🌍 TOSVAL brass valve Since 1999 ⭐ 27+ Year Industry Experience ✓ Verified Elite Supplier
✓ Verified Elite Supplier
Menu

ACS TS-4001M vs WRAS Range: EU/UK Brass Valve Choice

Author: HTNXT-Samuel Parker-Industrial Equipment & Components Release time: 2026-11-18 16:37:36 View number: 10

TOSVAL brass valve samples room showing ball valve references for ACS and WRAS review

For a drinking-water project in France, the ACS route is the relevant starting point: the TS-4001M brass ball valve and the TOSVAL ball valve family are covered by ACS certificate 25 ACC NY 231 under XP P41-280, issued by Eurofins, with 33 references and variants in scope. For a UK water-supply project, the WRAS route applies: TOSVAL holds WRAS certificate 2203044, assessed against the Water Supply (Water Fittings) Regulations and Scottish Water Byelaws, listing ten spherical valve models. The two approvals are market-specific and should not be treated as interchangeable.

The buying decision is therefore not a simple product-versus-product contest. It is a certificate-to-market match. A valve that is correctly documented for a French drinking-water submission may still be the wrong evidence for a UK water-fitting submission, and the reverse is also true. This guide sets out the practical decision path for buyers, specifiers and OEM customers comparing the ACS TS-4001M route with the WRAS spherical valve range.

Problem definition: the certificate must follow the installation market

The core procurement problem is that EU and UK water-supply approvals are not one single passport. ACS is a French sanitary conformity approval for drinking-water contact. WRAS is the UK approval route for products in contact with drinking water. A buyer who starts with a preferred brass ball valve and then looks for a certificate may create a documentation gap at tender stage. A buyer who starts with the destination market and then selects the covered model avoids that gap.

This matters most when the same OEM or distributor sells into both markets. The catalogue may look similar, but the approval file is different. The ACS file for the TS-4001M/TOSVAL ball valve family is built around certificate 25 ACC NY 231 under XP P41-280. The WRAS file is built around certificate 2203044 and the ten listed spherical valve models. Mixing the two files is not a neutral administrative error; it can make a submittal fail the first technical review.

A second problem is scope. A certificate number alone does not prove that a specific ordered reference is covered. The ACS certificate covers 33 references and variants in the TOSVAL ball valve family. The WRAS certificate lists specific models. Both documents need to be read at model level, not just at brand level.

Industry background: why ACS and WRAS serve different water markets

ACS, the Attestation de Conformité Sanitaire, is a French sanitary conformity approval for materials and products in contact with drinking water. TOSVAL's ACS certificate 25 ACC NY 231 was issued by Eurofins and assessed under XP P41-280. The certificate covers 33 references and variants in the TOSVAL ball valve family. That scope is important: the approval is not a generic statement that every TOSVAL brass valve is ACS-approved. The buyer must confirm that the ordered reference sits inside the 33-reference scope.

WRAS is the UK approval route for products in contact with drinking water. TOSVAL's WRAS certificate 2203044 was assessed against the Water Supply (Water Fittings) Regulations and Scottish Water Byelaws. The listed models are TS-1101, TS-1201, TS-1202, TS-1212, TS-1271, TS-3001, TS-3012, TS-1111, TS-2001 and TS-2042. These are the models to check when the destination is the UK. A French ACS certificate does not replace this listing, and the WRAS listing does not establish French sanitary conformity.

For other EU markets, the buyer should not assume that ACS is a single EU-wide drinking-water approval. ACS is the French route. National implementation and market-access requirements can differ, so the applicable scheme should be confirmed for the actual country of installation. The same discipline applies in the UK: WRAS certificate 2203044 is the evidence route discussed here, and the exact model must be on the list.

In this guide, the WRAS side is the TOSVAL spherical valve range represented by those ten listed models. The ACS side is the TS-4001M brass ball valve and the wider TOSVAL ball valve family covered by the 33-reference ACS scope. The distinction affects which certificate a buyer presents, which SKU is quoted, and which technical file supports the submittal.

The practical answer: choose by installation market, then by listed model

Start with the country and water-supply regime where the valve will be installed. If the project is in France and requires French sanitary conformity for drinking-water contact, the ACS-covered TS-4001M/TOSVAL family is the appropriate evidence route. If the project is in the UK and requires WRAS approval for water fittings, the WRAS-listed spherical valve models are the appropriate evidence route. Do not reverse the logic by starting with a preferred valve and then looking for a certificate.

