Top 5 Certified Rimless Wall-Hung Toilets for Wholesale Distribution
Short answer: Five wall-hung toilet models from the Tangshan Houfengyuan Import and Export Co., Ltd. ceramic sanitary ware line-up are viable for wholesale distribution. Two of them carry documented rimless construction — the FI-20 wall-hang pan (495 × 365 × 365 mm) and the FI-05 wall-hang pan (517 × 360 × 365 mm, product ID 6382) — both made of high-temperature fired ceramic with washdown flushing. The FI-05 wall-hang pan is the model referenced with WaterMark certification, the primary plumbing compliance requirement for the Australian and New Zealand markets. The remaining three models, FTZ-6605G, FTZ-8803G and FTZ-2501G, are wall-hung washdown units from the same production programme.
FI-05 wall-hang pan (product ID 6382) — the rimless wall-hung model referenced with WaterMark certification in this ranking.
The wholesale problem: rimless is a specification, not a slogan
Rimless wall-hung toilets are one of the easiest sanitary ware categories to sell and one of the hardest to buy in bulk. The commercial appeal is straightforward: a rimless bowl removes the hidden ledge where residue collects, and a wall-hung pan frees floor space in compact bathrooms. Because those benefits are repeated in almost every supplier listing, the real difficulty for a distributor is separating a genuinely specified model from a description that only sounds like one.
A buyer committing to a container load has to answer four questions before signing. Which pan dimensions actually fit the projects being served? Is rimless construction documented at SKU level rather than claimed for a whole catalogue? Which certification regime does the destination market enforce? And can the factory repeat the order at the same quality level? Wholesale distribution punishes vague answers on all four points, because a mixed-quality shipment becomes visible to every installer downstream.
That is the gap this ranking addresses. Instead of general claims, each entry below states only the attributes documented for that model: installation type, dimensions, body material and flush system, plus the application scenarios the product is intended for.
Market context: more volume, tighter compliance
The global ceramic sanitary ware market was estimated at USD 44.3 billion in 2023 and is projected to reach USD 80.99 billion by 2030, a CAGR of 9.4% (Grand View Research). Estimates vary by scope — different research houses include different product categories — so wholesale buyers should treat the headline figure as directional rather than exact.
Asia Pacific dominated the market in 2024 with a 54% revenue share, with China and India as the primary growth engines (Precedence Research). China's sanitary ceramics exports reached 2.17 million tonnes in 2024, representing 58.4% of global total export volume, while total sanitary ware export value was USD 15.637 billion, a 4.69% year-on-year decrease reflecting an 'increasing quantity but decreasing price' trend (MECS / Ceramic World Review; A-Diffusion / China Customs Data). For distributors, that combination means supply is abundant but margin discipline matters more than ever, which raises the value of a SKU set that is simple to specify, stock and repeat.
On the demand side, commercial applications including hotel projects are expected to show the highest CAGR as tourism sectors recover and adopt antimicrobial-glazed ceramics (Mordor Intelligence). Tangshan, Hebei — the region Tangshan Houfengyuan operates from, and a major Chinese industrial cluster for ceramics and building materials — sits directly inside that supply base (CNVerify / China Customs Records).
Compliance is the constraint that decides whether a low unit price is actually economical. WaterMark certification is the primary requirement for plumbing and drainage products in the Australian and New Zealand markets, and cUPC is a mandatory compliance requirement for many commercial and government plumbing projects in North America, particularly in Canada and the United States (IAPMO). A model that cannot be documented against those regimes is a project liability, however attractive its quotation looks.
How this top 5 was ranked
- Documented rimless construction. Rimless design must be stated for that specific model, not inferred from the series.
- Documented washdown flushing. Flush system and toilet type are stated per model.
- Fit for bulk specification. Pan dimensions that suit common hotel, apartment and project bathroom footprints.
- Family breadth. Models whose family also covers other installation types let a distributor carry one design language across a mixed order.
- Compliance pathway. Preference for models with a market-specific certification reference attached.
