{{ variable.name }}
Thirteen SLTL-S models supply 2.06-59.78 m³/min at 3-5 bar for plants whose process air never needed 7-10 bar in the first place.

SLTL-S single stage low-pressure screw air compressor, 3-5 bar, 22-220 kW.
The SLTL-S series is a single stage low-pressure screw air compressor built for continuous duty at 3-5 bar. Thirteen models span 22-220 kW (30-294 hp), delivering 2.06-59.78 m³/min through DN50 to DN200 air outlets, with net weights from 1330 kg to 8000 kg. A low-pressure airend, an IP54 permanent magnet synchronous motor, a VFD-controlled centrifugal fan and three oversized filter elements make the series an option for wastewater aeration, glass and ceramics, cement and powder handling, and chemical processing.
A 5:6 asymmetrical rotor tooth profile with a large rotor, large bearing, low speed layout, measured on a three-coordinate measuring machine. Result: lower noise and vibration, longer airend life.
IP54 protection stays reliable in dusty, humid plant rooms. Motor temperature rise is held below 60 K, and ceramic-plated bearings remove shaft-current damage.
Centrifugal fans give higher air pressure and lower noise than axial fans. Frequency control holds oil temperature constant, extends lubricant life and resists cooler and filter clogging.
Air filter area exceeds 150% of normal requirement with low inlet pressure loss; oil filter rated capacity is at least 3x the circulating oil volume; glass-fibre oil separator keeps pressure loss low.
One continuous capacity band from 2.06 to 59.78 m³/min lets aeration, conveying and purging lines share a single low-pressure air source.
| Compressor type | Single stage low-pressure screw air compressor |
|---|---|
| Model series | SLTL-22S to SLTL-220S (13 models) |
| Working pressure | 3-5 bar |
| Capacity | 2.06-59.78 m³/min |
| Power | 22-220 kW |
| Horsepower | 30-294 hp |
| Noise | 62-77 ±3 dB |
| Air outlet diameter | DN50, DN65, DN80, DN125, DN150, DN200 |
| Net weight | 1330-8000 kg |
| Motor | Permanent magnet synchronous, IP54, temperature rise under 60 K |
| Material | Cast iron, stainless steel |
SLTL-22S · SLTL-30S · SLTL-37S · SLTL-45S · SLTL-55S · SLTL-75S · SLTL-90S · SLTL-110S · SLTL-132S · SLTL-160S · SLTL-185S · SLTL-200S · SLTL-220S
Single stage low-pressure units are aimed at processes that consume large air volumes at low pressure: wastewater treatment aeration, glass and ceramics manufacturing, cement and powder handling, and chemical production. In wastewater aeration duty, our scenario data positions single stage low-pressure screw compressors as offering energy savings of up to 50% compared with conventional compressors.

Low-pressure screw compressor package in production at the Shanghai Sollant plant.
Sollant operates a 30,000 m² factory with roughly four production lines, a capacity of 20,000 units per year (about 600 units per month), 150 employees and 20 engineers, including an in-house technical design department and an engineering R&D laboratory. Full OEM and ODM customization is supported, and units are exported to more than 100 countries, with 80% of output going to export markets.
A 90 kW low-pressure air compressor was supplied to a Mexican chemical producer in 2017 and has remained in stable, continuous service for more than eight years. It feeds pneumatic conveying of powdered and granular raw materials, supplies low-pressure sterile air to fermentation tanks and reactors for aeration and mixing, and handles low-pressure purging of storage tanks, pipelines and filtration equipment.
Reported results: constant low-pressure output matches the process without the energy waste of reducing pressure from a conventional high-pressure compressor; the unit runs 24/7 in high-temperature, high-humidity and potentially corrosive conditions with an extremely low failure rate; stable air pressure supports uniform fermentation and conveying; and lower-load operation extends component life and reduces maintenance cost.
3-5 bar working pressure across 22-220 kW (30-294 hp), with capacity from 2.06 to 59.78 m³/min and net weight from 1330 to 8000 kg.
Model selection follows your required m³/min at the working pressure plus duty cycle. Send the duty point and our engineers will confirm the model from the 13-model range.
The permanent magnet synchronous motor is rated IP54, so it is more stable and reliable than IP23 in harsh environments. Motor temperature rise stays under 60 K and bearings are ceramic-plated.
Three elements: an air filter with over 150% of normal filter area, an oil filter rated at three times the circulating oil volume or more, and a glass-fibre oil separator core.
An EC Declaration of Conformity for air compressors (No. 0P230209.SSE0Q23, issued by ECM, valid to 08 February 2028) and ISO 14001:2015 certification for air compressor design, production and sales (No. 05126E00664R053).
Yes. The Mexican 90 kW installation has run in continuous chemical service since 2017 in high-temperature, high-humidity and mildly corrosive conditions.
24/7 engineering after-sales support, original spare parts and market support. Sollant has a representative office in Mexico and exports to more than 100 countries.
Send your required capacity (m³/min), working pressure (bar), duty cycle and site conditions for model confirmation and a quotation.
Email: info@sollant.com · Tel / WhatsApp: +86 155-8905-3798
Shanghai Sollant Energy Saving Technology Co., Ltd., No.215, Songri Center, Beihongqiao, Jiading District, Shanghai, China.