🌍 YZY Since 2009 ⭐ 17+ Year Industry Experience ✓ Verified Elite Supplier
✓ Verified Elite Supplier
Menu

In Mold Label (IML) Complete Guide: Materials, Printing & Applications

Author: YZY Release time: 2026-08-28 09:32:19 View number: 213

In Mold Label (IML): Complete Guide to Materials, Printing & Packaging Applications

An in mold label (IML), also written as in-mould label, is a printed label placed inside a mold before plastic resin is injected. During the injection molding process, the label fuses with the container wall and becomes a permanent part of the finished part. This technology is widely used in food packaging, daily chemical packaging, and industrial packaging.

Glossy white laminated in mold label film from YZY
Glossy white laminated film, one of the film formats in the YZY ZY-IML Series.

Common Labeling Problems in Plastic Packaging

Conventional labels applied after molding can face practical issues such as edge peeling, misalignment, moisture damage, and an extra production step. In-mold labeling addresses these challenges by fusing the label into the container wall during molding. The label becomes part of the package surface and does not peel off in normal use when the material and adhesion are correctly specified.

For food containers, label material, ink migration, and adhesion are compliance issues as well as visual concerns. This is why buyers in dairy, beverage, and ice cream packaging increasingly evaluate in mold label suppliers on food-contact safety and process reliability.

Why In Mold Label Technology Is Gaining Attention

In-mold labeling is no longer a niche technique. According to Grand View Research, the global in-mold labels market was valued at USD 2.31 billion in 2023 and is projected to reach USD 3.14 billion by 2030. Market Research Future estimates the market at USD 2.72 billion in 2024, with a projected CAGR of 3.94% to reach USD 4.16 billion by 2035. Differences in market definitions and base years explain the variation between reports.

Several structural trends support this growth. Food and beverage packaging accounted for the largest revenue share—over 41.3%—of the in-mold labels market in 2023, according to Grand View Research. The same source reports that polypropylene (PP) was the dominant material, holding a 47.2% share, and that injection molding led the production process segment with a revenue share exceeding 57.1% in 2023. Mordor Intelligence identifies Asia Pacific as both the fastest-growing and largest regional market for in-mold labels as of 2024.

For packaging buyers, this context matters: IML is a mature, technology-driven category with strong demand in food and beverage applications, and it offers a durable alternative to external labels.

YZY at a Glance: A Specialized In Mold Label Manufacturer

ZHEJIANG ZHONGYU SCIENCE AND TECHNOLOGY CO., LTD. (brand name YZY) is a manufacturing company founded in 2009. The company is located at Building 59, Zone E, Guohong Zhizao New Town, Xingke Road, Longgang, Wenzhou, Zhejiang, China. YZY specializes in in-mold labeling production and has 16 years of manufacturing experience.

YZY's main product range includes in-mold labeling, sealing films, embossed sheet sealing lids (also referred to as embossed lidding films), and POF films. These products are mainly used in food packaging and related industries. The company employs approximately 250 staff and operates a manufacturing facility covering 20,000 square meters. Annual production capacity reaches 200,000,000 units.

Export business accounts for 30% of total sales, with major markets worldwide. YZY states that it has established long-term cooperation with brands such as Starbucks, Nestlé, and Uni-President. The company also reports a complete set of qualification certificates, including QS, ISO, and BRC management system certifications, and has accumulated 48 patents. Inspection standards are applied throughout the process, from raw materials and production to finished products.

Core Product: ZY-IML Series In-Mold Labels

The main IML product is the ZY-IML Series. It is an in mold label primarily made of polypropylene (PP) and polyethylene (PE), with PET and multi-layer composite film options available. The product line includes food grade, daily chemical grade, and industrial grade labels. Typical model references include ZY-IML Series and ZY-IML-SERIES.

Materials and Grades

YZY supplies in mold label film in PP, PE, and PET. For food contact applications, the company uses food-grade virgin resin and food-grade low-migration water-based ink. The available material list includes PP (polypropylene), PE (polyethylene), PET (polyethylene terephthalate), and multi-layer composite laminated films. Grade selection is linked to the end-use container: food grade for food packaging, daily chemical grade for shampoo and detergent bottles, and industrial grade for paint and lubricant buckets.

Clear glossy laminated in mold label film
Clear glossy laminated film supports transparent container decoration.

Printing and Film Options

For in mold label printing projects, the ZY-IML Series is printed using 8-color high-precision rotogravure printing. Maximum printing width is 1200 mm, and printing precision is ±0.1 mm. Film thickness ranges from 30 μm to 100 μm and can be customized.

Buyers can choose among multiple film types: complex white gloss film, complex transparent gloss film, standard gloss film, matte laminated film, and holographic film. Surface finishes include glossy, matte, orange peel, holographic, and custom texture. This range allows custom printed in mold label projects to move beyond simple white labels.

