{{ variable.name }}
The GCU13 packs a screw airend, oil-gas separator tank, three filter positions and four valves into one 44 kg assembly of 375 x 353 x 470 mm, excluding the air filter. It delivers 0.9-1.6 m³/min at 7 bar from a 7-15 kW drive.
The GCU13 is a higher-flow integrated screw compressor airend for vehicle-mounted and cabinet-free air supply systems. Its 9-in-1 architecture joins the compression unit to an oil-gas separator tank with a built-in coarse separator, three filter positions (external fine oil separator, oil filter, optional air filter) and four valves: intake control valve, minimum pressure valve, thermostat valve and safety valve. OEMs install one assembly instead of plumbing nine components, which removes joints and leak paths on the line side.
Working pressure covers 5 to 12.5 bar. Speed runs 2900-6500 rpm at 7-15 kW, maximum discharge temperature is 105 °C, and oil carry-over stays below 2 ppm against a 3 ppm design limit.
Airend, separator tank, three filter positions and four valves ship as one unit, cutting component count and line-side assembly steps.
0.9-1.6 m³/min free air delivery at 7 bar from a 44 kg unit measuring 375 x 353 x 470 mm excluding the air filter assembly.
2900-6500 rpm operating speed lets one airend model serve different drive and gearing layouts.
Forged alloy steel rotors with the German-designed UV patented profile, 20+ machining steps and micron-level accuracy, on SKF heavy-duty rolling bearings with triple shaft sealing.
Under 2 ppm in operation against a 3 ppm design limit, supported by a built-in coarse separator plus an oversized external fine separator.
105 °C maximum discharge temperature and 75 dB(A) or lower sound level for chassis-mounted installation.
| Model | GCU13 |
|---|---|
| Type | Higher-flow integrated screw compressor airend |
| Drive power | 7-15 kW |
| Speed | 2900-6500 rpm |
| Free air delivery at 7 bar | 0.9-1.6 m³/min |
| Working pressure, max / min | 12.5 / 5 bar |
| Max discharge temperature | 105 °C |
| Oil carry-over | Under 2 ppm (design limit 3 ppm) |
| Noise | 75 dB(A) or lower |
| Net weight | 44 kg |
| Dimensions (L x W x H) | 375 x 353 x 470 mm, excluding air filter assembly |
| Housing | High-grade cast iron (aluminium-alloy housing under development) |
| Rotor and bearing set | Forged alloy steel, German-designed UV patented profile; SKF heavy-duty rolling bearings |
| Configuration | 9-in-1: airend + oil-gas separator tank + 3 filters + 4 valves |
The GCU13 is supplied as the 9-in-1 integrated unit or as a conventional screw airend architecture from the same source. The air filter remains optional as the third filter position, motor options include 24 V and 540 V for electric-drive systems, and an aluminium-alloy housing is under development. A high-pressure variant up to 30 bar is under evaluation and not yet released.
9-in-1 integratedConventional airendOptional air filter24 V / 540 V motors
The housing is high-grade cast iron. Rotors are forged alloy steel, ground to the German-designed UV patented profile through 20+ precision machining steps at micron-level accuracy, and run in SKF heavy-duty rolling bearings behind a triple-sealing shaft seal. Separation combines the tank-mounted built-in coarse separator with an oversized external fine separator, which keeps carry-over stable when the machine cycles.

OEM supply covers standardised mounting interfaces and technical drawings for assemblers, either architecture from one supplier, optional air filtration and motor voltage selection. Joint development is available for vehicle programmes that need modified intake, sealing or control arrangements.
An air compressor assembler building complete units has used the GCU13 as the core airend for stationary and vehicle packages at roughly 300 units per year over two years. Standardised mounting interfaces and stable batch quality reduced assembly time and rework, and both the conventional and the 9-in-1 integrated architecture were sourced from the same supplier.
One assembly contains the screw airend, the oil-gas separator tank with built-in coarse separator, three filter positions (external fine oil separator, oil filter, optional air filter) and four valves: intake control, minimum pressure, thermostat and safety.
0.9-1.6 m³/min across the 7-15 kW and 2900-6500 rpm range. Confirm your duty point with our engineers so the selected speed and power match the required free air delivery.
Working pressure runs from 5 bar to 12.5 bar, which is why it is described as a 12.5 bar-class airend.
Oil carry-over is under 2 ppm in operation, with a design limit of 3 ppm, using a built-in coarse separator and an oversized external fine separator.
Yes. Complete-unit OEMs use the GCU13 both for stationary packages and for vehicle-mounted air systems.
CE certificate CE-WSD-GCU-2023-001 issued by TUV Rheinland under MD 2006/42/EC, EN 1012-1, EN 60204-1 and EN ISO 1217 for integrated airends and vehicle-mounted compressors of 2.2-45 kW; ISO 9001:2015 certified by SGS; IATF 16949:2016 for automotive supply.
Overseas sales team: service@woyo.cn | Tel +86 510 8599 6655 | WhatsApp +86 189 1237 9878
Wuxi Woyo Superdo Compressor Co., Ltd., No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China
Send your required flow, working pressure, drive power and mounting envelope to receive the matching GCU13 configuration and drawings.
SEO Title: Compact 9-in-1 Integrated Screw Compressor Airend 7-15 kW
Meta Description: GCU13 9-in-1 integrated screw compressor airend for vehicle air systems: 7-15 kW, 0.9-1.6 m³/min at 7 bar, under 2 ppm oil carry-over, CE/ISO 9001 certified.
URL Slug: gcu13-9-in-1-integrated-screw-compressor-airend
H1: Compact 9-in-1 Integrated Screw Compressor Airend 7-15 kW
Primary terms: integrated screw compressor airend, screw air compressor block, vehicle-mounted screw air compressor