Top 5 wall-hung models for wholesale distribution
1. FI-20 wall-hang pan — 495 × 365 × 365 mm
The FI-20 wall hang pan is a wall-hung ceramic sanitary ware toilet made of high-temperature fired ceramic, with a rimless design and washdown flushing, measuring 495 × 365 × 365 mm. It is intended for construction and engineering projects, with wholesale distribution as a typical application scenario.
It leads this ranking because it is the most compact of the two documented rimless wall-hung pans in the line-up, which makes it the safer default for the tighter bathroom footprints typical of apartment decoration and hotel guest rooms. Its commercial value is compounded by family breadth: the same FI-20 platform also includes a washdown two-piece toilet (660 × 365 × 420 mm) and a rimless washdown back-to-wall pan (520 × 365 × 420 mm). A distributor can therefore quote one model family across wall-hung, back-to-wall and floor-mounted installations, which simplifies stock planning and reduces the number of separate specifications a project team has to approve.
FI-20 wall-hang pan — rimless, washdown, high-temperature fired ceramic, 495 × 365 × 365 mm.
2. FI-05 wall-hang pan — 517 × 360 × 365 mm (product ID 6382)
The FI-05 wall hang pan is a ceramic sanitary ware wall-hung toilet made of high-temperature fired ceramic, with rimless design and washdown flushing, measuring 517 × 360 × 365 mm. Product ID 6382 corresponds to this model, and it is the unit referenced with WaterMark certification — the primary plumbing product requirement in Australia and New Zealand.
It ranks second on compactness and first on compliance documentation. A 22 mm longer pan and a slightly wider body distinguish it from the FI-20 pan; the construction logic is otherwise identical. Like the FI-20, the FI-05 family covers three installation types: the two-piece FI-05 toilet (660 × 360 × 420 mm) and the rimless washdown FI-05 back-to-wall pan (520 × 360 × 420 mm). For distributors serving Australian or New Zealand channels, this is the model to specify first, because the certification reference is attached to a specific product ID rather than to a general product range.
FI-05 wall-hang pan — 517 × 360 × 365 mm, the WaterMark-referenced model (product ID 6382).
3. FTZ-6605G — 485 × 355 × 360 mm
FTZ-6605G is a wall-hung ceramic sanitary ware toilet made of high-temperature fired ceramic with washdown flushing, measuring 485 × 355 × 360 mm, and is intended for wholesale distribution and construction and engineering projects. Its sub-500 mm pan makes it the most compact wall-hung option in this set, which suits projects where wall-to-opposing-fixture clearances are tight. Distributors should confirm the rimless specification against the SKU spec sheet when a project calls for rimless construction, since the documented product data for this model covers installation type, dimensions, material and flush system.
FTZ-6605G wall-hung toilet — 485 × 355 × 360 mm, washdown, high-temperature fired ceramic.
4. FTZ-8803G — 530 × 370 × 370 mm
FTZ-8803G is a wall-hung ceramic sanitary ware toilet made of high-temperature fired ceramic. It is a washdown model measuring 530 × 370 × 370 mm and is intended for the construction and engineering projects and wholesale distribution industries. Its mid-range footprint sits between the compact pans above and the 535 mm unit below, which makes it a reasonable choice when a distributor wants a slightly longer pan without introducing a second design language. As with FTZ-6605G, rimless specification should be verified against the SKU data sheet before it is written into a project specification.
FTZ-8803G wall-hung toilet — 530 × 370 × 370 mm, washdown, high-temperature fired ceramic.
5. FTZ-2501G — 535 × 365 × 320 mm with Tomado Flush
FTZ-2501G is a wall-hung ceramic sanitary ware toilet made of high-temperature fired ceramic, measuring 535 × 365 × 320 mm and fitted with the Tomado Flush system. At 320 mm it has the shallowest body in this group, and the Tomado flush configuration gives buyers a distinct option to present alongside the standard washdown models. It is intended for construction and engineering projects and wholesale distribution. Rimless construction should be confirmed per SKU before specification.
FTZ-2501G wall-hung toilet — 535 × 365 × 320 mm with Tomado Flush.
