{{ variable.name }}
A factory-assembled modular oxygen generator for on-site gas production from 5 to 300 Nm³/h, built on a skid for short installation work and a small footprint.

The SLTZO modular oxygen generator packages the adsorption towers, air treatment components and Siemens PLC control on a single skid. Compressed air at 0.4-0.6 MPa enters the unit and leaves as oxygen at 0.3-0.5 MPa, with flow options from 5 to 300 Nm³/h. Because the module is assembled and tested before shipment, site work is limited to connecting air, power and the oxygen line, and the compact skid footprint suits plants where floor space is tight.
The integrated skid design supports plug-and-play installation, removes the need for complex site piping and keeps the required floor space to a minimum.
Vacuum-assisted automatic feeding, dense packing and vibration-table settling increase packing weight by more than 10% for the same volume and reduce the friction coefficient inside the bed.
The controller starts the module with one command and needs no dedicated on-site personnel; remote interfaces for computers or mobile devices allow live status checks.
A spring-loaded or pneumatic compression mechanism automatically compensates for carbon molecular sieve volume loss caused by settling, preventing loosening and pulverizing.
Reliable air treatment components maintain stable operation for 24-hour continuous running, with a design service life of at least 5 years.
Gas that fails to meet the quality specification can be vented automatically or manually before it reaches the process.
| Parameter | Value |
|---|---|
| Configuration | Modular skid-mounted PSA unit |
| Model range | SLTZO-5N to SLTZO-300N |
| Oxygen flow rate | 5-300 Nm³/h |
| Compressed air demand | 1-60 Nm³/min |
| Inlet pressure | 0.4-0.6 MPa |
| Oxygen outlet pressure | 0.3-0.5 MPa |
| Adsorbent | Carbon molecular sieve |
| Control system | Siemens PLC with remote monitoring interfaces |
| Operating mode | 24-hour continuous operation |
| Design service life | At least 5 years |
| Main materials | Aluminum alloy, stainless steel, carbon steel |
| Environmental certification | ISO 14001, certificate scope covers air compressor design, production and sales |
Twenty-one model sizes are available, from SLTZO-5N through SLTZO-300N, spanning the 5-300 Nm³/h oxygen flow range. Each model is specified together with the compressed air demand of 1-60 Nm³/min, so the module can be sized against the air compressor already installed on site.
Aluminum alloy, stainless steel and carbon steel are used for the module frame and pressure vessels. The adsorbent is loaded by an integrated process and held under compression inside the towers, while the air treatment components upstream protect the carbon molecular sieve from moisture and particulate carry-over.
Carbon molecular sieve is sourced through partnerships with domestic and international sieve manufacturers, so the module can be configured for the most energy-efficient operation under the customer actual working conditions. Remote connectivity interfaces are included, and OEM/ODM customization is supported.
The towers, air treatment components and PLC come assembled on one skid, which supports plug-and-play installation, avoids complex site piping and keeps the footprint small.
From 5 to 300 Nm³/h across the SLTZO-5N to SLTZO-300N model range.
Compressed air at 1-60 Nm³/min and an inlet pressure of 0.4-0.6 MPa; oxygen is delivered at 0.3-0.5 MPa.
Yes. Siemens PLC control allows one-touch startup, and remote interfaces for computers or mobile devices let staff monitor status without standing at the unit.
The system is designed for 24-hour continuous operation with a service life of at least 5 years; even airflow distribution, dense loading and the compression mechanism all work to protect the sieve.
Yes. It is specified alongside air compressors, filters, air dryers and air tanks in integrated on-site gas generation solutions for laser cutting.
Yes. Sieve selection is matched to site conditions, and OEM/ODM customization is supported.
Send your required oxygen flow, available compressed air capacity and installation space, and the team will propose the matching SLTZO module.
modular-oxygen-generator-sltzo-skid-front.pngAlt: Skid-mounted SLTZO modular oxygen generator seen from the frontmodular-oxygen-generator-sltzo-control-panel.pngAlt: Siemens PLC control panel on the modular oxygen generatormodular-oxygen-generator-sltzo-installed-line.pngAlt: Modular oxygen generator connected to an on-site gas supply line