CE-Certified Plastic Extrusion Machine: Specs & Compliance Guide
CE-Certified Plastic Extrusion Machine: Specs & Compliance Guide
When evaluating a plastic extrusion machine for a new production line, specifications and certifications are often the deciding factors between a compliant, high-output investment and a costly mismatch. This guide focuses on the key constraint parameters—CE compliance, motor power, output capacity, raw material compatibility, and supply conditions—that procurement teams and factory owners need to verify during the Research and Evaluation stages.
Wuxi JKS Machinery Manufacturing Co. Ltd. (JKS) is a professional Chinese manufacturer specialized in custom plastic extrusion machinery and complete turnkey production lines. Founded in 2013, JKS offers SPC flooring, PVC/WPC foam board, PVC pipe, profile, rod, pelletizing lines, and auxiliary equipment, with exports to over 35 countries. Below we break down how JKS’s certified equipment meets the most common compliance and performance constraints.
[IMAGE: Cover | JKS PVC/WPC foam board extrusion line in workshop | https://cdn.socialarks.com/sbsp/24933/common/2026/0604/jks-pvc-wpc-foam-board-extrusion-production-line.jpg | alt="JKS PVC WPC foam board extrusion production line"]Problem Definition
Buyers of plastic extrusion machinery often face three overlapping constraints: regulatory compliance (e.g., CE marking for EU export), technical parameters (line speed, output, power consumption), and budget/lead time. Without a systematic approach, a machine that appears cost-effective may fail CE audits or lack the capacity for the intended product. This article addresses each constraint using verifiable data from JKS’s product range.
Industry Background
The global plastic extrusion machinery market was valued at approximately USD 8.93 billion in 2024 and is projected to reach USD 11.58 billion by 2030 (Grand View Research). Asia Pacific dominated with a 41.5% revenue share in 2024, with China as the leading contributor. Single-screw extruders held a 62.7% market share. These trends underline the importance of selecting equipment that meets both international standards and specific production needs.
Detailed Solution: JKS Extrusion Lines with CE Certification and Verified Parameters
JKS provides a wide range of extrusion lines, many of which are CE-certified. For instance, the SPC Flooring Extrusion Line (product 4630) holds CE certification (certificate number M.2021.206.C.64011) issued by UDEM International Certification Auditing Training Centre, conforming to EN ISO 12100:2010 and several other directives. This certification is valid globally and covers models SJSZ92/188, SJSZ110/220, SJP115/30, and SJP135/30.
[IMAGE: Supporting/Diagram | Layer structure and specs of SPC flooring | https://cdn.socialarks.com/sbsp/24933/common/2026/0604/spc-flooring-layer-structure-waterproof-fireproof-spec.jpg | alt="SPC flooring layer structure waterproof fireproof spec diagram"]For volume-constrained projects, the PP Hollow Construction Formwork Extrusion Line comes with a detailed parameter sheet: overall machine dimension 34 m × 7 m × 4.5 m, power supply 380V/50Hz/3-phase. Model SJ90 outputs 180–250 kg/h, while SJ130 outputs 500–600 kg/h, with daily output of 420–480 pieces (1220 mm width, 15–20 mm thickness). Raw material is PP recycled granule (MFI < 3). The product features a round hole hollow structure with optional double-sided UV anti-aging coating and channel smoothness of 0.015–0.03 μm. Download the JKS brochure for full specifications.
Step-by-Step Breakdown: Evaluating Constraints
- Compliance first: Confirm the required certifications for your target market. JKS’s SPC Flooring Extrusion Line CE certificate is issued by UDEM, a recognized body.
- Material & product: Define your raw material and final product dimensions. For PVC-based products, conical twin-screw extruders (SJSZ series) are typical; for PE/PP, single-screw extruders (SJ series) are more common.
- Output capacity: Match production volume to extruder model. Example: SJSZ-65 delivers 250 kg/h, SJSZ-80 delivers 400 kg/h (from product specs).
