{{ variable.name }}
Sealed integrated housing for narrow underframes, 75 dB(A) or lower noise, 12.5 bar maximum working pressure and oil carry-over below 2 ppm.
Metro, light rail and EMU air systems run continuously under high vibration, tunnel dust, frequent start-stop cycling and ambient temperatures from -25 C to 45 C. This integrated screw air compressor is built on an anti-vibration integrated structure with noise held to 75 dB(A) or lower and a sealed integrated housing that fits narrow underframe spaces. Air is supplied for the brake pipe, pantograph assist and air suspension at up to 12.5 bar, with oil carry-over below 2 ppm so brake valves and air dryers downstream are protected. Power is 2.2-4 kW with 0.25-0.4 m3/min free air delivery at 7 bar, and the complete 9-in-1 assembly - airend, oil-gas separator tank with built-in coarse separator, three filters and four valves - measures 410 x 330 x 310 mm and weighs 45 kg.
Designed for continuous rail duty with high vibration, as applied in EMU and metro train braking and auxiliary air supply.
Low noise output supports tunnel and station noise requirements over long continuous operating periods.
Compact sealed layout fits narrow underframe spaces and shields the assembly from tunnel dust.
Design limit 3 ppm, keeping brake control units and air dryers clean over long maintenance intervals.
Matched to rail working conditions with frequent start-stop and continuous duty.
Reliability figure reported in the EMU and metro train air supply programme.
| Power | 2.2-4 kW |
|---|---|
| Speed | 3500 rpm |
| Free air delivery at 7 bar | 0.25-0.4 m3/min |
| Working pressure | Maximum 12.5 bar / minimum 5 bar |
| Maximum discharge temperature | 105 C |
| Oil carry-over | Below 2 ppm (design limit 3 ppm) |
| Noise | 75 dB(A) or lower |
| Net weight | 45 kg |
| Dimensions (L x W x H, excl. air filter assembly) | 410 x 330 x 310 mm |
| Rail configuration | Anti-vibration integrated structure, sealed integrated housing, -25 C to 45 C working condition |
| Reliability | MTBF up to 30,000 h reported in the EMU and metro programme |
| Configuration | 9-in-1: screw airend + oil-gas separator tank (built-in coarse separator) + 3 filters + 4 valves |
| Motor options | 24 V DC / 540 V DC |
| Housing material | High-grade cast iron (aluminium-alloy housing under development) |
Brake pipe air supply, pantograph assist and air suspension for EMU, metro, light rail and freight trains, working with an air dryer, main reservoir and brake control unit. The same rail-oriented platform also serves locomotives, special vehicles and new energy commercial vehicles with demanding vibration and noise limits.
Rail configurations are set against underframe space, vibration isolation requirements, brake system pressure and maintenance interval. Motor voltage is selected per platform (24 V DC or 540 V DC), the air filter is optional, and standardised mounting interfaces plus batch consistency support fleet retrofit programmes.
Metro operator (Wuxi Metro): approximately 120 units in service over four years for metro train brake and air suspension air supply. Reported result: zero oil-emulsification or leakage failure since commissioning, with maintenance limited to filter replacement; the compact size fits the narrow underframe of the sealed integrated housing.
Rolling stock OEM (CRRC class): approximately 400 units per year over five years for EMU and metro train braking and auxiliary air supply, with localised replacement of imported airends and total cost reduced by over 30%, stable air supply under high vibration, an anti-vibration integrated structure, low noise and MTBF up to 30,000 h.
The 9-in-1 assembly measures 410 x 330 x 310 mm excluding the air filter assembly and weighs 45 kg, and the sealed integrated housing was specified for narrow underframe installation at Wuxi Metro.
The rail configuration uses an anti-vibration integrated structure, applied in the EMU and metro train air supply programme under continuous high vibration.
75 dB(A) or lower.
At Wuxi Metro, maintenance has been limited to filter replacement, with zero oil-emulsification or leakage failure since commissioning across approximately 120 units over four years.
Rail working conditions from -25 C to 45 C with frequent start-stop and continuous duty.
Rail transit product certification for air supply units on locomotives, EMU, metro and freight trains, plus CE under TUV Rheinland (CE-WSD-GCU-2023-001), IATF 16949 and ISO 9001:2015 by SGS.
Free air delivery of 0.25-0.4 m3/min at 7 bar, minimum 5 bar and maximum 12.5 bar working pressure, and a maximum discharge temperature of 105 C.
Supplier: Wuxi Woyo Superdo Compressor Co., Ltd. (WOLXAIR), founded 1996, 20,000 m2 facility, 12,000 units annual output, 35 engineers.
Email: service@woyo.cn | Tel: +86 510 8599 6655 | WhatsApp: +86 189 1237 9878
Address: No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China
Provide your vehicle type, underframe envelope, brake system pressure and vibration requirements so the rail configuration can be confirmed.