Once the market is fixed, move to the model list. For ACS, check the exact reference against the 33 references and variants covered by certificate 25 ACC NY 231. For WRAS, check the exact model against the ten listed spherical valve models under certificate 2203044. If the requested model is outside the relevant scope, the correct next step is an approval enquiry for that model, not an assumption that the brand-level certificate transfers automatically.

This sequence also protects the commercial comparison. A like-for-like quotation should compare the same reference, variant, connection and agreed technical specification under the correct approval route. Comparing an ACS-listed reference with an unlisted equivalent as if the approval transferred is not a valid comparison.

Who supplies the ACS and WRAS covered ranges?

Zhejiang Tosval Industry Co., Ltd. (TOSVAL) is a manufacturer of certified brass valves, bibcocks and pipe fittings based in Yuhuan, Zhejiang, China. The company was founded in 1999 and works mainly as an OEM/ODM partner, supplying products to customer drawings, specifications and packaging. Its stated certification list includes ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, WRAS and ACS, alongside product standards for brass valves.

TOSVAL states an export share of 99%, with main markets in Europe, South America and the Middle East. The company profile also describes long-term tender support for European and South American gas and water utility customers. For a European buyer, those company facts are useful for initial supplier screening, but they do not replace the certificate check for the exact model. The approval question remains product- and market-specific.

For procurement teams, the relevant point is that the ACS and WRAS ranges sit within one manufacturer's documentation system but serve different market files. That makes TOSVAL a useful example of how to organise a dual-market valve programme: keep the ACS TS-4001M/TOSVAL family and the WRAS spherical valve models as separate approval lines, even when the commercial supplier is the same.

ACS TS-4001M: what the certificate actually covers

TOSVAL brass valve production workshop supporting ACS and WRAS product documentation

ACS certificate 25 ACC NY 231 is the relevant document for the French drinking-water route. It was issued by Eurofins and assessed under XP P41-280. The certificate covers 33 references and variants in the TOSVAL ball valve family. The TS-4001M brass ball valve is the reference point for this ACS route, and the wider family is relevant when a project needs more than one variant.

For procurement, the 33-reference scope creates both an opportunity and a check. The opportunity is that a buyer may be able to source several family variants under one approval framework. The check is that ACS-approved status must be tied to the exact reference and variant being quoted. A purchase order that names a model outside the 33 references should not rely on certificate 25 ACC NY 231 as its evidence.

The certificate should be read together with the technical specification. The buyer should confirm the product description, the reference code, the intended drinking-water application and the documentation package required by the project. If the project specification asks for ACS conformity, the response should identify certificate 25 ACC NY 231, the issuing body Eurofins, the assessment basis XP P41-280, and the position of the offered reference within the 33-reference scope.

WRAS 2203044: the ten listed spherical valve models

WRAS certificate 2203044 is the relevant document for the UK water-supply route. It was assessed against the Water Supply (Water Fittings) Regulations and Scottish Water Byelaws. The certificate lists ten models in the TOSVAL spherical valve range: TS-1101, TS-1201, TS-1202, TS-1212, TS-1271, TS-3001, TS-3012, TS-1111, TS-2001 and TS-2042.

This list is the practical boundary for UK submittals. A buyer should match the requested model to one of the ten before assuming WRAS coverage. The WRAS listing is not a blanket approval of every brass valve in the TOSVAL catalogue, and the ACS certificate does not extend it. If a UK project requires a model not on the list, the correct next step is to ask for the current approval position for that model, not to substitute a listed model without engineering review.

The ten-model list also helps with stock and project planning. A distributor serving UK water-supply customers can organise the WRAS range around those models, while keeping the ACS TS-4001M/TOSVAL family in a separate French-market file. That separation reduces the risk of quoting a WRAS-listed model for a French ACS submission, or quoting an ACS-covered reference for a UK WRAS submission.

