🌍 Wenzhou Huafeng Electric Co., Ltd.(HYFF) Since 2011 ⭐ 15+ Year Industry Experience ✓ Verified Elite Supplier
✓ Verified Elite Supplier
Menu

CAT6 Double Data Socket vs HT337 USB A+C Powerpoint: Hotel Desk Comparison

Author: Wenzhou Huafeng Electric Co., Ltd.(HYFF) Release time: 2026-10-14 04:20:08 View number: 37

A hotel or office desk rarely needs only one thing. Some desks need a wired data drop, others need mains power plus USB charging, and a mixed portfolio can carry both on the same schedule. The decision between a CAT6 Double Data Socket and the HT337 10A horizontal double powerpoint with USB A+C (product 7106) comes down to two variables: the function the desk must deliver, and the market the building sits in. The CAT6 Double Data Socket is a flush-mount, CE-certified data outlet supplied under HS code 8536690000 with available colour options. The HT337 is an SAA-certified powerpoint for Australia and New Zealand under certificate SAA-250865-EA, with an approval route running through AS/NZS 3112:2017 Inc A1:2021 and AS/NZS 3100:2022 Inc A1:2023. This comparison shows where each belongs.

Sample room used to validate wall socket and USB powerpoint variants for hotel desk projects

Figure 1 — Sample Room: socket and powerpoint variants are verified against compatible plugs and confirmed specifications before bulk production.

Problem Definition: The Two Questions a Desk Plate Must Answer

Desk-side specification usually lands late in a hotel or office programme. Joinery, room layout and the electrical rough-in are often fixed first, and the plate on the desk is confirmed afterwards — which is exactly when a small decision starts carrying commercial weight.

Two questions decide it:

  1. What does the desk have to deliver? A structured data drop, mains power, USB charging, or a combination of these.
  2. Which market is the building in? The acceptable socket configuration, the approval route and the certificate that applies differ between regions.

Getting the first question wrong creates a trade problem. Structured data cabling and mains wiring are installed by different trades, at different stages, to different rules. A desk specified with a data outlet but no power outlet cannot be rescued by the furniture supplier, and a desk that needs an earthed mains supply cannot be served by a data plate.

Getting the second question wrong creates a compliance problem. A socket that satisfies one market's approval route is not automatically acceptable in another, and the certificates behind a product are attached to specific standards and specific market scopes.

The third consequence is the quiet one: in a hotel portfolio, the desk plate is not ordered once. It is ordered again for every property, every refurbishment phase and every re-order cycle. That is why this decision is best handled as an approved specification rather than a one-off purchase.

Industry Background: A Mature Market with Two Fast-Moving Edges

The categories behind this comparison are large and stable. The global market for electric plugs and sockets was valued at USD 14.13 billion in 2025 (Precedence Research). Global production of wall sockets reached over 3.1 billion units in 2024, with China leading as the top producer (Market Research Report).

Within that market, two shifts matter for hotel and office desks. Modular sockets accounted for 43% of total wall socket sales in 2024, reflecting demand for space-saving and customised outlet arrangements (Fortune Business Insights). Charging demand is moving faster still: the global smart plug market is estimated to reach USD 5.29 billion by 2026, growing at a CAGR of 25.70% from 2026 to 2031 (Mordor Intelligence), and EU regulations mandate USB-C as the common charging standard for most portable electronics, driving demand for USB-C wall sockets (Omdia).

The standards framework around all of this is regional, not global:

  • IEC 60884-1:2022 provides the general requirements for plugs and socket-outlets for household and similar purposes, limited to 16 A for screwless terminals (IECEE).
  • AS/NZS 3112 is the mandatory standard for electrical wall sockets in Australia and New Zealand and defines the Type I plug configuration (Standards Australia / SAA Approvals).
  • CEE 7/3 (Schuko) standardises Type F sockets for 16 A / 250 V applications in many European countries (World Standards).
  • IEC 60529 defines the IP44 and IP54 ingress protection ratings applied to bathroom and outdoor sockets (IEC).

For desk specification, this means the same furniture drawing can require two different products depending on where it is installed — which is why the CAT6 Double Data Socket and the HT337 are complements rather than substitutes.

