{{ variable.name }}
The SLTZO twin tower oxygen generator converts compressed air into oxygen at the point of use, from 5 to 300 Nm³/h, for plants that want to replace delivered liquid or bottled gas with an on-site supply.

The SLTZO series is a twin tower pressure swing adsorption oxygen generator. Two adsorption vessels packed with carbon molecular sieve alternate between adsorption and regeneration under Siemens PLC control, so oxygen flow and outlet pressure stay steady through 24-hour continuous operation. The range covers 5-300 Nm³/h with an inlet pressure of 0.4-0.6 MPa and an oxygen outlet pressure of 0.3-0.5 MPa, and the design targets buyers in air separation, laser cutting, electronics manufacturing and metal processing.
The internal structural design distributes airflow evenly across the sieve bed and reduces mechanical impact on the adsorbent, which supports a longer molecular sieve service life.
Vacuum-assisted automatic feeding, dense packing and vibration-table settling raise packing weight by more than 10% for the same volume and lower the friction coefficient inside the bed.
A spring-loaded or pneumatic compression mechanism automatically compensates for volume loss as the carbon molecular sieve settles, preventing the bed from loosening and pulverizing.
The controller starts the unit with a single command and requires no dedicated on-site personnel; interfaces for computers or mobile devices allow real-time monitoring of operating status.
Reliable air treatment components keep operation stable, support 24-hour continuous running and give a design service life of at least 5 years.
Gas that fails to meet the quality specification can be vented automatically or manually, protecting downstream equipment.
| Parameter | Value |
|---|---|
| Configuration | Twin tower PSA, dual adsorption vessels |
| Model range | SLTZO-5N to SLTZO-300N |
| Oxygen flow rate | 5-300 Nm³/h |
| Compressed air demand | 1-60 Nm³/min |
| Inlet pressure | 0.4-0.6 MPa |
| Oxygen outlet pressure | 0.3-0.5 MPa |
| Adsorbent | Carbon molecular sieve |
| Control system | Siemens PLC with remote monitoring interfaces |
| Operating mode | 24-hour continuous operation |
| Design service life | At least 5 years |
| Main materials | Aluminum alloy, stainless steel, carbon steel |
| Environmental certification | ISO 14001, certificate scope covers air compressor design, production and sales |
The series is offered in 21 model sizes, from SLTZO-5N through SLTZO-300N, together covering the stated 5-300 Nm³/h oxygen flow range and a compressed air demand of 1-60 Nm³/min. Buyers select the model against their required oxygen flow and the compressed air capacity available on site.
Vessels and frame are built in aluminum alloy, stainless steel and carbon steel. Inside each tower, the carbon molecular sieve is packed by an integrated loading process and held under compression, so the bed stays dense throughout the pressure cycles. Air treatment components upstream of the towers protect the sieve from moisture and particulate carry-over.
Carbon molecular sieve is sourced through partnerships with domestic and international sieve manufacturers, allowing the configuration to be matched to the customer operating conditions for energy efficiency. Remote connectivity interfaces are included as standard, and OEM/ODM customization is supported by the manufacturer.
From 5 to 300 Nm³/h across the SLTZO-5N to SLTZO-300N model range.
1-60 Nm³/min of compressed air at an inlet pressure of 0.4-0.6 MPa.
The oxygen outlet pressure range is 0.3-0.5 MPa.
Yes. The system supports 24-hour continuous operation with a design service life of at least 5 years.
Even airflow distribution limits impact on the adsorbent, dense loading raises packing weight by over 10% for the same volume, and a spring-loaded or pneumatic compression mechanism compensates for settling.
No dedicated personnel are required. Siemens PLC control provides one-touch startup plus interfaces for remote connection to computers or mobile devices.
Yes. Sieve selection is matched to the operating conditions, and OEM/ODM customization is available.
Share your required flow rate, feed air conditions and site layout, and the engineering team will confirm the matching SLTZO model.
twin-tower-oxygen-generator-sltzo-dual-vessel-front.pngAlt: SLTZO twin tower oxygen generator with dual adsorption vesselstwin-tower-oxygen-generator-sltzo-plc-cabinet.pngAlt: Siemens PLC control cabinet on the SLTZO oxygen generatortwin-tower-oxygen-generator-sltzo-sieve-loading.pngAlt: Carbon molecular sieve loading on the twin tower skid