LED High Bay Retrofits Solve Warehouse Lighting Pain Points
A warehouse LED high bay retrofit solves four problems at the same time: uneven visibility across racking, energy spend locked into legacy wattage, maintenance work at height, and fixture survival in dusty industrial air. The retrofit is a specification decision before it is a purchase decision, because fixture geometry, wattage, luminous efficacy and ingress protection decide whether the new installation actually performs.
Zhejiang Lepeng Electric Appliance Co.,Ltd. is an LED lighting manufacturer founded in 2009 in Shangyu, Zhejiang, China. The company employs 2,000 people across a 200,000 m² manufacturing footprint, exports roughly 90% of its output to the EU, Southeast Asia, the Middle East and Latin America, and sells under its own brand MKOPTO. Two high bay families from this manufacturer are relevant to warehouse retrofits: the HL-E01 UFO high bay light and the SH-E01 linear high bay light.
Thailand factory — one of the production sites listed in the manufacturer's image records.
The Four Warehouse Lighting Pain Points a Retrofit Must Solve
Warehouse lighting complaints usually trace back to the same four issues. Each one maps to a specification decision rather than a product category, which is why two facilities of identical size can end up with different high bay choices.
1. Poor visibility where work actually happens
Uniform light on aisle floors and rack faces matters more than headline lumen output. Light that lands above the top beam or between racks adds connected load without improving picking accuracy or forklift safety. Beam distribution and mounting geometry decide where the light goes, and that is why a published distribution pattern such as the SH-E01's 90° (H) × 120° (V) beam angle is a specification input, not a detail.
2. Energy cost locked into legacy wattage
Energy consumption is a function of connected wattage, operating hours and the local tariff. A retrofit changes the wattage term; operating hours remain a site variable. Because savings depend on the existing fixture type, the electricity rate and the shift pattern, a credible business case is built from a metered baseline rather than a generic percentage claim. What a buyer can verify up front is the rated wattage and the published luminous efficacy of the replacement fixture.
3. Maintenance at height
Fixtures mounted high above the racking are expensive to service: access equipment, permits, and a production window all carry cost. Specifying a fixture with a documented warranty period moves maintenance from reactive to planned. The SH-E01 carries a 5-year warranty, which is the kind of term that can be written directly into a retrofit plan.
4. Dust, heat and electrical quality
Warehouse air carries cardboard dust, packaging fibres and, in some operations, process dust. That dust settles on lenses, reduces delivered light, and enters poorly sealed housings. Ingress protection and thermal design are therefore performance specifications, not marketing labels. On the electrical side, sites with welding equipment, large motors or unstable supply benefit from fixtures with published surge protection — the HL-E01 is rated 6KV/6KV.
Industry Background: Why LED High Bays Became the Default Retrofit Path
LED technology is no longer an alternative in commercial lighting; it is the majority of it. Grand View Research estimated the global commercial lighting market at USD 47.54 billion in 2024, with LED products holding a 58.1% revenue share of that total. Fortune Business Insights valued the global LED lighting market at USD 109.11 billion in 2025 and projects USD 336.90 billion by 2034.
The supply side is concentrated. According to OEC, China exported USD 31.4 billion in light fixtures in 2024, equal to 59.3% of total global light fixture exports. For a warehouse owner or contractor specifying a retrofit, that means most quotations arriving on the desk originate from the same manufacturing base — and differentiation has to come from documented specifications, not from country of origin.
Documentation is where compliance enters the process. UL Solutions lists IEC 60598 as the luminaire standard, together with UL 1598 for luminaires and UL 8750 for LED equipment. A retrofit that will be inspected, insured or handed to a facility manager should reference these standards explicitly in the procurement file.
The Retrofit Answer: HL-E01 UFO and SH-E01 Linear High Bays
Most warehouse retrofits are covered by two fixture geometries. The UFO high bay projects a concentrated downward pattern from a round housing; the linear high bay spreads light along a rectangular body over aisles and work zones. Zhejiang Lepeng Electric Appliance Co.,Ltd. manufactures both formats.