The Two Options: What Each Product Actually Delivers

CAT6 Double Data Socket: a flush-mount data termination point

The CAT6 Double Data Socket is a flush-mount outlet built to terminate CAT6 data cabling at the desk. Its flush-mount design keeps the plate level with the mounting surface, which matters on guest desks and executive workstations where a protruding connector housing is not acceptable.

  • CAT6 specification — the socket is designed for CAT6 structured data runs, the cabling format used for desk-side workstations, IP telephones, IPTV positions and access points.
  • CE certification — the socket carries CE certification, the marking route used for EU-facing projects.
  • HS code 8536690000 — the customs classification recorded for the socket in export documentation, which matters when a distributor or contractor needs the classification in advance for clearance planning.
  • Available colour options — the socket is offered in available colour options so the desk plate can be matched to the room scheme; the specific colour selection is confirmed on the order.

What it does not do is equally important. The CAT6 Double Data Socket carries no mains power and no USB charging. It is a data device, and it belongs on the desk only where a wired data drop is genuinely required.

Comparison of wiring methods for earthed wall sockets and data terminations

Figure 2 — Comparison of wiring methods: grounding continuity and terminal configuration differ between socket types and must be matched to the circuit at the desk.

HT337 (product 7106): a 10A horizontal double powerpoint with USB A+C

The HT337 is a 10A horizontal double powerpoint with USB-A and USB-C charging ports on the same plate, supplied as product 7106. It is built for the Australia and New Zealand market, where it holds SAA certification under certificate SAA-250865-EA.

The standards that define its approval route are specific:

  • AS/NZS 3112:2017 Inc A1:2021 — the standard that defines the Type I plug and socket configuration mandatory for Australia and New Zealand. The mains outlets of the HT337 sit inside this configuration.
  • AS/NZS 3100:2022 Inc A1:2023 — the general approval and test requirements for electrical equipment that apply alongside the configuration standard.

Functionally, the HT337 answers a different desk problem from the data socket: it supplies mains power and adds USB-A and USB-C charging on the same plate, so a guest or employee can charge a phone or laptop without a mains adapter occupying one of the two outlets.

The risks this class of product has to control are well understood: electrical overload, loose wiring, poor contact between plug and socket, grounding failure or prolonged high-power use may cause overheating, electrical arcing, electric shock or damage to the wall socket. The control method combines socket contact, terminal and grounding design, copper components suitable for the rated current, flame-retardant materials, and testing that covers temperature rise, insertion life, grounding continuity, dielectric strength, insulation and electrical load. In production, that is supported by inspection of socket contact retention force, copper thickness, wiring terminals, grounding structures and plastic materials, with raw-material inspection, assembly inspection and finished-product sampling carried out during production.

Laboratory testing of wall socket contact, temperature rise and insertion life

Figure 3 — Laboratory: temperature-rise, insertion-life, grounding-continuity, dielectric-strength, insulation and electrical-load testing form part of the socket control plan.

Where the market and function differences actually sit

Three differences separate these two products, and none of them is a question of quality:

  • Function. Data termination versus mains power plus USB charging.
  • Approval route. CE certification for the data socket on EU-facing projects, versus SAA certification for the HT337 under certificate SAA-250865-EA for Australia and New Zealand.
  • Compliance reference. The data socket's market route is CE; the HT337's route is defined by AS/NZS 3112:2017 Inc A1:2021 and AS/NZS 3100:2022 Inc A1:2023.

On a European desk, the power half of a mixed desk plate is normally served by a Schuko (Type F) outlet standardised under CEE 7/3 for 16 A / 250 V applications, while the data half is served by a CAT6 data outlet such as the CAT6 Double Data Socket. On an Australian or New Zealand desk, the power half is served by a Type I configuration product such as the HT337, and the data half follows the same logic as anywhere else: a structured data outlet, specified separately.

