point minimum 207°C and volatility maximum 0.4% after 2 hours at 125°C. Those parameters show why a buyer should ask for the full TDS: two products in the same catalog can require completely different acceptance tests.

Where Butyl Stearate fits
Among the listed materials, Butyl Stearate is the stearate ester. It is not a phthalate, sebacate, adipate, or citrate. The verified identity record describes Butyl Stearate as butyl octadecanoate, the butyl ester of stearic acid, with CAS 123-95-5, EC 204-666-5, and molecular formula C22H44O2. The supplied product list uses the name N-Butyl Stearate. For procurement, the first question is functional: is the buyer seeking a plasticizer, a lubricant or processing aid, a mold-release aid, or another additive function? The category name stearate does not answer that question.
The buyer should require a TDS, SDS, COA, and application-specific trial data before treating Butyl Stearate as a drop-in replacement for a plasticizer or for another lubricant. Regulatory screening should use CAS 123-95-5 and EC 204-666-5. The US FDA inventory lists Butyl Stearate in the food-contact substance inventory under 21 CFR parts 175 to 178; that is a screening point, not blanket approval for every formulation or market. ECHA's registration dossier record lists the substance identity; it does not by itself prove that a particular supplier's grade or import is covered. The practical answer is to separate identity, grade, function, and regulatory scope in the supplier file.
Comparison table: category map for procurement
The table below uses only supplied product names, CAS numbers, and specification anchors. It does not rank products or claim equivalence. Values are examples from the supplied product data; set lot acceptance limits in the purchase specification.
| Category | Products in the supplied range | Supplied identity or specification anchor | Buyer question before purchase |
|---|---|---|---|
| Phthalates | DBP, DOP, DPHP, DINP | CAS 84-74-2; CAS 117-84-0; CAS 84-77-5; CAS 28553-12-0. Supplied ester or purity values range from minimum 99.5% for DBP and DOP to at least 99.52% for DINP and at least 99.54% for DPHP. | Which exact phthalate, if any, is permitted for the application and destination market, and which regulatory and customer-specific limits apply? |
| Non-phthalate DOTP | DOTP | CAS 6422-89-2; purity at least 99.68%; flash point at least 214°C; density 0.9824 g/cm³. | Is DOTP being evaluated as a separate plasticizer, not as a drop-in equal to DOP or DINP, and what application tests will confirm it? |
| Sebacates | DBS, DOS | DBS CAS 109-43-3; DOS CAS 2432-87-3; DOS ester content minimum 99.0%, density 0.913 to 0.916 g/cm³, flash point minimum 205°C. | Which low-temperature or durability requirement drives the sebacate shortlist, and what test method will confirm it? |
| Adipate | DOA | CAS 123-79-5. | Is DOA being compared on the same application test and specification basis as the sebacates and phthalates? |
| Citrates | TEC, TBC, ATBC | TEC CAS 77-93-0, purity minimum 99.0%; TBC CAS 77-94-1, ester content minimum 99.0%; ATBC CAS 77-90-7. | Which citrate grade matches the regulatory, odor, color, and compatibility requirements? |
| ESO | ESO | CAS 8013-07-8; epoxy value minimum 6.0%; flash point minimum 280°C. | Is ESO being purchased for its epoxy value, plasticizer function, or both, and what limit applies? |
| 3G8 | 3G8 | CAS 94-28-0; flash point minimum 207°C; volatility maximum 0.4% after 2 hours at 125°C. | Does the application require this specific glycol ester, and what volatility or compatibility limit must be verified? |
| Butyl Stearate | N-Butyl Stearate | Butyl Stearate CAS 123-95-5; EC 204-666-5; formula C22H44O2. The product list uses N-Butyl Stearate. | Is the required function a lubricant or processing aid, a mold-release aid, or a plasticizer, and what grade and acceptance criteria are specified? |
Step-by-step procurement and acceptance criteria
A category map only helps if it becomes a purchasing process. The following steps keep the comparison honest and make the supplier quotation easier to audit.
- Define the function before the chemistry. State whether the material is intended as a plasticizer, a lubricant, a processing aid, a mold-release aid, or another additive role. Include the polymer or compound, the process step, the dose basis, and the performance test. A buyer who cannot state the function will usually compare unrelated products on price.
- Lock the exact product identity. Use the full product name and CAS number. For Butyl Stearate, use CAS 123-95-5 and EC 204-666-5 for screening. For the phthalates, sebacates, citrates, DOTP, ESO, and 3G8, use the CAS numbers in the table. Do not accept a shortened name if the purchase order, SDS, and COA will use different names.
