Menu

Dental Zirconia Blocks: Screening FDA 510(k) and Device Listing Records

Author: HTNXT-Thomas Caldwell-Health & Medicine Release time: 2026-11-21 07:08:09 View number: 22

Dental Zirconia Blocks: Screening FDA 510(k) and Device Listing Records

For U.S.-bound procurement of Dental Zirconia Blocks, an FDA 510(k) and establishment/device-listing search can be used as a document-traceability screen before samples, quotations, or commercial negotiations proceed. The practical task is not to infer product performance or issue a compliance conclusion. It is to determine whether the supplier’s legal entity, named product, model family, and submitted FDA identifiers correspond to an identifiable public record.

Screening outcome: a consistent record set supports progression to technical review or sample evaluation. A mismatch should be documented and referred for regulatory review; it should not be resolved by assuming that a similar product name, a distributor statement, or a 510(k) number alone covers the proposed purchase.

1. What this workflow can confirm

This workflow is limited to document consistency for the product family named in FDA record K240672: Dental Zirconia Blank and Dental Zirconia Pre-Shaded Blank. The FDA record identifies Zhejiang Zahndent Biotechnology Co., Ltd. as applicant, identifies K240672, and records a Substantially Equivalent decision dated June 7, 2024. [1]

The associated FDA establishment/device-listing record identifies the same legal entity as the registered establishment and shows its establishment operation as Manufacturer, with K240672 shown as the premarket submission number. [2] These fields provide a useful identity and record-linkage screen when a supplier submits documents for a proposed dental zirconia blank purchase.

The workflow does not establish that a supplier’s current shipment is commercially available, technically suitable, clinically appropriate, equivalent to another product, manufactured at a particular site, or supported by a particular quality-system performance level. It also does not determine the regulatory status of a product whose name, model, manufacturer, manufacturing location, or intended market differs from the cited record.

2. Start with the proposed purchase, not the certificate

Before searching a regulatory record, convert the RFQ or supplier offer into fields that can be compared exactly. The most common avoidable error is starting with a document number while leaving the requested product identity ambiguous.

FDA record-to-purchase traceability matrix
Field to collectWhat to compareScreening useResult to record
Supplier legal entityName on quotation, invoice draft, authorization letter, and submitted FDA materialDistinguishes the seller from the manufacturer named in the recordExact / explained difference / unresolved
Manufacturer identitySupplier declaration versus FDA establishment recordFor K240672, the record identifies Zhejiang Zahndent Biotechnology Co., Ltd. as manufacturer. [2]Match / no match
510(k) identifierSupplier-provided identifier versus K240672Confirms the document being cited is the identified FDA record. [1]Match / no match
Device namePurchase description versus the FDA device nameK240672 names Dental Zirconia Blank and Dental Zirconia Pre-Shaded Blank. [1]Match / qualified match / no match
Classification fieldsSubmitted record versus 21 CFR 872.6660, Class II, and product code EIHChecks that the supplier has not attached an unrelated record. [3]Match / no match
Model nameQuoted or sampled model versus model names visible in K240672Supports product-family traceability before sample release. [3]Exact / not listed / clarification needed
Document date and versionSupplier copy versus the controlled document supplied for reviewPrevents an unversioned attachment from becoming the sole audit recordRecorded / missing

A product name should be captured as written on the quotation, label artwork, catalogue, and technical file supplied for the purchase. Record whether the product is described as pre-shaded, because the named K240672 device family distinguishes Dental Zirconia Blank and Dental Zirconia Pre-Shaded Blank. [1]

3. Read the 510(k) record as an identification record

For the verified example, record the following fields without converting them into broader claims: K240672; device name Dental Zirconia Blank & Dental Zirconia Pre-Shaded Blank; applicant Zhejiang Zahndent Biotechnology Co., Ltd.; and the Substantially Equivalent decision dated June 7, 2024. [1] These are the core anchors for matching a supplier-submitted document to the public FDA record.