Step-by-Step: How to Decide on a Desk Schedule

  1. Define the desk function first. List what the desk must support: a wired network device, a telephone, a display, a guest laptop, a phone charger, or a combination. Function, not appearance, decides whether a data outlet, a power outlet or both go on the plate.
  2. Confirm the destination market. Australia and New Zealand point to AS/NZS 3112:2017 Inc A1:2021 and AS/NZS 3100:2022 Inc A1:2023 and to an SAA-certified product such as the HT337. EU-facing projects point to the CE route, which is where the CAT6 Double Data Socket sits.
  3. Match the plate to the circuit. A data socket terminates CAT6 cabling; a powerpoint connects to a mains circuit. If only one circuit is available at the desk, only one of the two products can be installed there.
  4. Check the approval document early. For the HT337, the certificate reference is SAA-250865-EA. For the data socket, the CE certification route applies and the export classification is HS code 8536690000 — better confirmed before freight booking than after.
  5. Confirm outlet count and charging demand. Use a double powerpoint with USB A+C where two mains devices and two charging devices are expected on a single guest desk. Use a double data socket where two data runs are needed at the same position.
  6. Validate samples against real plugs. Samples should be verified with compatible plugs and functional testing before mass production, so that insertion feel, contact quality and configuration are confirmed rather than assumed.
  7. Fix the approved sample and acceptance criteria. Once the sample is approved it becomes the reference for pre-shipment inspection, which is what keeps the second property identical to the first approval.

Use Cases: Where Each Product Belongs

1. ANZ hotel guest desks

Specify the HT337 (product 7106) where the property is in Australia or New Zealand and the desk must supply mains power plus USB-A and USB-C charging. The SAA certification under certificate SAA-250865-EA and the AS/NZS standards route keep the specification inside the local approval framework.

2. EU-facing office desks with wired workstations

Specify the CAT6 Double Data Socket where the desk terminates a CAT6 data run for a fixed workstation, IP phone or display position, and where the flush-mount plate has to sit cleanly against the desk or wall surface. CE certification and the available colour options allow the outlet to be matched to the interior specification.

3. Mixed desks in mixed portfolios

Where a portfolio spans regions, both products belong on the same approved list — not on the same plate. The data socket handles the data drop, the powerpoint handles power and charging, and each is specified to the market it is installed in.

4. Distributor stock programmes

For a distributor, the practical question is not which product is better, but which two SKUs cover the most desk specifications in the territory and whether the manufacturer can repeat the approved specification on re-order. That is the point at which a product comparison becomes a supply relationship.

CAT6 Double Data Socket vs HT337: Side-by-Side

Decision factorCAT6 Double Data SocketHT337 (product 7106) 10A horizontal double powerpoint with USB A+C
Primary functionTerminates CAT6 structured data cabling at the deskSupplies mains power and adds USB-A and USB-C charging on the same plate
FormatFlush-mount design; available colour options, selection confirmed on the order10A horizontal double powerpoint with USB A+C
CertificationCE certifiedSAA certification for Australia & New Zealand under certificate SAA-250865-EA
Market standard referenceCE route for EU-facing projectsAS/NZS 3112:2017 Inc A1:2021 and AS/NZS 3100:2022 Inc A1:2023
Installation inputCAT6 data cablingMains circuit, installed to the wiring rules of the destination market
Export documentationHS code 8536690000Certificate reference SAA-250865-EA for the ANZ approval
Best specified whenA wired data drop is required at the deskGuest or staff need power plus charging at the desk

The table also explains why the two products are not in competition. A hotel desk in Auckland that needs a network point and two mains outlets has two specification lines, two approval references and two products — not one compromised product.

Holding the Decision Together Across a Portfolio

Where a specification is repeated across properties, the manufacturer behind it becomes part of the decision — not because of marketing, but because a repeated specification depends on process discipline.

Wenzhou Huafeng Electric Co., Ltd. (HYFF) is a manufacturer of wall switches and wall sockets founded in 2011, operating a 7,000 m² factory with 118 employees, a 10-engineer R&D team and an annual output of 35,000,000 units. The company operates as a manufacturer with ISO quality control systems and implements strict quality control measures across production, including incoming material inspection, plastic parts inspection, process inspection, glowing filament testing, silver layer thickness inspection, performance life testing, plastic ball pressure testing, switch and socket on-off testing and doorbell testing, within a quality control system that runs from raw materials to finished products. Its products are exported to markets across Europe, America, the Middle East, Africa and other regions. CE and CB certifications issued by BV and Intertek are recorded for its wall switches and sockets.

For an EU distributor building a long-term range, that translates into a practical checklist: does the supplier operate a documented quality system, can it repeat an approved sample on re-order, does it have engineering capacity to answer specification questions, and are the commercial terms workable for stock holding? On the last point, purchasing terms are MOQ 1,000 units, delivery on EXW / FOB / CIF, acceptance based on pre-shipment inspection against approved samples and confirmed specifications, and payment at 100% TT in advance.

