Product Summary

The YN-SBL710 is an automatic glass loading machine built for PV module manufacturers. It handles glass up to 1960 mm in length and 990 mm in width, and automatically places EVA on the loaded glass, removing a manual handling step from the front end of a solar panel production line.

The machine runs in two production modes. On-board mode accepts string lengths of 900–2000 mm at a speed of 80–120 with a 1-out-of-1 puzzle board layout. Two-board mode accepts string lengths of 300–900 mm at a speed of 160–180 with a 1-out-of-2 puzzle board layout, so the same unit can be switched between small-format and large-format module work. The stated A-grade yield rate is 97%, and the machine is compatible with 40 W–260 W modules.

Utilities are standard factory grade: 15 kW peak power, 10 kW rated power and an air source of 0.5–0.8 MPa. The machine footprint is 3200 × 2800 × 2300 mm and it is supplied directly by YNTECH, the original manufacturer.

Key Selling Points

• Automatic glass loading and EVA placementThe machine loads glass and positions EVA automatically instead of by hand, which cuts direct labor per shift and reduces handling damage on the line.
• Two production modes in one unitOn-board mode runs 900–2000 mm string lengths at 80–120; two-board mode runs 300–900 mm at 160–180 with a 1-out-of-2 puzzle board, covering both small and large module formats.
• 97% A-grade yield rateThe documented A-grade yield rate of 97% supports lower material scrap and more consistent output across a production run.
• Wide size and power coverageGlass and EVA from 400×400 mm to 900×1960 mm, glass length 1960 mm, glass width 990 mm and compatibility with 40 W–260 W modules.
• Standard factory utilities15 kW peak and 10 kW rated power with a 0.5–0.8 MPa air source means the machine matches ordinary workshop supply without a special utility build-out.
• Direct supply from the original factoryBuilt by YNTECH (established 2015, 9000 m² factory, 100–200 units annual output) with easy setup and stable production, aimed at a quick payback.

Technical Specifications

Models and Options

One model is documented for this machine: YN-SBL710. The configuration options recorded for it are the production mode, the string length band and the puzzle board layout.

YNTECH supports customized line capacity from small pilot workshops to multi-GW mass production factories and designs the line layout around your module format. Share your glass size, module power and required throughput with the engineering team to confirm the correct configuration.

Materials and Structure

The YN-SBL710 is built from carbon steel, aluminum alloy and 304 stainless steel. These are the three materials specified for the model's frame and structural assemblies.

The machine measures 3200 mm long, 2800 mm wide and 2300 mm high. Because the unit is installed in a workshop environment, YNTECH specifies a dry, well-ventilated installation area free of corrosive gases, so the structure and moving parts are protected from moisture and corrosion damage. The operating area should be kept clean to stop debris and dust from entering the machine.

Applications

The machine is intended for PV module manufacturers and PV cell module factories, and is installed as part of a solar panel production line. According to YNTECH's company profile, its equipment adapts to conventional, TOPCon, HJT and BC solar module production.

Working conditions are an indoor factory environment with an ambient temperature of −10 to 40 °C in a clean, dust-controlled workshop. The machine runs 24/7: operators jog each individual mechanism through the operating pendant. Typical project types include new solar panel lines and production line upgrade projects.

Case Study

Customization

YNTECH provides layout design and installation services for automatic production lines, together with equipment manufacturing, factory installation, commissioning, technical training and after-sales maintenance. Line capacity can be configured from small pilot workshops up to multi-GW mass production factories.

For the YN-SBL710 itself, the documented options are the on-board and two-board configurations, the glass and EVA size range of 400×400 mm to 900×1960 mm, and cell widths from 78 mm to 210 mm. Requirements outside these documented values should be reviewed with the engineering team before ordering.

FAQ

• What glass sizes can the YN-SBL710 handle?Glass length is 1960 mm and glass width is 990 mm. For glass and EVA loading, the machine covers a maximum of 900×1960 mm and a minimum of 400×400 mm.
• Which module power range is it compatible with?The machine is compatible with 40 W to 260 W modules.
• What is the yield rate?The documented A-grade yield rate is 97%.
• What power and air supply does the machine need?Power supply peak power is 15 kW and rated power is 10 kW. The air source requirement is 0.5–0.8 MPa.
• How much floor space is required?The device dimensions are 3200 mm (L) × 2800 mm (W) × 2300 mm (H).
• What cell widths are supported?Cell width from 78 mm to 210 mm.
• What workshop conditions are required?An indoor factory environment at −10 to 40 °C in a clean, dust-controlled workshop. The installation area must be dry and well ventilated and free of corrosive gases, and the operating area must be kept clean so debris and dust do not enter the equipment.
• How is the machine operated and can it run continuously?Operators jog each individual mechanism via the operating pendant, and the equipment is available for 24/7 operation.

Inquiry Information

Send your glass size, module power range and required throughput to confirm the configuration and receive a quotation.

Product Image

Image Filename and Alt Suggestions

Filename: glass-loading-machine-yn-sbl710-line-flow-diagram.png
Alt text: YN-SBL710 automatic glass loading machine production line flow diagram