{{ variable.name }}
Air supply unit for locomotive, EMU, metro and light rail braking and auxiliary circuits, with an anti-vibration integrated structure and sealed 9-in-1 housing.

GCU30 rail transit configuration — sealed integrated assembly for underframe installation
The GCU30 rail transit version supplies braking and auxiliary air on locomotives, EMU, metro and light rail vehicles. It pairs the 18-22 kW screw airend, delivering 2.5-3.3 m³/min at 7 bar across a 5-12.5 bar working range, with an anti-vibration integrated structure and a noise level of ≤75 dB(A). The configuration is intended for continuous duty in high-vibration, tunnel-dust conditions between -25 °C and 45 °C, with reported MTBF of up to 30,000 hours, and the sealed 9-in-1 housing fits narrow underframe space.
| Model | GCU30, rail transit configuration |
|---|---|
| Function | Brake pipe air supply, pantograph assist and auxiliary air supply |
| Duty | Continuous duty with automatic pressure regulation |
| Ambient working range | -25 °C to 45 °C |
| Drive power | 18-22 kW |
| Speed | 2,900-6,000 rpm |
| Free air delivery | 2.5-3.3 m³/min at 7 bar |
| Working pressure | Max. 12.5 bar / min. 5 bar |
| Noise level | ≤75 dB(A) |
| Reported MTBF | Up to 30,000 hours |
| Oil carry-over | Below 2 ppm (design ≤3 ppm) |
| Max. discharge temperature | 105 °C |
| Net weight | 96 kg |
| Dimensions (L×W×H) | 560 × 490 × 580 mm, excluding air filter assembly |
| Housing and rotors | High-grade cast iron housing; forged alloy steel rotors, UV patented profile |
| Bearings and seal | SKF heavy-duty rolling bearings; triple-sealing technology |
The rail configuration is built on the standard 9-in-1 architecture with anti-vibration mounting and a sealed housing. Pressure setting and mounting interfaces follow the vehicle drawing, and the air filter is optional. Both conventional and 9-in-1 architectures can be supplied from the same factory, which helps when a fleet mixes older and newer vehicles.

Sealed integrated housing with separator tank and four control valves on one base
High-grade cast iron housing with forged alloy steel rotors machined to a German-designed UV patented profile over more than 20 precision steps. SKF heavy-duty rolling bearings and a triple shaft seal close the rotor assembly. Separation uses the built-in coarse separator in the tank plus an oversized external fine separator, and the intake control, minimum pressure, thermostat and safety valves are integrated on the same structure.
EMU, metro, light rail and freight train braking systems, pantograph assist and auxiliary air supply, plus locomotive main air source systems.
Anti-vibration mounting points, pressure settings and filter fitment are defined against the vehicle drawing, with technical drawings issued for approval before series supply.
A rolling stock OEM in the CRRC class has taken around 400 units per year for five years for EMU and metro braking and auxiliary air supply, replacing imported airends with a total cost reduction of over 30% and stable air supply under high vibration. A metro operator has approximately 120 units in service for four years with zero oil-emulsification or leakage failure since commissioning, maintenance limited to filter replacement, and the compact size fitting the narrow underframe.
It adds an anti-vibration integrated structure, a sealed housing and rail transit product certification, and is specified for continuous duty at ≤75 dB(A) between -25 °C and 45 °C.
Reported MTBF is up to 30,000 hours. In the metro project referenced above, maintenance has been limited to filter replacement.
The assembly measures 560 × 490 × 580 mm and weighs 96 kg, excluding the air filter assembly, and the metro fleet reports that this envelope fits the underframe.
The airend covers 5-12.5 bar, so brake pipe charging and auxiliary circuits are set within one platform rather than two separate units.
Rail transit product certification for locomotive, EMU, metro and freight air supply units, plus CE to MD 2006/42/EC and EN ISO 1217, ISO 9001:2015 and IATF 16949:2016.
Yes. Anti-vibration mounting points and interfaces are set against the drawing, and technical drawings are issued for approval before series supply.
Share the vehicle type, required pressure, mounting envelope and annual volume, and the rail configuration will be quoted with drawings.
Email: service@woyo.cn | Tel: +86 510 8599 6655 | WhatsApp: +86 189 1237 9878
Wuxi Woyo Superdo Compressor Co., Ltd. (WOLXAIR), No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China