Key Technical Parameters

The ZY-IML Series is specified with the following parameters:

  • Film thickness: 30 μm to 100 μm (customizable)
  • Maximum printing width: 1200 mm
  • Printing precision: ±0.1 mm
  • Tensile strength: ≥20 MPa
  • Adhesion strength: ≥5 N, with no peeling during injection molding
  • Scratch resistance: 4H (pencil hardness test)
  • Temperature resistance: -20°C to 120°C, suitable for cold chain and hot filling
  • Chemical resistance: resistant to weak acids, alkalis, and common detergents

For high adhesion in mold label requirements, the ZY-IML Series specifies adhesion strength ≥5 N with no peeling during injection molding. These values support the everyday needs of plastic containers: staying attached during molding, surviving filling and shipping, and resisting handling damage.

Food-Grade Compliance

Food-grade in mold labels must meet strict contact and migration requirements. The ZY-IML Series uses food-grade low-migration water-based ink, and the company states compliance with FDA 21 CFR, BRCGS Packaging Materials, ISO22000, and QS standards. Migration tests meet EU Regulation (EU) No 10/2011 for plastic materials intended to come into contact with food. In the Chinese market, the product is positioned for food contact labeling projects with FDA/GB compliance and non-toxic materials.

Gravure printing press at YZY
8-color rotogravure printing is central to YZY's in mold label production.

Step-by-Step: How to Plan a Custom In Mold Label Project

Custom in mold label projects require alignment between printing and molding conditions. The typical workflow based on YZY's published capability is:

  1. Define the container and mold. Determine the final part—paint bucket, yogurt cup, bubble tea cup, ice cream container, bottle, or another plastic container—and confirm the molding process.
  2. Select the label grade. Choose food grade, daily chemical grade, or industrial grade according to the filling environment and end use. Food packaging normally requires food-grade resin and food-safe ink.
  3. Choose film type and finish. Select from complex white gloss, transparent gloss, standard gloss, matte laminated, or holographic film; then choose a surface finish such as glossy, matte, orange peel, or custom texture.
  4. Confirm print specifications. Set the number of colors, custom size, color matching, and printable width within YZY's 8-color gravure printing capability and 1200 mm maximum width.
  5. Validate technical parameters. Check adhesion strength, temperature resistance, and chemical resistance against filling and logistics conditions.
  6. Plan inspection. YZY applies strict inspection standards from raw materials through production to finished products.

The ZY-IML Series is positioned for injection molding. If a project requires blow molding in mold label applications, buyers should confirm film formulation and process compatibility with YZY directly.

Typical Use Cases: From Yogurt Cups to Paint Buckets

In mold labels are suitable for a broad range of plastic containers. YZY's product type list includes yogurt cup IML, paint bucket IML, bubble tea cup IML, ice cream container IML, plastic bottle IML, lubricant bucket IML, and cosmetic container IML. End-use segments include food and beverage, daily chemicals, household products, pharmaceuticals, cosmetics, and industrial packaging.

  • Paint bucket IML: Industrial-grade labels for paint and lubricant buckets need durable adhesion and resistance to handling. Paint bucket IML is a listed category in YZY's range.
  • Yogurt cup IML: Food-grade IML supports direct food contact and bright decoration, with temperature resistance suitable for cold chain and hot filling.
  • Bubble tea cup IML and ice cream container IML: Transparent film options can keep the container look clear while providing durable branding.
  • Plastic bottle IML: PP or PE bottle applications benefit from labels that stay aligned and resist peeling.
  • Daily chemical IML: Shampoo and detergent containers require resistance to moisture and common detergents; YZY specifies chemical resistance to weak acids, alkalis, and common detergents.

For buyers looking for an in mold label for plastic containers, the common value is one-piece integration: the label is molded into the container, reducing downstream labeling steps. Buyers searching for a waterproof in mold label should focus on the published parameters for chemical resistance, adhesion strength, and temperature tolerance.

Matte white laminated in mold label film
Matte laminated film is one of the available surface and film options in the ZY-IML Series.

Comparison: Food Grade vs Daily Chemical vs Industrial IML

The differences between IML grades affect cost, compliance, and use. The table below summarizes the published ZY-IML Series options.

Feature Food Grade IML Daily Chemical IML Industrial IML
Known applications Yogurt cup IML, ice cream container IML, food packaging Shampoo, detergent, household products Paint bucket IML, lubricant bucket IML, industrial packaging
Materials PP / PE / PET, with food-grade virgin resin PP / PE / PET PP / PE / PET
Compliance focus FDA 21 CFR, BRCGS, ISO22000, QS, EU 10/2011 Chemical resistance to weak acids, alkalis, detergents Adhesion strength ≥5N, scratch resistance 4H, tensile strength ≥20MPa

Note that the table reflects YZY's stated product classification. Buyers should always confirm the exact grade and compliance paperwork for their specific project.

Manufacturing Strength and Quality Assurance

YZY operates a 20,000-square-meter manufacturing facility with approximately 250 staff and annual production capacity of 200 million units. Production involves printing presses, label cutting machines, and high-precision gravure high-speed printing equipment. The company has a professional R&D team and laboratory and reports 48 accumulated patents.

Quality control follows strict inspection standards throughout the process—from raw materials and production to finished products—so that finished labels meet national and industry standards. The company has passed QS, ISO, and BRC management system certifications and uses food-grade low-migration water-based ink for food-contact products.