HL-E01: UFO high bay for concentrated downward light
- Power options: 100 / 150 / 200 / 240W
- Luminous efficacy: 140 / 160 / 185 / 210 lm/W across the range
- Colour temperature: 4000K / 5000K / 6500K
- Input voltage: 185–265V or 100–265V
- Surge protection: 6KV/6KV
- Construction: die-cast aluminum body with PC lens
- Wiring: 3×1.0mm² cable with 300mm exposed leads, pre-wired to the power supply
- Stated applications: warehouses, factories, retail spaces, gyms
The pre-wired cable and the dual voltage options reduce installation labour on a like-for-like replacement, where the existing circuit and mounting point are reused rather than rebuilt. The die-cast aluminum body is the thermal path for the LED module, which is the part of a high bay that determines how much light the fixture still delivers after several years of operation.
SH-E01: linear high bay for aisles and dusty halls
- Power options: 50 / 100 / 150 / 200W
- Luminous efficacy: 100 / 135 / 150 lm/W across the range
- Beam angle: 90° (H) × 120° (V)
- Colour temperature: 3000K / 4000K / 5000K / 6500K
- Ingress protection: IP65
- Warranty: 5 years
- Construction: aluminum alloy housing with PC/PMMA lens
- Dimensions: 305.6×97.3×68.1mm / 580.6×97.3×68.1mm / 855.6×97.3×68.1mm
- Stated applications: warehouses, factories, workshops
The three body lengths correspond to different wattages, so a long narrow aisle and a compact work bay can be lit by the same product family without mixing brands or colour temperatures inside one hall.
IP65 and dusty environments
IP65 on the SH-E01 means the fixture is protected against dust ingress and against water jets. In a warehouse that handles packaging, textiles, flour, cement or any friable material, that protection is what keeps the lens clear and the LED compartment sealed between cleaning cycles. Buyers evaluating the HL-E01 UFO format for a dusty hall should confirm the ingress protection required for that specific environment with the supplier before ordering, because the available HL-E01 datasheet does not state an IP rating.
Wattage ladder: tailoring instead of oversizing
The two families together offer 50W, 100W, 150W, 200W and 240W options — the HL-E01 in 100 / 150 / 200 / 240W and the SH-E01 in 50 / 100 / 150 / 200W. That ladder lets a designer match output to mounting height, rack height and aisle width instead of standardising on one wattage for the whole building. Oversizing raises connected load and glare without improving visibility at the picking face, and it is a common retrofit error when the original installation is replaced fixture-for-fixture without a lighting plan.
Linear high bay format — the geometry specified as SH-E01 for warehouse aisles and work zones.
Step-by-Step: Running a Warehouse High Bay Retrofit
The sequence below keeps the retrofit evidence-based and avoids the most expensive mistake in warehouse lighting: replacing fixtures before the lighting requirement is defined.
- Audit the existing installation. Record fixture type, quantity, mounting height, spacing, circuit layout and mounting method. This baseline is what any savings or illuminance comparison will be measured against.
- Define the lighting requirement. Set target illuminance for aisle floors and rack faces, plus a uniformity target. Ask for a lighting plan built on the actual racking layout rather than a watt-for-watt substitution.
- Choose the fixture geometry. Linear high bays suit long aisles and rack faces, where a 90° (H) × 120° (V) distribution spreads light along the run. UFO high bays suit open floor areas and concentrated work zones.
- Select wattage from the available ladder. Match output to the geometry of the space using the photometric plan, not the wattage of the fixture being removed.
- Match the fixture to the environment. Specify IP65 where dust is present, choose the housing and lens material for the cleaning regime, and set colour temperature per zone — the SH-E01 covers 3000K to 6500K and the HL-E01 covers 4000K to 6500K.
- Verify electrical compatibility. Confirm the supply voltage against the fixture options (HL-E01: 185–265V or 100–265V) and check surge protection requirements where the site has heavy switching loads.
- Lock the documentation. Match the certificate scope, model number and variant to what is actually being shipped, and file the test standards with the project record.
- Run a pilot zone. Install one aisle or bay, then measure. Measured illuminance and uniformity either validate the plan or send it back for revision before the full order is committed.
- Plan the rollout against capacity and lead time. Zhejiang Lepeng reports monthly capacity of 45 million LED lamps and 5 million LED luminaires, with a typical lead time of 30–45 days. Sequence deliveries around operational windows so that no zone is left dark during the changeover.
Use Cases: Where Each Retrofit Pattern Fits
High-rack distribution centres
Where racking runs in long parallel aisles, linear high bays mounted over the aisles put light on the rack faces and the floor between them. The SH-E01's IP65 rating also suits facilities where cardboard dust accumulates on fixtures.