Automation workshop producing wall sockets for repeat hotel supply programmes

Figure 4 — Automation Workshop: production consistency supports repeat orders across a hotel or office portfolio.

Frequently Asked Questions

Which certification applies to each socket in a hotel desk project?

The CAT6 Double Data Socket is CE certified. The HT337 (product 7106) holds SAA certification for Australia and New Zealand under certificate SAA-250865-EA, with its approval route defined by AS/NZS 3112:2017 Inc A1:2021 for the Type I configuration and AS/NZS 3100:2022 Inc A1:2023 for general approval and test requirements. The certificate that applies is determined by the destination market of the building, not by the desk design.

How are overheating and loose-contact risks controlled in production?

Risks such as electrical overload, loose wiring, poor contact between plug and socket, grounding failure or prolonged high-power use are controlled through proper socket contact, terminal and grounding design, copper components suitable for the rated current, flame-retardant materials, and temperature-rise, insertion-life, grounding-continuity, dielectric-strength, insulation and electrical-load testing. Socket contact retention force, copper thickness, wiring terminals, grounding structures and plastic materials are inspected, and raw-material inspection, assembly inspection and finished-product sampling are carried out during production.

What are the purchasing terms and acceptance criteria?

MOQ is 1,000 units. Delivery terms are EXW, FOB or CIF. Acceptance criteria are based on pre-shipment inspection against approved samples and confirmed specifications. Payment terms are 100% TT in advance.

How is a sample validated before a rollout?

Before mass production, samples are verified with compatible plugs and functional testing. The approved sample then becomes the reference for pre-shipment inspection alongside the confirmed specifications, so that repeat orders match the original approval.

How can an EU distributor qualify a long-term wall socket supplier?

Look at three things: the quality system, the engineering depth, and the ability to repeat an approved specification. Wenzhou Huafeng Electric Co., Ltd. (HYFF) operates as a manufacturer with ISO quality control systems, was founded in 2011, runs a 7,000 m² factory with 118 employees and a 10-engineer R&D team, and produces an annual output of 35,000,000 units with exports to European and other international markets. To start a qualification file, request samples and a quotation against your desk schedule, and match the approved sample to the acceptance criteria before the first bulk order.

Conclusion: Two Products, One Desk Standard

The CAT6 Double Data Socket and the HT337 answer different halves of the same desk requirement. The data socket is a flush-mount, CE-certified CAT6 termination supplied under HS code 8536690000 with available colour options, and it belongs where a wired data drop is part of the desk function. The HT337 (product 7106) is a 10A horizontal double powerpoint with USB A+C, SAA certified for Australia and New Zealand under certificate SAA-250865-EA and specified against AS/NZS 3112:2017 Inc A1:2021 and AS/NZS 3100:2022 Inc A1:2023, and it belongs where the desk must deliver mains power plus charging in the ANZ market.

Where both functions are needed, the answer is not to choose one product over the other, but to hold both on the approved list, each against the market and the circuit it was approved for.

Wenzhou Huafeng Electric Co., Ltd. manufacturing site for wall switch and wall socket supply programmes

Next step: samples, quotation and catalogue

Send your desk schedule, destination market and required outlet mix, and HYFF will confirm the applicable product, certificate and colour options, then arrange samples for validation before production.

Contact: leona | Tel: +86 0577 86911198 | WhatsApp: +86 13989758126 | Email: service@vgshmn.com | Address: No.3 Kaiyuan Road, Zhuangyuan, Longwan, Wenzhou, Zhejiang

Website: www.hyffelectric.com  |  Catalogue: HYFF 2026 product catalogue (PDF)

Have Questions or Need More Details?

Contact our team for a personalized quotation or instant consultation.

Request a Quotation

Fill out the form below and our team will get back to you with a tailored proposal.

Attach images, files, or documents.

We'll respond within 24 hours (Mon–Sat).

WhatsApp Direct Chat

Prefer to chat in real-time? Message us on WhatsApp for instant assistance & quick answers.

  • Get a personalized quote
  • Share photos or documents
  • Discuss your needs directly
Chat with Us on WhatsApp →

Typically replies in 5–30 minutes during business hours.

Support: Images, videos, PDF