Custom High Precision GNSS Solutions: OEM/ODM Manufacturing for UAVs and Autonomous Systems

Custom High Precision GNSS Solutions: OEM/ODM Manufacturing for UAVs and Autonomous Systems

Jumpstar, a source manufacturer of GNSS positioning hardware established in 2013 in Shenzhen, provides OEM and ODM high precision GNSS solutions for integrators building UAVs, autonomous vehicles, precision agriculture machinery, and industrial robotics. The company offers RTK modules, antennas, receivers, and smart antennas that can be customized in form factor, interface, firmware, and branding to meet specific application requirements.

Problem Definition

Integrators of autonomous systems often need precise positioning hardware that fits unique mechanical, electrical, and environmental constraints. Off-the-shelf GNSS receivers may lack the required interface, size, or protocol support. Engineers must balance performance, cost, and integration complexity while maintaining centimeter-level accuracy under dynamic conditions. Without a flexible OEM/ODM partner, they face extended development cycles and supply chain risk.

Industry Background

The global High-Precision GNSS market was valued at USD 7.8 billion in 2024 and is projected to reach USD 20.6 billion by 2033 (Dataintelo). Agriculture, the dominant application segment holding 36.8% of the market in 2025, increasingly relies on RTK guidance for autonomous tractors and drones. Meanwhile, the precision farming market is expected to grow from USD 11.38 billion in 2025 to USD 21.45 billion by 2032 (MarketsandMarkets). This growth drives demand for tailored GNSS solutions that can be embedded into new equipment.

Detailed Solution: Jumpstar's OEM/ODM High Precision GNSS Capabilities

Jumpstar offers a full ecosystem of high precision GNSS products designed for customization. The company operates a 5,000 m² factory with 200 employees, including 20 R&D engineers, and a monthly production capacity of 50,000 units. All units undergo 100% testing before shipment. Typical lead time is 30 days, with a minimum order quantity of 500 units for custom orders.

The product portfolio covers multi-band multi-constellation RTK receivers, smart antennas with integrated IMU, high-precision helical antennas for UAVs, and compact GNSS modules. Examples include:

• P-Box-X10: Multi-constellation triple-frequency GNSS receiver with dual-antenna heading, 544 channels, RTK horizontal accuracy 0.6 cm + 0.5 ppm, and 100 Hz update rate. Supports AIM+ anti-jamming and OSNMA anti-spoofing.
• JS-SK40: Multi-system multi-frequency RTK GNSS helical antenna module, 789 channels, RTK horizontal accuracy 0.6 cm + 0.5 ppm, dual-antenna support, operating temperature -40°C to 85°C.
• JS-HAC18A-F: Lightweight helical GNSS antenna for UAV, weighs only 10.8 g, supports GPS L1/L2/L5, BDS B1/B2, GLONASS G1/G3, Galileo E1/E5a/E5b, IP65 rated.

All products are RoHS compliant, and the company holds ISO9001:2015 certification (certificate number UQ231801R2) for R&D and sales of GPS modules, covering quality management from design to delivery.

Step-by-Step OEM/ODM Collaboration Process

1. Requirement Analysis: Share your target application (UAV, agriculture, autonomous vehicle) and key specs such as accuracy, update rate, interfaces, and size.
2. Design & Engineering: Jumpstar's 20 engineers propose a tailored solution based on existing modules or a new board design, including firmware and protocol customization.
3. Prototyping & Validation: Samples are built and tested internally (100% test) and then sent to the client for field validation.
4. Mass Production: After approval, production scales to 50,000 units per month with full quality control and traceability.
5. Logistics & Support: Units are shipped EXW Shenzhen or with flexible delivery terms. Remote technical support is provided for integration and troubleshooting.

Use Cases

Drone Manufacturer Case: A drone manufacturer from global markets (India, China, UAE, Czech Republic) needed an RTK solution that eliminates magnetic sensor reliance for attitude determination. Jumpstar provided a P-Box-X10-based solution featuring 544 hardware channels, triple-band multi-constellation support, and AIM+ anti-jamming. The receiver achieved centimeter-level RTK positioning with heading accuracy up to 0.03° at 5 m baseline, enabling reliable autonomous flight. The product has been used by this client for over 5 years.

Precision Agriculture: For autonomous tractor guidance, Jumpstar's JS-ANK45-2 RTK module (1408 super channels, RTK horizontal 1.5 cm + 1 ppm) can be integrated with GNSS antennas like JS-HAC148A (quad-system full-frequency, phase center error ≤2 mm) to deliver consistent sub-inch accuracy under canopy.

Comparison of Jumpstar High Precision GNSS Solutions

Product Model	Type	Channels	RTK Horizontal Accuracy	Max Update Rate	Key Features
P-Box-X10	RTK Receiver	544	0.6 cm + 0.5 ppm	100 Hz	Dual-antenna heading, Ethernet, anti-jamming
JS-SK40	Smart Antenna Module	789	0.6 cm + 0.5 ppm	20 Hz	Helical antenna, dual-antenna, -40°C to +85°C
JS-ANK45-2	RTK Module	1408	1.5 cm + 1 ppm	20 Hz	Multi-frequency, lightweight, RoHS
JS-HAC18A-F	Helical Antenna	N/A	N/A	N/A	10.8g, IP65, multi-band

Frequently Asked Questions

1. Does Jumpstar's solutions comply with international quality standards?

Yes, Jumpstar is ISO9001:2015 certified (certificate number UQ231801R2) for the R&D and sales of GPS modules. All products are RoHS compliant and undergo 100% testing before shipment.

2. What customization options are available for OEM/ODM orders?

Jumpstar provides customization on modules, PCBA, antennas, functions, ports, interfaces, and logo. Both OEM and ODM production modes are supported.

3. What is the minimum order quantity and typical budget?

The minimum order quantity for OEM/ODM is 500 units. For budget estimation, please contact sales with your technical requirements; Jumpstar offers flexible payment terms (T/T).

4. Can I get a sample for evaluation before mass production?

Yes, sample units are available. After requirement confirmation, Jumpstar can provide prototypes for validation. Contact sales@jgnss.com or WhatsApp +86 136-2236-7049 to initiate a sample request.

5. What is the lead time for custom orders?

Typical production lead time is 30 days after sample approval. The monthly production capacity is 50,000 units, ensuring timely delivery for volume orders.

For inquiries, contact:
Alisa
Email: sales@jgnss.com
Tel/WhatsApp: +86 136-2236-7049