General storage and workshop halls
Open floor areas with mixed forklift traffic and work benches are typically served by UFO high bays. The HL-E01, with 100–240W options and efficacy up to 210 lm/W across its range, is specified for warehouses, factories, retail spaces and gyms.
Dusty processing and packaging warehouses
Where airborne dust is continuous, the sealed SH-E01 housing keeps the optical compartment clean and the 5-year warranty gives the maintenance plan a defined horizon. Cleaning intervals still need to be scheduled — ingress protection reduces dust entry, it does not eliminate surface fouling.
Industrial-retail hybrids
Facilities that combine storage with a customer-facing area often need different colour temperatures in different zones. Both families support multiple CCT options, which allows one specification document to cover the whole building.
Comparison Table: HL-E01 vs SH-E01
| Specification | HL-E01 (UFO high bay) | SH-E01 (Linear high bay) |
|---|---|---|
| Fixture format | Round UFO high bay | Linear high bay |
| Power options | 100 / 150 / 200 / 240W | 50 / 100 / 150 / 200W |
| Luminous efficacy | 140 / 160 / 185 / 210 lm/W | 100 / 135 / 150 lm/W |
| Colour temperature | 4000K / 5000K / 6500K | 3000K / 4000K / 5000K / 6500K |
| Beam angle | Not stated in the available datasheet | 90° (H) × 120° (V) |
| Housing and lens | Die-cast aluminum body + PC lens | Aluminum alloy housing + PC/PMMA lens |
| Ingress protection | Not stated in the available datasheet — confirm for dusty sites | IP65 |
| Surge protection | 6KV/6KV | Not stated in the available datasheet |
| Input voltage | 185–265V or 100–265V | Not stated in the available datasheet |
| Dimensions | Not stated in the available datasheet | 305.6×97.3×68.1mm / 580.6×97.3×68.1mm / 855.6×97.3×68.1mm |
| Warranty | Not stated in the available datasheet | 5 years |
| Stated applications | Warehouses, factories, retail spaces, gyms | Warehouses, factories, workshops |
Read as a decision table, the comparison separates the two products by environment rather than by quality. Where dust and wash-down are part of daily operation, the SH-E01 answers with IP65 and a 5-year warranty. Where surge exposure and wide voltage tolerance matter more, the HL-E01 answers with 6KV/6KV surge protection and dual voltage options.
| Warehouse pain point | Specification lever to check |
|---|---|
| Dark aisles and glare | Beam distribution (SH-E01: 90° H × 120° V) and a photometric plan built on the racking layout |
| High energy spend | Rated wattage plus published luminous efficacy — HL-E01 up to 210 lm/W, SH-E01 up to 150 lm/W |
| Dust on lenses and inside housings | IP65 (SH-E01) and sealed aluminum alloy + PC/PMMA construction |
| Unstable supply and switching transients | Surge protection rating (HL-E01: 6KV/6KV) and voltage option match |
| Maintenance access at height | Documented warranty term (SH-E01: 5 years) and planned replacement cycles |
What to Verify Before You Commit
Specification is only half of the retrofit file. The commercial and documentary side decides whether the installation can be handed over cleanly.
- Certificate scope. Zhejiang Lepeng holds a TUV SUD GS certificate, number Z1A 123276 0002 Rev. 00, issued 23 January 2024 and tested against EN 60598-1:2021+A11:2022, EN 60598-2-1:2021, EN 62493:2015 and AFPS GS 2019:01 PAK for the EU and German markets. The company lists SH-E01 and HL-E01 among the product records associated with this certificate. Confirm that the certificate scope covers the exact model and variant being quoted.
- Purchasing terms. The published procurement terms list a MOQ of 100 units, FOB delivery, a 30% deposit, final payment against a copy of the bill of lading, and pre-shipment testing as the acceptance criterion.
- Capacity and lead time. Monthly capacity is stated as 45 million LED lamps and 5 million LED luminaires, with a typical lead time of 30–45 days — relevant when a multi-phase rollout has to match operational windows.
- OEM and ODM scope. The manufacturer provides both OEM (contract manufacturing of existing designs) and ODM (design and manufacturing to client specifications) services, with customization of fixture appearance, power and accessories discussed at product level.
- After-sales support. Remote support is offered for installed projects.
- Track record. For warehouse and factory lighting applications, the manufacturer lists project durations of 5–10 years with stable operation reported.
Jiangxi production base — one of the manufacturing sites behind the luminaire capacity stated for retrofit orders.