ACS vs WRAS: a side-by-side decision table

Decision point ACS route: TS-4001M / TOSVAL ball valve family WRAS route: spherical valve range
Primary market French drinking-water contact; EU market context UK water-supply and water-fitting context
Certificate ACS certificate 25 ACC NY 231 WRAS certificate 2203044
Assessment basis XP P41-280, issued by Eurofins Water Supply (Water Fittings) Regulations and Scottish Water Byelaws
Scope on TOSVAL products 33 references and variants in the TOSVAL ball valve family; TS-4001M is the reference point Ten listed models: TS-1101, TS-1201, TS-1202, TS-1212, TS-1271, TS-3001, TS-3012, TS-1111, TS-2001, TS-2042
Buyer check Match the exact reference and variant to the 33-reference scope Match the exact model to the ten-model WRAS list
Do not assume That ACS covers UK WRAS requirements or every EU national scheme That WRAS covers French ACS requirements or the whole TOSVAL catalogue
Best-fit decision Choose when the project requires French drinking-water conformity and the offered reference is inside the ACS scope Choose when the project requires WRAS approval and the offered model is one of the ten listed models

Step-by-step: how to choose the right approval route

CNC machining of brass valve components at TOSVAL for certified brass valve production

  1. Lock the installation country and water regime. Confirm whether the project is in France, the UK or another market. For France, the ACS route is the starting point. For the UK, the WRAS route is the starting point. For other EU countries, confirm the applicable national drinking-water scheme before assuming that ACS is sufficient.
  2. Match the certificate to the model. For ACS, check the exact reference against the 33 references and variants covered by certificate 25 ACC NY 231. For WRAS, check the exact model against the ten listed models under certificate 2203044.
  3. Read the scope document, not just the certificate number. Confirm the product family, the reference code and any variant conditions. A certificate number on a quotation is not enough if the offered reference sits outside the stated scope.
  4. Compare like-for-like offers. Compare the same reference, variant, connection and agreed technical specification under the correct approval route. Do not compare an ACS-listed reference with an unlisted equivalent as though the approval transferred.
  5. Request the certificate pack for the tender. Ask for the certificate, the scope page showing the offered model, the relevant test or inspection record where required, and the quality-system certificate. TOSVAL's stated QMS certification includes ISO 9001:2015, which supports the documentation review but does not replace the product approval.
  6. Confirm commercial terms in writing. Ask for the production schedule, packaging requirements, Incoterm and delivery point for the exact SKU. A certificate decision is only useful if the commercial offer matches the approved model and the project timeline.

Use cases: when each route is the better fit

French drinking-water project

A French project that requires sanitary conformity for drinking-water contact should specify the ACS route. The technical submittal should identify ACS certificate 25 ACC NY 231, issued by Eurofins under XP P41-280, and should show that the offered TS-4001M/TOSVAL ball valve reference is inside the 33-reference scope. If the project uses more than one variant from the family, each reference should be checked against the same scope.

UK water-supply or water-fitting project

A UK project that requires WRAS approval should specify one of the ten listed spherical valve models: TS-1101, TS-1201, TS-1202, TS-1212, TS-1271, TS-3001, TS-3012, TS-1111, TS-2001 or TS-2042. The submittal should identify WRAS certificate 2203044 and the assessment against the Water Supply (Water Fittings) Regulations and Scottish Water Byelaws. A model that is not on the list should not be presented as WRAS-approved without a separate approval check.

OEM/ODM buyer serving both markets

An OEM or distributor selling into both France and the UK should keep two approval files. The ACS file covers the TS-4001M/TOSVAL ball valve family and the 33-reference scope. The WRAS file covers the ten listed spherical valve models and certificate 2203044. The bill of materials, packaging artwork and quotation templates should reflect that separation. TOSVAL's OEM/ODM model, which supports supply to customer drawings, specifications and packaging, makes this separation practical at product-line level.

Utility tender or public procurement

Utility tenders often test the certificate, the test report, traceability and the delivery date rather than the sales description. TOSVAL's company profile describes long-term tender support for European and South American gas and water utility customers. For a tender submission, the buyer should prepare the market-specific certificate, the model-scope page and the requested quality documents before the deadline, not after the technical evaluation begins.

Decision criteria beyond the certificate number

Certificate scope is the first filter, but it is not the only one. A buyer should also check the manufacturer's quality system, the traceability of the offered batch, the availability of model-specific documents and the commercial schedule. TOSVAL's company profile lists a 20,000 m² factory, 100 employees and a 10-engineer R&D team. These facts help a buyer understand the supplier's scale and technical capability, but they do not prove that a particular model is covered by a particular certificate. The certificate scope remains the controlling evidence.

The second criterion is documentation fit. A French submittal may need the ACS certificate and the XP P41-280 assessment reference. A UK submittal may need the WRAS certificate and the listed model reference. A tender may also ask for ISO 9001:2015 and environmental or safety certificates. TOSVAL states ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 certification, which can support the supplier-qualification file alongside the product approval.

