Procurement guide for engineering and project teams | Oil & Gas and Mining

Oilfield RTP Buying Guide: Match the Pipe to Your Project

Reinforced Thermoplastic Pipe (RTP) is a flexible, multilayer pipe system for high-pressure fluid transmission in demanding industrial projects. For oil & gas and mining buyers, the selection question is not only which pipe has the required pressure rating; it is which RTP configuration fits the project's pressure, chemical, installation, compliance, and supply requirements. This guide uses the documented ZYfire RTP/TCP product case to show how buyers can match a spoolable reinforced thermoplastic pipe to a specific project scenario.

The Procurement Problem: Matching Pipe to Operating Conditions

Oilfield and mining piping projects often run continuously. The documented working conditions for RTP in these sectors include higher pressure rating, corrosion resistance, no swelling, flexibility, long single-pipe length, non-frequent fittings, simple installation, and long cycle life. RTP is also specified for explosion-proof environments and 24/7 operation. When a project specification misses one of these parameters, the pipe system can create fitting, maintenance, or compliance risk.

Why RTP Is Increasingly Considered in Oil & Gas and Mining

According to Strategic Market Research, the global reinforced thermoplastic pipes market was estimated at USD 7.2 billion in 2024 and is projected to reach USD 10.2 billion by 2030, growing at a CAGR of 5.9%.

Fact.MR reports that the oil & gas industry segment accounts for approximately 71.2% of global RTP demand as operators seek corrosion-free alternatives to steel. The same source estimates that glass fiber reinforced thermoplastic pipes represent approximately 64.7% of the product market. Mordor Intelligence and Market Research Future identify Asia Pacific as both the fastest-growing and largest regional market for thermoplastic pipes in 2024/2025.

ZYfire RTP/TCP: A Documented RTP Solution for Project Engineers

ZYfire Hose Corporation is a Beijing Stock Exchange-listed manufacturer founded in 2000, producing polymer composite piping for oil and gas exploitation, emergency rescue, mineral development, slurry transportation, agricultural water conservancy, and marine engineering. The company's RTP/TCP product is built for high-pressure fluid transmission in oil & gas and mining applications.

The documented configuration, model 2" 3500PSI O.D:79.8, is a representative RTP variant. Its core parameters are:

Working Conditions and Design Features

• Corrosion resistance for aggressive fluid environments
• High-pressure rating up to 3500 PSI
• No swelling in documented service
• Flexibility for routing and installation
• Long single-pipe length of 920 m per coil
• Non-frequent fittings in long pipe runs
• Simple installation
• Long cycle life
• Explosion-proof design for mining and oil & gas duty
• 24/7 continuous operation

Reinforcement Material Selection

The reinforcement layer can be produced with polyester filament, aramid fiber tape, glass fiber tape, or steel wire tape. The outer and inner layers are HDPE or PE-RT, with UV and antioxidant options available. Product type options include polyester fiber tape-reinforced RTP, steel wire tape-reinforced RTP, aramid fiber tape-reinforced RTP, and glass fiber tape-reinforced RTP. According to Fact.MR, glass fiber reinforced thermoplastic pipe is the largest product segment by market share. Material selection should still be driven by the project's mechanical and chemical requirements.

Compliance and Standard Scope

API Specification 15S (2nd Edition, 2016) is the industry-standard requirement for the manufacture and qualification of spoolable reinforced plastic line pipe for oilfield applications. The standard covers pipe diameters up to 6 inches. ZYfire RTP is certified under API 15S, which is the documentation buyers should request for oilfield service. If a project requires a bore larger than 6 inches, buyers should ask the manufacturer for an engineering review rather than assume the API 15S scope applies.

Step-by-Step: How to Match RTP to a Project Scenario

Step 1. Define the fluid duty and operating envelope

Start with pressure, corrosion, and running mode. The documented ZYfire RTP/TCP variant is rated at 3500 PSI and is designed for corrosion-resistant, explosion-proof, 24/7 fluid transmission.

Step 2. Establish the compliance requirement

For oilfield spoolable reinforced plastic line pipe, request API 15S certification and confirm that the pipe diameter falls within the standard's scope.

Step 3. Select the reinforcement architecture

Choose among polyester filament, aramid fiber tape, glass fiber tape, or steel wire tape based on project-specific mechanical and chemical requirements.

Step 4. Plan installation around coil length

The product is available in a single length of 920 m per coil. This reduces the number of fittings required in long pipe runs and supports simpler installation, especially where flexibility is needed.

Step 5. Confirm customization, capacity, and lead time

ZYfire's OEM/ODM capability covers size/diameter, working pressure, weight, length, and bending radius. The documented monthly capacity is 100,000 m, MOQ is 50 m, standard lead time is 30 days, and quality control is 100% testing.

Use Cases: Applying RTP to Oilfield and Mining Scenarios

Oilfield Flowlines and Injection Service

For oilfield fluid transmission, the pipe must hold pressure continuously and resist corrosion. The documented RTP variant is rated at 3500 PSI, is API 15S certified, and operates in 24/7 mode. Its 920 m coil length reduces fitting count on long runs.

Mining Fluid Transmission

Mining projects specify high-pressure tolerance, corrosion resistance, and explosion-proof design. The product is applicable to mining fluid transmission and is built for continuous operation, long service life, and simple installation.

Long-Term OEM/ODM Programs

In one documented OEM/ODM program, ZYfire supplied 120,000 m of RTP over five years for fluid transmission. The reported result is stable operation under high-pressure conditions, no leakage, and reduced maintenance costs. The documented project references include markets such as the United States, Australia, China, South Korea, UAE, and Saudi Arabia.

Comparison: Project Requirements vs. Documented RTP Evidence

The table below maps common project priorities to the corresponding RTP evidence.

Supply Chain and Quality Evidence

ZYfire's laboratory has passed professional accreditation by the China National Accreditation Service for Conformity Assessment (CNAS), giving the company nationally and internationally recognized testing capability. The company's quality control process is documented as 100% testing.

ZYfire's global layout includes production bases, research and development centers, and logistics warehouses in the United States, Saudi Arabia, the United Arab Emirates, Malaysia, and China (Nanjing Jiangsu, Taizhou Jiangsu, and Chuzhou Anhui). Products are exported to more than 70 countries and regions, including Europe, the United States, the Middle East, and Southeast Asia.

The case record of 120,000 m supplied over five years, with stable high-pressure operation and no leakage, is one example of the product's long-cycle behavior in fluid transmission service.

Frequently Asked Questions

Request RTP Samples, Quotes, or the Company Brochure

For an oilfield or mining project, start with the documented parameters, then confirm your custom requirements with the manufacturer.

Visit ZYfire Hose Corporation | Email: equiry@zyfire.com | Tel: +86 523 88802123 | WhatsApp

Download the company brochure (PDF)

Conclusion

Reinforced Thermoplastic Pipe selection for oil & gas and mining projects comes down to matching a documented product to the project's operating envelope. The ZYfire RTP/TCP product, with its 3500 PSI rating, API 15S certification, 920 m coil length, and OEM/ODM customization options, provides a traceable starting point for scenario-based procurement.