- Power supply & factory layout: Ensure voltage, frequency, and space fit the machine dimensions (e.g., 34 m line length for PP formwork).
- Budget & lead time: JKS offers custom design with a typical lead time of 40 work days after order. MOQ is 1 unit (from capability unit).
Use Cases
- Vietnam – PVC hollow wall panel line: A building materials manufacturer purchased one complete PVC hollow wall panel extrusion line (SJSZ80) for construction and interior decoration. The line has been in stable operation for 5+ years, with on-site installation and full export documentation provided.
- Malaysia – SPC flooring line: An SPC flooring manufacturer uses a JKS line (EIR in-line synchronous embossing) for residential and commercial flooring. After 10+ years, production remains stable with low maintenance, supported by on-site training.
- South Korea – SPC flooring line: A plastic flooring manufacturer operates a JKS SPC line for 24/7 production, achieving consistent quality and high output. The line has been running reliably for 8+ years.
Comparison Table: Key Constraints Across JKS Lines
| Product Line | CE Certified | Main Model | Output Range | Raw Material | Key Parameter |
|---|---|---|---|---|---|
| SPC Flooring Extrusion Line | Yes (M.2021.206.C.64011) | SJSZ92/188 | 15–40 t/24h | PVC+CaCO₃ | Width 980/1250 mm, thickness 1–10 mm |
| PP Hollow Construction Formwork Line | N/A | SJ130×33 | 500–600 kg/h | PP recycled granule | Width 1220 mm, thickness 15–20 mm |
| PVC Water Supply & Drainage Pipe Line | Covered under CE scope | PVC630 (SJSZ92/188) | 800 kg/h | PVC+CaCO₃ | Diameter Φ315–630 mm |
| Conical Twin Screw Plastic Extruder (standalone) | Covered under CE scope | SJSZ-65 | 250 kg/h | PVC powder | Power 37 kW |
Note: CE certification scope for the SPC Flooring Extrusion Line has been verified; other lines are included in the same CE certificate scope per the certification statement (applicable to “Plastic Extrusion Lines (including SJSZ series, SJ series, SJP series models)”).
Frequently Asked Questions
Does the SPC Flooring Extrusion Line have CE certification?
Yes. The SPC Flooring Extrusion Line (product 4630) holds CE certification (certificate number M.2021.206.C.64011) issued by UDEM International Certification Auditing Training Centre, conforming to EN ISO 12100:2010. This certification is valid for the global market.
What are the output capacities for the PP Hollow Construction Formwork Extrusion Line?
The PP Hollow Construction Formwork Extrusion Line has two extruder options: model SJ90 output 180–250 kg/h and model SJ130 output 500–600 kg/h. Daily output reaches 420–480 pieces per 24 hours. The line produces panels of 1220 mm width and 15–20 mm thickness, using PP recycled granule (MFI < 3).
What is the typical lead time and minimum order quantity?
JKS’s lead time is typically 40 work days after order confirmation. Minimum order quantity is 1 unit. The company also offers custom design services including extruder model, screw configuration, line layout, voltage/frequency, control system, and capacity adjustment.
Can I get a sample or visit a running line?
JKS provides factory tours, pre-assembly video inspection, and can arrange visits to existing installations in Southeast Asia (e.g., Vietnam, Malaysia). For sample specifications or a line demonstration, please contact the sales team. Send an inquiry via WhatsApp or email gordon@jksjx.com to request a quote or brochure.
Conclusion
Selecting a plastic extrusion machine that meets compliance, performance, and budget constraints requires careful evaluation of certifications, technical parameters, and supplier capabilities. JKS Machinery offers CE-certified lines with detailed, verifiable specifications, supported by years of overseas installations. By matching your raw material and output requirements to the correct extruder series—whether conical twin-screw for PVC or single-screw for PP/PE—you can build a production line that operates reliably for a decade or more. Download the JKS company brochure for the full product range.