{{ variable.name }}
Thirteen SLTL-T models combine two stage compression with 2.55-67.95 m³/min flow for 24-hour low-pressure duty.

SLTL-T two stage low-pressure screw air compressor, 4-5 bar, 22-220 kW.
The SLTL-T series is a two stage low-pressure screw air compressor covering 4-5 bar. Thirteen models run from 22 kW to 220 kW (30-335 hp) and deliver 2.55-67.95 m³/min through DN40 to DN150 outlets, with net weights from 1100 kg to 8100 kg. Compared with a single stage machine, two stage compression inside the same low-pressure band adds flow and extends bearing life, which is why these units are used for the 24-hour, high-intensity continuous operation typical of wastewater treatment plants and process plants.
Two stage compression holds the 4-5 bar band while lifting capacity to 67.95 m³/min, so a smaller footprint covers a larger air demand.
The two stage layout combines high energy efficiency with longer bearing life, an advantage in the 24-hour continuous operation of wastewater treatment plants.
5:6 asymmetrical rotor tooth profile in a large rotor, large bearing, low speed layout, verified with high-precision three-coordinate measurement for stable screw accuracy.
IP54 protection is more stable than IP23 in harsh environments. Temperature rise stays below 60 K and ceramic-plated bearings eliminate shaft current effects.
Frequency-controlled centrifugal fan holds oil temperature constant and keeps the cooler clear. Air filter, oil filter and glass-fibre oil separator handle filtration.
| Compressor type | Two stage low-pressure screw air compressor |
|---|---|
| Model series | SLTL-22T to SLTL-220T (13 models) |
| Working pressure | 4-5 bar |
| Capacity | 2.55-67.95 m³/min |
| Power | 22-220 kW |
| Horsepower | 30-335 hp |
| Noise | 65-80 ±3 dB |
| Air outlet diameter | DN40, DN50, DN65, DN80, DN125, DN150 |
| Net weight | 1100-8100 kg |
| Motor | Permanent magnet synchronous, IP54, temperature rise under 60 K |
| Material | Cast iron, stainless steel |
SLTL-22T · SLTL-30T · SLTL-37T · SLTL-45T · SLTL-55T · SLTL-75T · SLTL-90T · SLTL-110T · SLTL-132T · SLTL-160T · SLTL-185T · SLTL-200T · SLTL-220T
The 4-5 bar band and the higher flow ceiling suit wastewater treatment aeration, chemical production, cement and powder handling, and glass and ceramics manufacturing. In wastewater treatment the two stage low-pressure screw compressor is positioned for round-the-clock, high-intensity operation, matched with air filters and a refrigerated dryer, in humid, corrosive and high-temperature conditions.

Low-pressure compressor package prepared for export at the Sollant facility.
Sollant runs a 30,000 m² factory with approximately four production lines and an annual capacity of 20,000 units (about 600 per month), staffed by 150 employees and 20 engineers, including an in-house technical design department and an engineering R&D laboratory. Full OEM and ODM customization is offered, and 80% of output is exported to more than 100 countries.
A 90 kW low-pressure compressor has served a Mexican chemical producer since 2017, remaining in stable continuous operation for more than eight years. It supplies pneumatic conveying air for powdered and granular raw materials, sterile low-pressure air for fermentation tanks and reactors, and purging air for storage tanks, pipelines and filtration equipment.
Reported results: constant low-pressure output removes the energy waste of reducing pressure from a conventional high-pressure compressor, the unit runs 24/7 in high-temperature, high-humidity and potentially corrosive conditions with an extremely low failure rate, and stable air pressure improves fermentation and conveying uniformity while lowering electricity and maintenance costs.
The SLTL-S range is the single stage specification at 3-5 bar with 2.06-59.78 m³/min. The SLTL-T range is the two stage specification at 4-5 bar with 2.55-67.95 m³/min and up to 335 hp.
Two stage compression delivers higher flow inside the 4-5 bar band and combines high energy efficiency with extended bearing life, which suits 24-hour continuous operation.
The published two stage range reaches 67.95 m³/min at working pressures from 4 to 5 bar, with power from 22 to 220 kW.
DN40, DN50, DN65, DN80, DN125 and DN150, assigned according to model. Net weight ranges from 1100 kg to 8100 kg across the series.
The large rotor, low speed airend layout reduces noise and vibration, and the centrifugal fan runs quieter than an axial fan. Published noise is 65-80 ±3 dB.
An EC Declaration of Conformity for air compressors (No. 0P230209.SSE0Q23, issued by ECM, valid to 08 February 2028) and ISO 14001:2015 certification for air compressor design, production and sales (No. 05126E00664R053).
OEM and ODM projects are handled by the in-house design department and R&D laboratory. Share your specification and the engineering team will confirm feasibility.
Send your required capacity (m³/min), working pressure (bar), operating hours and site conditions for model confirmation and a quotation.
Email: info@sollant.com · Tel / WhatsApp: +86 155-8905-3798
Shanghai Sollant Energy Saving Technology Co., Ltd., No.215, Songri Center, Beihongqiao, Jiading District, Shanghai, China.