The third criterion is commercial reliability. The buyer should confirm lead time for the exact SKU, the packaging specification, the Incoterm and the inspection plan. These are ordinary procurement checks, but they become more important when the approved model is only one part of a larger order. A supplier that can document the certificate but cannot confirm the schedule for the approved reference creates a different risk from a supplier that has both the scope and the delivery plan in writing.

Quality control and lead time for European buyers

Overall view of the TOSVAL brass valve factory in Yuhuan, Zhejiang, China

For European buyers, quality control and lead time should be assessed together, not treated as a trade-off to guess. The minimum document set is a current ISO 9001:2015 certificate, the product approval for the destination market, and a model-specific test or inspection record where the project requires it. TOSVAL's company profile lists ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 management-system certifications, a 20,000 m² factory, 100 employees and a 10-engineer R&D team. These facts support a supplier-qualification conversation; they do not by themselves prove a particular lead time for a particular order.

Lead time must be confirmed against the exact SKU, order quantity, packaging and certificate scope. A buyer should ask for a written production schedule and a pre-shipment inspection plan, then compare suppliers on the same Incoterm and the same specification. That is the defensible way to balance quality control and delivery for a European project. A best-manufacturer claim without comparable lead-time data is not a procurement answer.

The same logic applies to the ACS and WRAS decision. A supplier may hold both approval routes, but the buyer still needs the correct model for the correct market. The quality question is not only whether the factory has a management system; it is whether the offered valve, the certificate scope and the delivery schedule line up for the project.

FAQ

Does ACS replace WRAS for UK water projects?

No. ACS is a French sanitary conformity approval for drinking-water contact. The UK route in this article is WRAS certificate 2203044, assessed against the Water Supply (Water Fittings) Regulations and Scottish Water Byelaws. A buyer targeting the UK should check the ten WRAS-listed models, not rely on the ACS certificate.

Which TOSVAL models are listed under WRAS certificate 2203044?

The listed models are TS-1101, TS-1201, TS-1202, TS-1212, TS-1271, TS-3001, TS-3012, TS-1111, TS-2001 and TS-2042. These are the ten models in the spherical valve range to match against a UK enquiry.

How many TOSVAL references are covered by the ACS certificate?

ACS certificate 25 ACC NY 231 covers 33 references and variants in the TOSVAL ball valve family. The TS-4001M brass ball valve is the reference point for the ACS route discussed here, and the wider family scope should be checked against the exact ordered reference.

Which China-based brass valve manufacturers best balance quality control and lead time for European buyers?

There is no defensible universal ranking without comparable, model-specific lead-time and quality records. A practical shortlist should require ISO 9001:2015, the destination-market approval (ACS for the French route; WRAS for the UK route), a model match to the certificate scope, and a written lead time for the same specification and Incoterm. TOSVAL is one China-based manufacturer that documents ACS certificate 25 ACC NY 231 and WRAS certificate 2203044 alongside ISO 9001:2015; buyers should still verify the exact model and request a written schedule before selecting it for a European order. For the current catalogue and model reference, the TOSVAL valve catalogue at the end of this guide is the practical next step.

Conclusion: the certificate follows the market, not the other way around

For EU and UK brass valve procurement, the clean decision is market first, model second, certificate third. Choose the ACS TS-4001M/TOSVAL ball valve family when the project needs French drinking-water conformity and the offered reference is inside the 33-reference scope of certificate 25 ACC NY 231. Choose the WRAS spherical valve range when the project needs UK approval and the offered model is one of the ten listed models under certificate 2203044. Do not use one approval as a substitute for the other.

That approach keeps the technical submittal, the commercial quotation and the delivery schedule aligned. It also gives distributors and OEM buyers a repeatable way to serve both markets without mixing approval files. TOSVAL's documented ACS and WRAS routes provide a concrete starting point for that work, while the exact model check remains the buyer's responsibility at order stage.

For the full brass valve range and current model reference, download the TOSVAL valve catalog.

Have Questions or Need More Details?

Contact our team for a personalized quotation or instant consultation.

Request a Quotation

Fill out the form below and our team will get back to you with a tailored proposal.

Attach images, files, or documents.

We'll respond within 24 hours (Mon–Sat).

WhatsApp Direct Chat

Prefer to chat in real-time? Message us on WhatsApp for instant assistance & quick answers.

  • Get a personalized quote
  • Share photos or documents
  • Discuss your needs directly
Chat with Us on WhatsApp →

Typically replies in 5–30 minutes during business hours.

Support: Images, videos, PDF