What protects the airend from mine dust?
A sealed high-grade cast iron housing with an integrated structure and a dust-proof intake arrangement, normally combined with the machine’s multi-stage air filter.
{{ variable.name }}
GCU33 integrated screw airend for rock drilling rigs, mining jumbos, anchor drill rigs and mining trucks — sealed housing, altitude intake port, 5–12.5 bar.
SEO TitleGCU33 Dust-Proof Sealed Screw Airend for Mining Truck and Drill Rig Air Supply
Meta DescriptionGCU33 screw airend for mining trucks and drill rigs: sealed cast iron housing, altitude intake port, 5–12.5 bar, 2.3–3.9 m³/min, oil carry-over under 2 ppm.
URL Slug/products/gcu33-screw-airend-mining-vehicles
H1Dust-Proof Sealed Screw Airend for Mining Truck and Drill Rig Air Supply
Mining duty exposes an airend to high dust concentration, underground humidity, altitude up to 5,000 m and near-continuous operation. The GCU33 is supplied for that environment as an integrated screw airend with a sealed cast iron housing, dust-proof intake arrangement and an altitude oxygen compensation intake port, delivering 2.3–3.9 m³/min at 7 bar within a 5–12.5 bar range at 15–30 kW and 3100–6000 rpm.
The 9-in-1 configuration includes the screw airend, an oil-gas separator tank with built-in coarse separator, three filters and four valves in one assembly, so a mining vehicle builder or drill rig manufacturer installs a single pressure-ready unit. Net weight is 74 kg with a 477 × 438 × 633 mm envelope excluding the air filter assembly, and noise is held at or below 75 dB(A).


A high-grade cast iron housing with a sealed integrated structure limits dust ingress in high-dust and high-humidity underground or open-pit sites.
An altitude oxygen compensation intake port is specified for thin-air sites, matching project work carried out above 4,000 m.
Patented method for preventing oil emulsification in vehicle screw air compressors (ZL2025 1 1888313X) addresses humid underground air.
Built-in coarse separator plus oversized external fine separator, with triple shaft sealing, holds oil carry-over below 2 ppm (design ≤3 ppm).
Forged alloy steel rotors on a German-designed UV patented profile, machined through 20+ precision steps, running in SKF heavy-duty rolling bearings.
5–12.5 bar and 2.3–3.9 m³/min at 7 bar cover pneumatic power for rock drills, truck unloading and braking from one unit.
| Model | GCU33 |
|---|---|
| Type | Wide-range integrated screw airend; vehicle / general purpose |
| Power | 15–30 kW |
| Speed | 3100–6000 rpm |
| FAD at 7 bar | 2.3–3.9 m³/min |
| Working pressure | 5–12.5 bar (max. 12.5 bar / min. 5 bar) |
| Max. discharge temperature | 105 °C |
| Oil carry-over | <2 ppm (design ≤3 ppm) |
| Noise | ≤75 dB(A) |
| Net weight | 74 kg |
| Dimensions (L×W×H) | 477 × 438 × 633 mm, excluding air filter assembly |
| Integrated configuration | 9-in-1: screw airend + oil-gas separator tank (built-in coarse separator) + 3 filters (external fine oil separator, oil filter, air filter optional) + 4 valves (intake control valve, minimum pressure valve, thermostat valve, safety valve) |
| Housing | High-grade cast iron, sealed integrated structure (aluminium-alloy housing under development) |
| Environment measures | Dust-proof intake, altitude oxygen compensation intake port, patented anti-oil-emulsification design |
| Compliance | CE (TUV Rheinland, CE-WSD-GCU-2023-001, valid to 2028-06-14); ISO 9001:2015; IATF 16949:2016 |
The rotors are forged in alloy steel and ground to a German-designed UV patented profile (patent ZL2012 1 0087353.0) over more than 20 machining steps, running in SKF heavy-duty rolling bearings behind a triple-sealing shaft arrangement. Lubricating oil is separated first in the built-in coarse separator inside the oil-gas tank and then in the oversized external fine separator. The sealed high-grade cast iron housing surrounds the airend and the factory-fitted valve group, which keeps intake control, minimum pressure, thermostat regulation and safety protection inside one protected envelope and limits exposure to dust and humidity.
Specified for mining engineering vehicles and drilling equipment operating in high dust, humidity and altitude.
Intake and filtration arrangement, altitude compensation configuration, mounting interface and the choice between conventional and 9-in-1 architecture are agreed per machine programme, with technical drawings supplied. Where the site altitude or duty cycle falls outside the published envelope, the requirement is handled as a joint development request rather than a catalogue option.
Approx. 250 units per year over 2 years for rock drilling rig, mining jumbo and anchor drill rig pneumatic power. Reported result: stable operation in high-dust and high-humidity underground and open-pit sites. Highlights: dust-proof intake, sealed housing, patented anti-oil-emulsification design.
Approx. 150 units per year for mining truck braking, unloading and tyre inflation air supply. Reported result: a jointly developed mining-dedicated unit with reliable air output at high altitude. Highlights: altitude adaptation above 4,000 m.
A sealed high-grade cast iron housing with an integrated structure and a dust-proof intake arrangement, normally combined with the machine’s multi-stage air filter.
An altitude oxygen compensation intake port is part of the mining specification, and project work above 4,000 m is referenced in customer programmes.
2.3–3.9 m³/min FAD at 7 bar across a 5–12.5 bar working range, at 15–30 kW and 3100–6000 rpm, with 105 °C maximum discharge temperature.
The vehicle screw air compressor anti-oil-emulsification method is patented (ZL2025 1 1888313X), and the thermostat valve regulates oil temperature in circuit.
Oil carry-over is below 2 ppm against a design limit of 3 ppm; noise is rated at or below 75 dB(A).
The three filters and four valves are part of the integrated assembly, and the external fine oil separator is oversized for service interval planning on site.
Wuxi Woyo Superdo Compressor Co., Ltd. (brand WOLXAIR), founded 1996, 20,000 m² facility, 120+ staff, 12,000 units annual output.
Email: service@woyo.cn · Tel: +86 510 8599 6655 · WhatsApp / Mobile: +86 189 1237 9878
Address: No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China · www.woyocomp.com
Please state machine type, site altitude, required pressure and FAD, and annual volume so the mining configuration can be quoted. MOQ, price and delivery are confirmed per configuration.