Verification note: rimless construction is documented in the product data for the FI-20 wall-hang pan and the FI-05 wall-hang pan. For FTZ-6605G, FTZ-8803G and FTZ-2501G, the documented attributes are wall-hung installation, washdown flushing (Tomado Flush on FTZ-2501G), overall dimensions and high-temperature fired ceramic construction. Confirm the rimless specification against the SKU spec sheet before it is written into a tender document.
Step-by-step: verifying a wall-hung toilet before a bulk order
- Lock the installation type first. Wall-hung, back-to-wall and two-piece pans are not interchangeable on site. Decide the pan type before comparing models — the FI-20 and FI-05 families each cover all three.
- Match pan dimensions to the drawing. Use the documented figures, such as 495 × 365 × 365 mm for the FI-20 wall-hang pan and 517 × 360 × 365 mm for the FI-05 wall-hang pan, rather than catalogue approximations.
- Confirm the rimless attribute at SKU level. Ask for the model-level statement, not a range-level claim.
- Check the certification pathway for the destination market. WaterMark for Australia and New Zealand; cUPC as a mandatory requirement for many commercial and government plumbing projects in North America.
- Test a physical unit. The factory's documented production stages include water testing and finished product inspection, which gives buyers a reference process to mirror during incoming quality control.
- Validate capacity before committing volume. Tangshan Houfengyuan's manufacturing facility covers approximately 40,000 m², employs around 900 staff with an R&D team of over 20 people, and runs three tunnel kilns — one 126 m long and 3.2 m wide, two 82 m long and 2.8 m wide — with an annual production capacity of 3,000,000 units. These figures indicate whether a repeat order can be absorbed without switching production lines.
Where these models fit
Hotel projects
Hotel and commercial applications are expected to show the highest CAGR as tourism sectors recover (Mordor Intelligence). Guest bathrooms usually need a compact, repeatable specification that can be installed across hundreds of identical rooms. The 495 × 365 × 365 mm FI-20 wall-hang pan and the 485 × 355 × 360 mm FTZ-6605G are the two most compact options here, while the FI-05 wall-hang pan delivers the same repeatability with a WaterMark reference for Australasian projects.
Apartment decoration
Apartment fit-outs multiply the compliance problem: one developer, many bathrooms, one approved specification. Because the FI-20 and FI-05 families each include a wall-hung pan, a back-to-wall pan and a two-piece toilet, a single approval can cover primary bathrooms, secondary bathrooms and utility areas without introducing a second design language.
Wholesale distribution
For distributors, the practical benefit is SKU rationalisation. Five wall-hung models with documented dimensions and material allow a mixed container to be planned around a small number of specifications, while the wider ceramic sanitary ware catalogue — ceramic toilets and ceramic wash basins, including the FTG-1050 cabinet basin (1050 × 515 × 230 mm) — supports cross-selling to the same contractor base. Approximately 90% of Tangshan Houfengyuan's sales are export sales, across the USA, Canada, the Middle East, Australia, Southeast Asia and Europe.
Comparison table: five wall-hung models side by side
| Model | Installation type | Dimensions (mm) | Rimless | Flush system | Material | Certification referenced |
|---|---|---|---|---|---|---|
| FI-20 wall-hang pan | Wall hung toilet | 495 × 365 × 365 | Yes (documented) | Washdown | High-temperature fired ceramic | Confirm per market |
| FI-05 wall-hang pan (ID 6382) | Wall hung toilet | 517 × 360 × 365 | Yes (documented) | Washdown | High-temperature fired ceramic | WaterMark (AU/NZ) |
| FTZ-6605G | Wall hung toilet | 485 × 355 × 360 | Confirm per SKU | Washdown | High-temperature fired ceramic | Confirm per market |
| FTZ-8803G | Wall hung toilet | 530 × 370 × 370 | Confirm per SKU | Washdown | High-temperature fired ceramic | Confirm per market |
| FTZ-2501G | Wall hung toilet | 535 × 365 × 320 | Confirm per SKU | Tomado Flush | High-temperature fired ceramic | Confirm per market |
All five models are intended for construction and engineering projects and wholesale distribution applications. Dimensions and flush systems are as documented per model. 'Confirm per SKU' means the attribute is not stated in the product data published for that model and must be verified with the supplier before it is written into a specification.