Frequently Asked Questions
What certifications and standards should a warehouse LED high bay retrofit meet?
For EU projects, the relevant luminaire baseline is EN 60598-1 with EN 60598-2-1 and EN 62493. Zhejiang Lepeng holds a TUV SUD GS certificate, Z1A 123276 0002 Rev. 00, issued 23 January 2024 and tested against EN 60598-1:2021+A11:2022, EN 60598-2-1:2021, EN 62493:2015 and AFPS GS 2019:01 PAK, and lists SH-E01 and HL-E01 among the associated product records. Internationally, UL Solutions identifies IEC 60598, UL 1598 and UL 8750 as the commonly referenced standards for luminaires and LED equipment. Buyers should confirm that the certificate scope matches the exact model and variant in the quotation.
Which LED high bay is suitable for high-ceiling warehouse industrial lighting?
Both the HL-E01 and the SH-E01 are specified for warehouse use, and the choice depends on the layout. The HL-E01 UFO high bay covers 100 / 150 / 200 / 240W with efficacy of 140 / 160 / 185 / 210 lm/W, 4000K–6500K colour temperature, 185–265V or 100–265V input and 6KV/6KV surge protection in a die-cast aluminum body with PC lens. The SH-E01 linear high bay covers 50 / 100 / 150 / 200W with 100 / 135 / 150 lm/W, a 90° (H) × 120° (V) beam angle, 3000K–6500K colour temperature, IP65 protection and a 5-year warranty. Linear formats serve long aisles and rack faces; UFO formats serve open floor areas and concentrated work zones.
What are the purchasing terms for a warehouse retrofit order?
The published procurement terms list a MOQ of 100 units, FOB delivery terms, a 30% deposit with final payment against a copy of the bill of lading, and pre-shipment testing as the acceptance criterion. Orders of that size are normally split into phases so that measured pilot results can be reviewed before the remaining zones are released.
How is a high bay order validated before shipment?
Pre-shipment testing is the stated acceptance criterion, which means the order is inspected before it leaves the factory rather than after arrival on site. For a retrofit, that check is best combined with a pilot installation of one aisle or bay: measured illuminance and uniformity from the pilot confirm the photometric plan, and the pre-shipment test confirms that the delivered batch matches the approved specification.
What lead time should a warehouse lighting retrofit plan for?
Typical lead time is 30–45 days, against monthly capacity of 45 million LED lamps and 5 million LED luminaires. Multi-phase warehouses should sequence deliveries around operational windows and keep the lead time in the project schedule rather than in the purchase order remarks. Retrofit enquiries, specifications and sample requests can be sent directly to the manufacturer's export team.
Conclusion: Retrofitting Is a Specification Exercise
Warehouse lighting pain points are predictable, and so are the levers that solve them: a distribution pattern that reaches the floor, a wattage ladder that avoids oversizing, published efficacy figures that make the energy case auditable, and ingress protection that keeps dust out of the optical compartment. The HL-E01 UFO high bay and the SH-E01 linear high bay cover those levers across 50W to 240W, with efficacy up to 210 lm/W and 150 lm/W respectively, IP65 on the linear format and a 5-year warranty to anchor the maintenance plan.
The disciplined path is to audit, define, pilot and then roll out — using documented specifications and certificate scope as the acceptance criteria at every stage.
Next step: request a retrofit quotation
Send the fixture count, mounting height, racking layout and target illuminance, and the team at Zhejiang Lepeng Electric Appliance Co.,Ltd. will map the requirement to HL-E01 or SH-E01 configurations. Sample requests, OEM/ODM briefs and volume quotations are handled by the export team.
Website: www.idealbright.com
Email: fish@idealbright.com
WhatsApp: +86-13777885334
Tel: +86-575-82188752
Address: No. 1, Yueguo Road, Baiguan Industrial Park, Shangyu District, Shaoxing City, Zhejiang Province
Product catalogue and specifications: download the brochure (PDF)
Commercial LED lighting portfolio — high bays, flood lights, street lights and indoor luminaires from the same manufacturer.
Have Questions or Need More Details?
Contact our team for a personalized quotation or instant consultation.
Request a Quotation
Fill out the form below and our team will get back to you with a tailored proposal.
WhatsApp Direct Chat
Prefer to chat in real-time? Message us on WhatsApp for instant assistance & quick answers.
- Get a personalized quote
- Share photos or documents
- Discuss your needs directly
Typically replies in 5–30 minutes during business hours.