Y Mobile a It mixing plant

Cold aggregate feeding system 1.Belt feeder adopts frequency conversion speed regulation, wide speed regulation range, high working efficiency. 2.Each outlet has a material shortage alarm device, no material or arch automatic alarm. 3.The sand box is equipped with vibrator to ensure normal operation. 4.Screen is set at the top of cold aggregate bucket to avoid large amount of feeding. 5.Conveyor belt adopts seamless circular belt, smooth operation, long service life. 6.The input port of the feed belt conveyor is equipped with a simple screen to avoid large amount of material input, improve the thermal efficiency, and ensure the reliability of the drying drum, hot aggregate hoist and vibrating screen. 7.Legs with supporting bases to ensure adequate stability. Drying system 1.Optimized blade geometry of dryer, making drying and heating process extremely efficient, reducing energy consumption, heating efficiency 30% higher than conventional design; Due to the high heating efficiency, the roller surface temperature is relatively low, so the cooling time after operation is greatly shortened. 2.Fully insulated and composite aggregate drying drum. The support roller is driven by polymer friction between the motor and the gear. 3. Adopt famous brand Honeywell temperature intelligent control system. 4.Use Italian brand burner with high combustion efficiency to ensure low exhaust emissions (such as co2, low NO1 and NO2, sulfur dioxide). 5.Diesel, heavy oil, natural gas, coal or multi-fuel burners. 6.Using international standard parts, low maintenance cost. 7.Integrated high efficiency burner on a mobile chassis. Stirring tower 1.Integrated shaker and heat storage, weighing and agitator in mobile chassis for easy transport and installation. 2.Improve vibration and amplitude to optimize the impact on available screens. The optimal combination of vibration direction and inclination Angle of screen box ensures screening ratio and screening efficiency. 3.The famous brand TOLEDO weighing sensor is adopted to ensure the accurate weighing and the quality of asphalt mixture. 4.The mixer is a 3D hybrid design with a series of long arms, short shaft diameters and bi-directional mixing blades. 5.Discharge process has been completely redesigned with minimum discharge time. 6.The distance between the blades and the bottom of the mixer is also limited to the optimal minimum. 7.A pressurized asphalt pump evenly sprays asphalt onto aggregate from multiple points to achieve full coverage and high mixing efficiency. 8.Legs with supporting bases to ensure adequate stability. High lights 1.Capacity from 80t/h to 160t/h 2.Produce different type asphalt mixing materials 3.Compact and modular for easy install and transport 4.Easy to operate and maintenance 5.Wide range of application