{{ variable.name }}
Compact 96 kg airend for electric bus and electric truck braking, door actuation and air suspension, configured for on-demand start-stop operation.

GCU30 electric vehicle configuration — 96 kg integrated assembly, ≤75 dB(A)
The GCU30 electric vehicle version supplies braking, door actuation and air suspension air on battery electric buses and trucks. An 18-22 kW drive produces 2.5-3.3 m³/min at 7 bar across a 5-12.5 bar working range, and the complete 9-in-1 assembly weighs 96 kg in a 560 × 490 × 580 mm envelope. The configuration is set up for on-demand intermittent start-stop with energy-saving control, matches 24 V or 540 V motor options, and runs at ≤75 dB(A) — all of which matter where every kilowatt-hour comes out of the traction battery.
| Model | GCU30, electric vehicle configuration |
|---|---|
| Vehicle functions | Braking, door actuation, air suspension, battery-protection ride-height control |
| Operation mode | On-demand intermittent start-stop with energy-saving control |
| Motor options | 24 V / 540 V |
| Drive power | 18-22 kW |
| Speed | 2,900-6,000 rpm |
| Free air delivery | 2.5-3.3 m³/min at 7 bar |
| Working pressure | Max. 12.5 bar / min. 5 bar |
| Noise level | ≤75 dB(A) |
| Oil carry-over | Below 2 ppm (design ≤3 ppm) |
| Max. discharge temperature | 105 °C |
| Net weight | 96 kg |
| Dimensions (L×W×H) | 560 × 490 × 580 mm, excluding air filter assembly |
| Housing and rotors | High-grade cast iron; forged alloy steel rotors, UV patented profile |
| Bearings and seal | SKF heavy-duty rolling bearings; triple-sealing technology |
The electric vehicle configuration is available with 24 V or 540 V motor matching, with pressure setting and mounting interface defined by the vehicle drawing, and with an optional air filter. A high-pressure variant up to 30 bar for fuel-cell air supply is under evaluation and is not a released specification; it should not be ordered against current series production.

Integrated 9-in-1 structure keeps piping and brackets off the electric chassis
High-grade cast iron housing with forged alloy steel rotors machined to the German-designed UV patented profile over more than 20 precision steps. SKF heavy-duty rolling bearings and a triple shaft seal close the rotor assembly, while the built-in coarse separator plus oversized external fine separator keep oil carry-over below 2 ppm. Integrating the separator tank, filter positions and four valves into one assembly removes separate brackets and hoses from an already crowded electric chassis.
Electric buses, electric heavy trucks and electric mining trucks, covering braking, door actuation, air suspension and battery-protection ride-height control.
Motor matching (24 V or 540 V), pressure setting, mounting points and filter fitment are agreed against the vehicle drawing, with technical drawings and a motor controller and air dryer interface defined per project.
A new energy vehicle OEM in the BYD class has taken approximately 1,500 units per year for three years for electric bus braking, door actuation and air suspension. The lightweight, low-energy configuration meets the strict energy budget of electric buses, with 35% volume reduction, noise ≤75 dB(A) and the 540 V motor option in series use.
The electric vehicle configuration is offered with 24 V or 540 V motor options. The 540 V option is the one used in the electric bus fleet referenced above.
The unit runs on-demand with intermittent start-stop and energy-saving control. The drive is rated 18-22 kW at 2,900-6,000 rpm, and the reported result in electric bus service is low energy consumption within the vehicle energy budget.
96 kg net in a 560 × 490 × 580 mm envelope, excluding the air filter assembly, with a 35% volume reduction reported on the electric bus platform.
A high-pressure variant up to 30 bar is under evaluation for fuel-cell air supply. It is not yet a released specification, so it cannot be quoted as series product.
The platform covers 5-12.5 bar, which includes braking, door actuation and air suspension working pressures within a single airend range.
IATF 16949:2016 automotive quality management, ISO 9001:2015, and CE to MD 2006/42/EC with EN 1012-1 and EN ISO 1217.
Send the vehicle platform, motor voltage, required pressure and annual volume, and the electric vehicle configuration will be quoted with drawings.
Email: service@woyo.cn | Tel: +86 510 8599 6655 | WhatsApp: +86 189 1237 9878
Wuxi Woyo Superdo Compressor Co., Ltd. (WOLXAIR), No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China