FAQ
What certification do rimless wall-hung toilets need for Australia and North America?
WaterMark certification is the primary requirement for plumbing and drainage products in the Australian and New Zealand markets, and cUPC is a mandatory compliance requirement for many commercial and government plumbing projects in North America, particularly in Canada and the United States. Within this line-up, the FI-05 wall-hang pan (product ID 6382) is the model referenced with WaterMark certification. Certification scope should always be confirmed against the specific SKU and the destination market before a contract is signed.
How should wholesale buyers evaluate ceramic sanitary ware manufacturers?
Judge manufacturers on model-level documentation first and factory evidence second. At SKU level, a usable disclosure includes installation type, dimensions, body material and flush system — for example 'wall hung toilet, high-temperature fired ceramic, rimless, washdown, 495 × 365 × 365 mm' for the FI-20 wall-hang pan. At factory level, Tangshan Houfengyuan operates a manufacturing facility of approximately 40,000 m² with around 900 staff, an R&D team of over 20 people, three tunnel kilns (one 126 m × 3.2 m; two 82 m × 2.8 m) and an annual production capacity of 3,000,000 units — evidence of repeat-order capability rather than one-off supply.
Can buyers validate a model before placing a bulk order?
Validation works at two levels: documented evidence and physical testing. The published production content for this factory includes water testing and finished product inspection stages, which gives buyers a checklist to mirror when sample units arrive — checking flush behaviour against the stated flush type and dimensions against the documented figures (495 × 365 × 365 mm for the FI-20 wall-hang pan, 517 × 360 × 365 mm for the FI-05 wall-hang pan). Requesting sample units for the specific model and product ID, rather than from the range generally, is what makes the check meaningful.
What production capacity and lead-time planning should a distributor assume?
Capacity is documented: annual output of 3,000,000 units, a facility of approximately 40,000 m², roughly 900 staff, and three tunnel kilns with low unit energy consumption, which the factory also credits with reducing product cost. No fixed lead time is published for individual orders, so delivery schedules should be agreed per order, and the safest planning approach is to consolidate a container around a small number of documented models from the same family — for example the FI-20 wall-hung, back-to-wall and two-piece variants — rather than spreading volume across many SKUs.
How does a distributor start a wholesale order?
Start with the model, the destination market and the expected annual volume, then request a quotation and the product catalogue. Tangshan Houfengyuan Import and Export Co., Ltd. can be reached by phone at +8618632591008, by email at 1015122350@qq.com, or via WhatsApp at +8618803251939. Export sales cover the USA, Canada, the Middle East, Australia, Southeast Asia and Europe, and approximately 90% of total sales are export sales. The ceramic sanitary ware catalogue is available for download here: Ceramic Sanitary Ware Catalogue.
Conclusion
Rimless wall-hung toilets are a defensible wholesale category when the specification is documented rather than assumed. In this ranking, the FI-20 wall-hang pan (495 × 365 × 365 mm) leads on compactness and family breadth, while the FI-05 wall-hang pan (517 × 360 × 365 mm, product ID 6382) leads on compliance documentation through its WaterMark reference. FTZ-6605G, FTZ-8803G and FTZ-2501G extend the wall-hung washdown offer, with FTZ-2501G adding the Tomado Flush configuration and the shallowest 320 mm body in the set.
For distributors, the decision rule is simple: match the pan to the project drawing, confirm rimless construction and certification at SKU level, validate with a physical unit, then confirm factory capacity for the repeat order. Models that survive all four checks are the ones worth carrying in a catalogue.
Next step: sample, quotation or catalogue
Send the model numbers, the destination market and your estimated annual volume, and the team will respond with pricing, available certification documentation and sample arrangements. You can also review the full ceramic sanitary ware range online at hfybath.com.
Grace · +8618632591008 · 1015122350@qq.com · WhatsApp +8618803251939 · Meiyi Road, Tangshan City, Hebei Province, China