{{ variable.name }}
SLT series · 70–4000 m³/min · 2.1–12.5 barg · 100% oil-free air delivery
SLT centrifugal turbo air compressor — compact skid package for small units
The SLT single-stage centrifugal turbo air compressor is the compact-arrangement option in the SLT series. Small units are built as an integrated skid, so the compressor, its oil-free compression path and the control package arrive as one liftable assembly — practical where floor space is limited and installation windows are short. Series datasheet values are 70–4000 m³/min flow, 2.1–12.5 barg outlet pressure and 11.0–85.0 t unit weight; final figures are fixed per selected model and configuration.
Designed in NREC software with backward-swept blades, a low-solidity airfoil diffuser and an optimized volute tongue, keeping stage efficiency across a wider operating range.
Every impeller, gearbox and rotor is precision balanced and overspeed tested before shipment, so vibration stays well below standard requirements.
Small SLT units ship as one skid-mounted package, which reduces site piping and commissioning work; large units move to a split arrangement.
The control system calculates the minimum load limit automatically and caps maximum load under variable conditions to protect the motor from overcurrent.
No oil is used in the compression path, so the air stream leaves the machine oil-free for food, pharmaceutical and instrument-air duties.
Impellers and gearboxes are designed, machined and tested in-house, so quality consistency and delivery do not depend on outside suppliers.
| Model series | SLT300, SLT800, SLT1250, SLT1800, SLT2500, SLT3700, SLT6000, SLT8000, SLT72000 |
|---|---|
| Flow rate | 70–4000 m³/min (series range) |
| Outlet pressure | 2.1–12.5 barg (series range) |
| Unit weight | 11.0–85.0 t |
| Compression stage | Single-stage configuration (multi-stage also offered in the SLT series) |
| Arrangement | Integrated skid for small units; split arrangement for large units |
| Impeller and wetted material | Titanium alloys, stainless steel |
| Rotor dynamic balance | Grade below G1 |
| Delivered air | 100% oil-free |
| Gas media | Air, nitrogen, oxygen-enriched gas |
The series runs from SLT300 through SLT8000 up to SLT72000. Single-stage and multi-stage configurations are both available, and the arrangement follows unit size: integrated skid for small frames, split layout for large frames. Because flow and pressure are fixed per model, the duty point decides the frame size rather than the reverse.
Impellers and wetted parts are offered in titanium alloys and stainless steel. The semi-open 3D impeller, in-house gearbox and balanced rotor assembly form the core of the machine, and the skid frame carries compressor and controls as a single package. The gas path is oil-free from inlet to discharge.
Wastewater aeration air supplyFood and pharmaceutical oil-free airGlass and automotive manufacturingGeneral plant and instrument airCement and construction materials
Configuration can be fixed as single-stage or multi-stage, arrangement as integrated skid or split, gas medium as air, nitrogen or oxygen-enriched gas, and materials as titanium alloys or stainless steel. OEM and ODM support is available for OEM-branded projects.
The SLT series covers both configurations. Send your required flow and discharge pressure and the engineering team will confirm which configuration and model matches the duty.
Yes. The SLT series is specified for 100% oil-free air delivery, which is why it is used for food, pharmaceutical and instrument-air duties.
Rotor assembly dynamic balance is below G1, with precision balancing and overspeed testing of every impeller, gearbox and rotor before shipment.
The series handles air, nitrogen and oxygen-enriched gas. Confirm the gas composition and purity target at inquiry so the configuration can be fixed.
An EC Declaration of Conformity for air compressors (ECM, no. 0P230209.SSE0Q23, valid to 2028-02-08) and ISO 14001 environmental management certification (NOA, no. 05126E00664R053, valid to 2029-03-26).
Price and delivery depend on model, configuration and gas medium. Share the duty point and the team will reply with a configuration-based offer.