- Request the document set. Ask for the TDS, SDS, and a lot-specific COA. For food-contact, cosmetic, or other regulated applications, ask for the specific regulatory evidence that applies to the exact grade and destination market. A general certificate for the company is not the same as a product-specific compliance document.
- Compare on the same basis. Put all candidates into one test matrix: same polymer, same dose, same processing conditions, and same acceptance tests. Do not compare a phthalate result from one process with a citrate result from another process and call it a category comparison.
- Set acceptance criteria from the supplied parameters. Use the parameters that matter for the product family: appearance, color, ester content or purity, density, acidity, moisture, flash point, volatility, and epoxy value where applicable. The supplied data shows these parameters because they are part of the product identity and quality discussion. The purchase specification should state the test method and the allowed range for each parameter.
- Separate identity from performance. A COA can confirm that a lot matches a specification. It cannot prove that the product is suitable for a new application. Keep the sample trial, the application test, and the commercial approval as separate gates.
- Write the commercial terms around the specification. Ask the supplier to state packaging, quantity basis, MOQ, lead time, delivery terms, and the COA arrangement for each lot. If the supplier cannot state these terms in writing, the buyer has a supply risk that a low quotation price does not solve.
- Control change. Ask how the supplier will notify you of a change in raw material source, process, specification, or packaging. A change-control clause is especially important when the product is part of a regulated application or a customer-approved formulation.
Use cases: how the category changes the buying question
The supplied application data lists toys, PVC products, plastics, leather, ink, and food packaging. The category changes the buying question in each case. In PVC products, the buyer must decide whether the material is being used as a plasticizer or as a lubricant or processing aid. That is why Butyl Stearate should not be placed in a plasticizer comparison by default; its functional role must be defined first. In toys and food packaging, the regulatory question is more demanding than the generic product name. The buyer should ask for the specific grade, the destination-market status, and the food-contact or toy-safety evidence that applies to the exact product.
In leather and ink, color, odor, volatility, and compatibility may matter as much as the main ester content. A product described as an ink slip agent or a textile softening agent should be supported by application data, not only by a catalog phrase. In rubber processing, a processing aid claim should be tied to a process step and a test result. In cosmetics, a cosmetic grade claim should be supported by the appropriate safety and regulatory documentation for the exact grade. The same rule applies to metal stamping lubricant, wax modifier, polyolefin flow modifier, and other application descriptions: the phrase is a starting point for verification, not the verification itself.
FAQ: Butyl Stearate suppliers
How should a buyer evaluate Butyl Stearate suppliers? Start with a documented supplier qualification, not a price list. Ask for the legal entity name, manufacturing site, product grade, CAS 123-95-5 and EC 204-666-5 on the SDS and COA, TDS limits for the parameters you will accept, a lot-specific COA, packaging, MOQ, lead time, and change-control notice. If food-contact, cosmetic, or PVC lubricant use is intended, ask for the specific regulatory and application evidence rather than relying on a general certificate. A practical next step is to request a sample and a quotation against your written acceptance criteria, then compare the returned COA with the TDS before commercial approval. Shandong Kexing Chemical Co., Ltd. lists N-Butyl Stearate in its range and provides a public brochure; a supplier listing is a starting point, not a qualification by itself.
Conclusion: buy the function, not the label
The additive list around Butyl Stearate is easier to manage when it is read as a category map. Phthalates are a family with distinct products and specifications. DOTP is a separate non-phthalate option. Sebacates, the adipate DOA, citrates, ESO, and 3G8 each bring their own identity and acceptance parameters. Butyl Stearate sits in the stearate ester discussion, and its fit depends on whether the buyer needs a lubricant or processing aid, a mold-release aid, or another function. The buying file should therefore connect four items: the function, the exact product identity, the application evidence, and the acceptance criteria.
Before the first order, ask the procurement question directly: what purchasing terms and acceptance criteria will prove that the delivered lot is the approved material? Use the TDS and COA to define the limits, use a sample trial to test the application, and use a written specification to control the commercial relationship. For a downloadable overview of the product range, access the product brochure.

Have Questions or Need More Details?
Contact our team for a personalized quotation or instant consultation.
Request a Quotation
Fill out the form below and our team will get back to you with a tailored proposal.
WhatsApp Direct Chat
Prefer to chat in real-time? Message us on WhatsApp for instant assistance & quick answers.
- Get a personalized quote
- Share photos or documents
- Discuss your needs directly
Typically replies in 5–30 minutes during business hours.