{{ variable.name }}
A ready-to-use screw air compressor with an integrated refrigerated dryer and precision filter, built for dusty, high-temperature woodworking shops that run edge banding, panel splicing and painting lines.

SLTC series air compressor with dryer: screw unit, refrigerated dryer and filters on one chassis
The SLTC series air compressor with dryer integrates the screw main unit, drive motor, cooling system, intake system, control system, refrigerated dryer and precision filter on a single chassis. Compressed air is dried and filtered before it leaves the package, so edge banding machines, panel splicing machines and pneumatic fixtures receive stable, dry air. Because the drying stage travels with the compressor, the separate dryer room and most interconnecting pipework of a split installation are no longer needed, which is why the layout suits small and medium woodworking workshops where floor area is limited.
Screw main unit, motor, cooling system, intake system, control system, refrigerated dryer and filters share one compact chassis. Fewer parts and connectors reduce the possibility of unit failure and leakage, and dry compressed air is discharged directly from the package.
The built-in refrigerated dryer uses high-efficiency heat exchangers and a compact rotary refrigeration compressor to pull the moisture content of the compressed air down, so condensate does not reach downstream painting equipment.
A C/T class precision filter performs deep water and oil removal, which helps prevent oil spots and blisters on painted furniture surfaces and supports a cleaner finished product.
One package replaces a separate compressor and dryer installation and simplifies the equipment layout, keeping floor area free for production in compact workshops.
Noise level is 60-70+/-2 dB(A) and the units are direct driven, matching the continuous operation pattern of woodworking shops.
Routine servicing covers one package instead of several independent units and their complex piping systems, giving maintenance staff a single service point.
| Parameter | Specification |
|---|---|
| Model series | SLTC-7.5 to SLTC-132 |
| Power | 7.5-132 kW |
| Horsepower | 10-175 hp |
| Working pressure | 7-12 bar |
| Displacement | 150-980 L/min |
| Air outlet pipe diameter | DN20 / DN25 / DN40 / DN50 / DN65 |
| Noise level | 60-70 +/-2 dB(A) |
| Driven method | Direct driven |
| Air dryer capacity | 85-1165 CFM |
| Air dryer pressure | 16 bar |
| Precision filter capacity | 85-1165 CFM |
| Precision filter pressure | 16 bar |
| Precision filter grade | C / T class |
| Material | Carbon steel, alloy steel |
| Conformity | EC Declaration of Conformity 0P230209.SSE0Q23 (ECM), ISO 14001:2015 |
Available models are SLTC-7.5, SLTC-11, SLTC-15, SLTC-18.5, SLTC-22, SLTC-30, SLTC-37, SLTC-45, SLTC-55, SLTC-75, SLTC-90, SLTC-110 and SLTC-132, covering 7.5-132 kW (10-175 hp). Working pressure is selectable from 7 to 12 bar, and the air outlet is available in DN20, DN25, DN40, DN50 or DN65. Integrated dryer and precision filter capacity spans 85-1165 CFM at 16 bar. Send the machine list and required pressure of your shop and the matching model can be confirmed.
The package is built in carbon steel and alloy steel. Its new modular design structure keeps the layout compact and ready to install and work: screw main unit, motor, cooling system, intake system, control system, refrigerated dryer and filters are assembled on one frame. Every unit is strictly tested before shipment, and the measured vibration value is far below the international standard.
Woodworking is the reference application, where high dust, high temperature and vibration are normal working conditions and operation is continuous. The package supplies edge banding machines, panel splicing machines and pneumatic fixtures with stable basic power, while the refrigerated dryer and C/T precision filter keep moisture and oil out of the air used for painting, protecting the finish of the furniture. The same integrated layout is also deployed in machinery manufacturing and packaging lines.
Sollant supports OEM/ODM customization and maintains an in-house technical design department and an engineering R&D laboratory. Around 80% of output is exported to more than 100 countries and regions across North America, Europe, Asia, South America, Oceania and Africa. Air compressor conformity is covered by EC Declaration of Conformity 0P230209.SSE0Q23 issued by ECM under EN 1012-1:2010, EN ISO 12100:2010 and EN 60204-1:2018, valid until 2028-02-08; the company also operates an ISO 14001:2015 environmental management system certified by NOA under certificate 05126E00664R053.
The refrigerated dryer and the C/T precision filter remove moisture and oil. Dried air leaves the package directly, which is what protects edge banding machines, panel splicing machines and painting equipment downstream.
Yes. The series is built for continuous operation, and the woodworking working conditions of high dust, high temperature and vibration are the reference duty for this configuration.
Model numbers run from SLTC-7.5 to SLTC-132 (7.5-132 kW / 10-175 hp), with displacement of 150-980 L/min and pressure of 7-12 bar. The correct size follows the total air demand of your machines.
Noise is quoted at 60-70+/-2 dB(A) across the series.
Air compressor conformity is covered by EC Declaration of Conformity 0P230209.SSE0Q23 issued by ECM under EN 1012-1:2010, EN ISO 12100:2010 and EN 60204-1:2018, valid until 2028-02-08.
Outlets are offered in DN20, DN25, DN40, DN50 and DN65; the right size follows the model and the flow it delivers.
Tell us the machines to be powered, the required working pressure and the available floor space, and we will confirm the model, outlet size and dryer capacity.
Email: info@sollant.com
Tel: +86 155-8905-3798
WhatsApp: +86 155-8905-3798
Address: No.215, Songri Center, Beihongqiao, Jiading District, Shanghai, China