{{ variable.name }}
A direct driven screw air compressor with an integrated refrigerated dryer and precision filter, built for machinery workshops where pneumatic tools and assembly lines run continuously alongside high noise and vibration.

Direct driven air compressor with dryer, with refrigerated dryer and C/T precision filter in one chassis
Machinery manufacturing depends on a pressure band that does not move: every pneumatic tool, clamp and assembly station on the line draws from the same header. This air compressor with dryer combines a direct driven screw main unit, motor, cooling system, intake system, control system, refrigerated dryer and precision filter in one compact chassis, so dried and filtered air enters the piping network immediately. The package keeps moisture and oil out of the network, holds noise at 60-70+/-2 dB(A), and is tested before shipment with a measured vibration value far below the international standard.
Direct driven transmission delivers a steady air supply for pneumatic tools and assembly lines, with displacement from 150 to 980 L/min across the series and pressure selectable at 7-12 bar.
Every unit passes strict testing before delivery and the measured vibration value is far below the international standard, which matters when the compressor sits on the same floor as precision machining.
The built-in refrigerated dryer and C/T precision filter remove moisture and oil before the air enters the workshop network, protecting downstream pneumatic equipment and helping extend its service life.
Combined with an air receiver tank, the package holds pressure steady through the network so tools at the far end of the line are not starved during peak demand.
The integrated chassis removes the need for a separate dryer room, addressing the space constraints of small and medium workshops.
Noise of 60-70+/-2 dB(A) supports continuous operation on a production floor where operators work nearby.
| Parameter | Specification |
|---|---|
| Model series | SLTC-7.5 to SLTC-132 |
| Power | 7.5-132 kW |
| Horsepower | 10-175 hp |
| Working pressure | 7-12 bar |
| Displacement | 150-980 L/min |
| Air outlet pipe diameter | DN20 / DN25 / DN40 / DN50 / DN65 |
| Noise level | 60-70 +/-2 dB(A) |
| Driven method | Direct driven |
| Air dryer capacity | 85-1165 CFM |
| Air dryer pressure | 16 bar |
| Precision filter capacity | 85-1165 CFM |
| Precision filter pressure | 16 bar |
| Precision filter grade | C / T class |
| Material | Carbon steel, alloy steel |
| Conformity | EC Declaration of Conformity 0P230209.SSE0Q23 (ECM), ISO 14001:2015 |
Thirteen models are available: SLTC-7.5, SLTC-11, SLTC-15, SLTC-18.5, SLTC-22, SLTC-30, SLTC-37, SLTC-45, SLTC-55, SLTC-75, SLTC-90, SLTC-110 and SLTC-132, spanning 7.5-132 kW (10-175 hp) with outlets from DN20 to DN65. Workshop networks are typically completed with an air receiver tank, and where a laser cutter is part of the line the plug-and-play integrated layout also applies. For energy-intensive production lines, Sollant's two-stage compression variable-frequency screw compressors are quoted with energy savings of 15%-40%, while the permanent-magnet variable-frequency series reaches 30%-35%.
Carbon steel and alloy steel are used throughout the chassis and main assembly. The modular design structure groups the screw main unit, motor, cooling system, intake system, control system, refrigerated dryer and filters on one frame, ready to install and work. The refrigerated dryer uses a compact rotary refrigeration compressor with a high cooling capacity configuration to remain reliable at high ambient temperatures, and the integrated layout reduces the parts and connectors that could fail or leak.
The reference duty is machinery manufacturing: workshop noise and vibration with a continuous industrial environment, where the package supplies pneumatic tools and assembly lines, and where the dryer and C/T precision filter protect downstream pneumatic equipment across the network. Packaging lines and woodworking shops use the same integrated platform, and laser cutter systems are also served by the plug-and-play configuration.
OEM/ODM customization is available, supported by an in-house technical design department and an engineering R&D laboratory, with roughly 80% of output exported to over 100 countries and regions including North America, Europe, Asia, South America, Oceania and Africa. Air compressor conformity is documented by EC Declaration of Conformity 0P230209.SSE0Q23 issued by ECM under EN 1012-1:2010, EN ISO 12100:2010 and EN 60204-1:2018, valid until 2028-02-08; ISO 14001:2015 certification is held under NOA certificate 05126E00664R053.
Direct driven transmission keeps the air supply steady for pneumatic tools and assembly lines, and the units are tested before shipment with vibration far below the international standard.
Yes. The integrated refrigerated dryer and C/T precision filter remove moisture and oil before the air enters the network, which protects downstream pneumatic equipment and helps extend its service life.
For a workshop network an air receiver tank is commonly added with the dryer and filter to hold pressure stable through the piping, so peak draws do not starve tools at the far end of the line.
Displacement spans 150-980 L/min over models SLTC-7.5 to SLTC-132 at 7-12 bar. Provide the tool list and simultaneous usage and we will confirm the model and outlet size.
Noise is 60-70+/-2 dB(A) across the series, which supports continuous operation on a production floor.
Air compressor conformity is covered by EC Declaration of Conformity 0P230209.SSE0Q23 issued by ECM, valid until 2028-02-08, and the company operates an ISO 14001:2015 environmental management system.
Send the pneumatic tool and assembly station list, target pressure and pipe run, and we will confirm the model, outlet diameter and whether a receiver tank should be added.
Email: info@sollant.com
Tel: +86 155-8905-3798
WhatsApp: +86 155-8905-3798
Address: No.215, Songri Center, Beihongqiao, Jiading District, Shanghai, China