{{ variable.name }}
A high-side pressure setting of the GCU30G integrated airend, delivered for compressed-air foam systems working at 8.6-12 bar and for heavy commercial vehicle braking circuits operating between 8 and 12 bar.

12.5 bar configuration of the GCU30G integrated airend
Some vehicle systems need headroom above the usual 7 bar duty point. Compressed-air foam fire trucks proportion foam between 8.6 and 12 bar, and heavy truck braking circuits run between 8 and 12 bar. This GCU30G build is set for a maximum working pressure of 12.5 bar, leaving a margin above both requirements while the unit still delivers 2.5-3.3 m³/min at the 7 bar reference point from an 18-22 kW input. Speed range is 2,900-6,000 rpm, maximum discharge temperature 105 °C, oil carry-over below 2 ppm (design 3 ppm) and noise 75 dB(A) or less. The nine-in-one layout - airend, oil-gas separator tank, three filters and four valves - keeps the high-pressure side compact, which matters on a fire body where locker space is already committed.
| Model | GCU30G (12.5 bar configuration) |
|---|---|
| Type | Integrated screw airend with gearbox; PTO / engine driven |
| Maximum working pressure | 12.5 bar (minimum 5 bar) |
| Rated power | 18-22 kW |
| Speed | 2,900-6,000 rpm |
| Free air delivery at 7 bar | 2.5-3.3 m³/min |
| Max discharge temperature | 105 °C |
| Oil carry-over | Below 2 ppm (design 3 ppm or less) |
| Noise level | 75 dB(A) or less |
| Net weight | 96 kg |
| Dimensions (L x W x H) | 560 x 490 x 580 mm, excluding air filter assembly |
| Integrated configuration | 9-in-1: airend + oil-gas separator tank + 3 filters + 4 valves |

Valve group and separator tank arranged for the 12.5 bar working range
Compressed air supply for foam proportioning systems working at 8.6-12 bar, with fast air build-up after standby.
Braking circuits running between 8 and 12 bar, plus clutch and gearbox assist and pneumatic horn.
Engineering rescue trucks and municipal bodies needing a compact high-pressure air source.
Core compression unit for packages specified above the usual 7 bar duty point.
The pressure point is fixed at order, with the safety valve and minimum pressure valve matched to the application: foam proportioning at 8.6-12 bar, braking at 8-12 bar, or another point inside the 5-12.5 bar band. Body builders can specify the air filter as an option, and technical drawings with standardised mounting interfaces are issued for chassis integration. Altitude and wide-temperature adaptations are available on the same platform where the vehicle operates in extreme environments.
12.5 bar, with a 5 bar minimum. The 2.5-3.3 m³/min figure is stated at the 7 bar reference point, so confirm the expected delivery at your actual foam or brake pressure with our engineers.
The 12.5 bar maximum sits above the 8.6-12 bar range used by compressed-air foam systems, and the compact nine-in-one layout leaves locker space free on the body.
The minimum pressure valve and integrated separator tank are specified to support fast air build-up for standby-then-full-load duty; the actual ramp time depends on the receiver volume of the vehicle system.
No. The unit remains a gearbox-integrated airend for PTO and engine-driven systems, rated 18-22 kW with a 2,900-6,000 rpm speed range.
CE certificate CE-WSD-GCU-2023-001 issued by TUV Rheinland under MD 2006/42/EC, EN 1012-1, EN 60204-1 and EN ISO 1217 for integrated airends from 2.2 to 45 kW, plus ISO 9001:2015 by SGS and IATF 16949 automotive quality management system certification.
Yes. The three filters and four valves are grouped on the integrated assembly, so filter replacement and valve checks are carried out at one location rather than across separate manifolds.
Send the working pressure of your foam or brake system, the air volume needed at that pressure and the drive arrangement, and we will confirm the 12.5 bar configuration of the GCU30G.
Email: service@woyo.cn · Tel: +86 510 8599 6655 · WhatsApp: +86 189 1237 9878 · Address: No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China