YZY production workshop
YZY's production workshop.

Market Position and Industry Recognition

YZY reports long-term cooperation with brands including Starbucks, Nestlé, and Uni-President. The company describes itself as an enterprise specializing in in-mold labeling with 16 years of manufacturing experience, 48 accumulated patents, and a complete set of quality certificates.

The global in-mold labels market includes major international producers such as CCL Industries, Multi-Color Corporation, and Huhtamaki, according to Future Market Insights. Within this competitive landscape, YZY focuses on specialized IML production, food-grade compliance, and customization rather than broad packaging supply.

The company's export business accounts for 30% of total sales, with major markets worldwide. This indicates that YZY's in mold labels are used outside China as well as in the domestic market.

Why Buyers Choose YZY: Core Strengths

Specialized Product Focus

YZY's main product is in mold labeling. The ZY-IML Series is explicitly intended for the injection molding industry, which can make supplier selection simpler for buyers who need IML rather than a broad portfolio of unrelated labels.

Customization and Film Variety

Options include custom film thickness, custom size, custom color matching, custom film formulation, and custom texture. The film type range—from complex white gloss to holographic—supports different brand designs and container styles.

Food-Grade Compliance

Food-grade variants use food-grade virgin resin, food-grade low-migration water-based ink, and comply with FDA 21 CFR, BRCGS, ISO22000, QS, and EU 10/2011 migration requirements. This is especially relevant for dairy, beverage, ice cream, and other food packaging buyers.

Production Capacity and Global Reach

With annual capacity of 200 million units and exports representing 30% of sales, YZY can support international packaging projects. The company publishes direct contact channels for inquiries: yzy@inmoldlabel.net and +86 182 6778 1866.

Frequently Asked Questions

What is an in mold label (IML)?

An in mold label is a printed label placed inside a mold before plastic injection. The label is embedded into the container during the molding process. In YZY's product line, the ZY-IML Series is designed for injection molding and is primarily made of PP and PE, with PET and multi-layer composite film options.

Which materials are used for YZY in mold labels?

YZY in mold labels are manufactured using PP (polypropylene), PE (polyethylene), and PET (polyethylene terephthalate), including PP/PE combinations. Food-grade variants use food-grade virgin resin and food-grade low-migration water-based ink.

Is YZY in mold label food safe?

Food-grade versions are designed for food contact applications. They use food-grade low-migration water-based ink and comply with FDA 21 CFR, BRCGS Packaging Materials, ISO22000, and QS standards. Migration tests meet EU Regulation (EU) No 10/2011 for plastic materials intended to come into contact with food.

What customization options are available?

Buyers can customize film thickness (30 μm to 100 μm), printing size, color matching, film formulation, and surface texture. Available film types include complex white gloss, complex transparent gloss, standard gloss, matte laminated, and holographic film. Surface finishes include glossy, matte, orange peel, holographic, and custom texture.

Which containers can use YZY in mold labels?

Typical applications include yogurt cups, paint buckets, bubble tea cups, ice cream containers, plastic bottles, lubricant buckets, and cosmetic containers. The product range also covers food-grade, daily chemical grade, and industrial grade labels.

How can I request a quote, sample, or more information?

For direct inquiries, YZY can be contacted by email at yzy@inmoldlabel.net or by phone/WhatsApp at +86 182 6778 1866. A company brochure is also available for download.

Conclusion: What YZY Offers to In Mold Label Buyers

YZY is a specialized manufacturer rather than a generic flexible packaging supplier. Its ZY-IML Series covers food, daily chemical, and industrial applications, with technical parameters that address real purchasing concerns: adhesion, scratch resistance, temperature tolerance, chemical resistance, and food-contact compliance.

The combination of 16 years of IML production experience, a 20,000-square-meter facility, annual capacity of 200 million units, and a 30% export ratio gives buyers a clear basis for supplier evaluation. The published certification list—FDA 21 CFR, BRCGS, ISO22000, QS—and EU 10/2011 migration compliance are especially relevant for food packaging projects.

For buyers comparing in mold label suppliers, the practical next step is to confirm the required film type, grade, printing specification, and molding conditions, then request a customized quotation or sample from YZY. You can download the YZY in-mold label brochure or contact the company directly by email or phone.

YZY company site
Contact YZY for project-specific IML recommendations.

Planning an in mold label project?

Discuss film selection, custom printing, and food-grade compliance with YZY.

Request a quote Visit YZY website Download brochure

Have Questions or Need More Details?

Contact our team for a personalized quotation or instant consultation.

Request a Quotation

Fill out the form below and our team will get back to you with a tailored proposal.

Attach images, files, or documents.

We'll respond within 24 hours (Mon–Sat).

WhatsApp Direct Chat

Prefer to chat in real-time? Message us on WhatsApp for instant assistance & quick answers.

  • Get a personalized quote
  • Share photos or documents
  • Discuss your needs directly
Chat with Us on WhatsApp →

Typically replies in 5–30 minutes during business hours.

Support: Images, videos, PDF