
{{ variable.name }}
A lightweight 980nm soft-tissue dental laser with Continuous Wave, Pulsed and Super-Pulsed modes, more than 57 guided clinical cases, and SMA905 fiber compatibility for 200 µm, 300 µm and 400 µm tips.
The PIOON H1 Plus is a dental diode laser device built on a 980nm wavelength with up to 20W peak power. The 980nm wavelength is absorbed by hemoglobin and water, which supports soft tissue cutting, coagulation and hemostasis during chairside procedures.
What separates the H1 Plus from dental lasers limited to Continuous Wave and standard pulsed output is Super-Pulsed technology. Ultra-short microsecond pulses deliver concentrated energy in short bursts with cooling intervals between them, supporting precise incisions while helping to limit heat accumulation in surrounding tissue. Duty cycle is adjustable from 10% to 90%.
Daily operation runs on PIOON Smart OS through a 7-inch 2K Ultra-HD touchscreen. More than 57 built-in clinical cases provide suggested parameters, and two interfaces — Preset Mode for guided treatment selection and Expert Mode for manual parameter control — let clinics match the workflow to the operator's experience level.
Super-Pulsed Microsecond Output
Ultra-short pulses with cooling intervals between bursts, in CW, Pulsed and Super-Pulsed modes — concentrated energy for precise soft tissue cutting with reduced thermal impact on surrounding tissue.
980nm at up to 20W Peak Power
A wavelength absorbed by hemoglobin and water, delivering cutting, coagulation and hemostasis capability for efficient soft tissue procedures.
57+ Clinical Cases with Parameter Guidance
Select a procedure and the system surfaces suggested laser settings, shortening preparation time for new and experienced laser users alike.
7-inch 2K Ultra-HD Screen on Smart OS
A clear, intuitive interface for navigation, parameter adjustment and procedure selection at the chairside.
Wi-Fi Updates and On-Board Training
16GB internal storage holds multimedia training videos and clinical resources, while direct Wi-Fi connectivity supports software and clinical parameter library updates.
Under 2 kg with 2850mAh Battery
A compact 225 × 150 × 150mm body and integrated rechargeable battery keep the unit easy to position and operate in modern dental clinics.
| Wavelength | 980nm |
|---|---|
| Peak Power | Up to 20W |
| Operating Modes | Continuous Wave (CW) / Pulsed / Super-Pulsed |
| Frequency | Up to 20kHz |
| Duty Cycle | Adjustable, 10%–90% |
| Display | 7-inch 2K Ultra-HD touchscreen |
| Control Software | PIOON Smart OS |
| Internal Storage | 16GB |
| Fiber Sizes | 200 µm, 300 µm and 400 µm |
| Fiber Connector | Standard SMA905 |
| Aiming Beam | 650nm, power below 2mW |
| Battery Capacity | 2850mAh |
| Power Supply | 18VDC 5A |
| Dimensions (L×W×H) | 225 × 150 × 150mm |
| Weight | Under 2 kg |
| Housing Material | ABS+PC housing with metal components |
The H1 Plus is housed in an ABS+PC enclosure with metal components, measuring 225 × 150 × 150mm and weighing under 2 kg. A 7-inch 2K Ultra-HD touchscreen forms the operating surface, with the laser console, 16GB storage and 2850mAh rechargeable battery integrated into one compact unit. Optical energy is delivered through a standard SMA905 fiber connector, and a 650nm aiming beam below 2mW marks the treatment target. Power is supplied at 18VDC 5A.
Clinical applications are subject to local regulatory requirements and approved indications.
PIOON supports OEM/ODM cooperation for medical laser systems, backed by an engineering team of 30–35 specialists working across optoelectronics, laser modules, embedded software and intelligent control systems. Distributors and clinics can discuss configuration, accessory and branding requirements with the PIOON team; scope and feasibility are confirmed per project.
Client type: Dental Clinic / Dental Distributor · Region: Global · Duration: at least 2 years
Engagement covered dental diode laser product demonstrations, clinical education and professional exchanges on soft tissue procedures, periodontal applications and laser-assisted dental treatments.
Result: the programme supported product demonstrations, clinical knowledge sharing and professional training activities, helping participating dental professionals better understand diode laser applications, device features and potential integration into clinical workflows.
What procedures can the H1 Plus support?
The 980nm wavelength is used for soft tissue surgery and gingival contouring, gingival troughing and implant uncovering, periodontal pocket treatment, root canal disinfection, adjunctive peri-implantitis treatment and aphthous ulcer management. Indications depend on local regulatory approval.
How does Super-Pulsed mode differ from Continuous Wave?
CW delivers steady output. Super-Pulsed uses ultra-short microsecond pulses, concentrating energy in short bursts with cooling intervals between pulses. Combined with CW and standard Pulsed modes and a 10%–90% adjustable duty cycle, this gives operators more control over energy delivery during delicate procedures.
Which fibers and connectors are compatible?
The device uses a standard SMA905 connector and accepts 200 µm, 300 µm and 400 µm optical fibers. Compatible dental fiber tips and optional foot pedals are available.
Is the unit portable, and how is it powered?
Yes. The console weighs under 2 kg at 225 × 150 × 150mm and includes a 2850mAh rechargeable battery, powered at 18VDC 5A. Operating time per charge depends on the power and mode settings used.
What training and software support is included?
The H1 Plus integrates a multimedia training system with educational videos, illustrated instructions and clinical guidance stored in 16GB internal memory. Direct Wi-Fi connectivity supports software updates and updated clinical parameter libraries.
What quality certifications apply?
PIOON operates under an ISO 13485:2016 quality management system certified by TÜV SÜD Product Service GmbH, and holds an EC Certificate (Full Quality Assurance System, MDD 93/42/EEC) covering its therapy laser / medical diode laser quality system. PIOON also holds U.S. FDA 510(k) clearance for a medical diode laser in general surgery, plastic surgery and dermatology. Applicable certificates vary by model and market; documentation is provided on request.
How do I get pricing, MOQ and lead time?
Pricing, minimum order quantity and lead time are quoted per configuration, accessory selection and destination market. Send your requirements through the inquiry details below and the PIOON team will respond with a commercial offer.
Request H1 Plus specifications and a quotation
Email: sales@pioon.com · WhatsApp: +86 18971249550 · Tel: +86 27 87001110
Wuhan Pioon Technology Co., Ltd. · 12th Floor, Building 1, Innovative Unit, R&D Center Project, Marine World Shipbuilding Park, No. 16, Fozuling 3rd Road, East Lake High-tech Development Zone, 430205, Wuhan, Hubei, China
Website: www.pioon.com