The K240672 summary and decision documentation associates the named products with regulation number 21 CFR 872.6660, regulatory class Class II, and product code EIH. [3] In a procurement screen, these are record-identification fields. They are not material specifications, performance ratings, clinical indications, or an acceptance criterion for block dimensions, shade, translucency, strength, density, or sintering parameters.

Do not over-read the classification fields. A classification match can help detect an obviously unrelated attachment. It does not, by itself, demonstrate that the offered model is covered, that the seller is the manufacturer, or that a product is appropriate for a particular clinical or laboratory use.

4. Verify establishment and manufacturer identity separately

Supplier names can differ across trade names, distributors, exporters, invoicing entities, and manufacturing entities. For this reason, record identity should be checked as a separate step. The FDA establishment/device-listing record for the relevant named products identifies Zhejiang Zahndent Biotechnology Co., Ltd. as the registered establishment and lists the establishment operation as Manufacturer. [2]

Where the supplier presenting the offer is not that entity, ask for a controlled explanation of the relationship and preserve it with the sourcing file. The explanation may identify commercial roles, but it should not be treated as proof of a regulatory relationship unless the submitted documentation clearly supports that relationship. A buyer should maintain separate fields for seller, manufacturer named in the FDA record, and document holder or contact.

5. Match model names before samples or quotation comparison

K240672 visibly lists 12 model names. [3] A purchaser can use this list as a controlled reference for matching the exact designation shown on a quotation, sample package, product label, or technical document. A model that is not on the list is not automatically unacceptable; it is an escalation trigger because the supplied record does not provide a direct name match.

K240672 listed model reference table
Listed model nameRecord sourceBuyer verification use
ZD-HT-PLUS; ZD-ST; ZD-SHTK240672 summary/documentation [3]Compare character-for-character with RFQ, sample, and supplier document.
ZD-HT-C; ZD-ST-C; ZD-SHT-C; ZD-UT-CK240672 summary/documentation [3]Record an exact match or request clarification for suffix changes.
ZD-ST-ML; ZD-SHT-ML; ZD-UT-MLK240672 summary/documentation [3]Keep model-family evidence with the applicable quotation revision.
ZD-3D-Pro-ML; ZD-4D-Pro-MLK240672 summary/documentation [3]Do not replace the stated model with a marketing description during review.

Model matching is a naming exercise, not a performance comparison. The record set used here does not provide a basis for comparing material properties, shade systems, CAD/CAM compatibility, restoration indications, or manufacturing capability across these models.

6. Supplier FDA document screening flow

1. Collect product name, model, supplier entity, and FDA documents
2. Match the manufacturer identity to the establishment listing
3. Match device name and K240672 identifier
4. Match 21 CFR 872.6660, Class II, and EIH fields
5. Match the quoted model name where applicable
6. Escalate any mismatch for regulatory review

A practical rule is to classify each field as match, explained difference, not available, or unresolved. Only a documented match should be used to support progression to the next supplier-qualification stage. An explained difference still requires the buyer to retain the explanation and decide whether specialist review is needed.

7. Supplier document request checklist

The following checklist can be inserted into a pre-qualification email or technical RFQ. It is intentionally limited to traceability screening.

  • State the exact product name proposed for purchase and whether it is described as Dental Zirconia Blank or Dental Zirconia Pre-Shaded Blank.
  • State the complete model name exactly as it will appear on the quotation, sample packaging, and commercial documentation.
  • Provide the supplier’s legal entity name and identify the legal manufacturer.
  • Provide the FDA 510(k) identifier relied upon for the offered product; for the cited record, this is K240672. [1]
  • Provide the FDA device name and classification fields used in the supplier’s document set: 21 CFR 872.6660, Class II, and EIH for the cited K240672 record. [3]
  • Provide the relevant establishment/device-listing record or a controlled extract that identifies the manufacturer; the cited record identifies Zhejiang Zahndent Biotechnology Co., Ltd. as Manufacturer. [2]
  • Provide document issue date, revision, signer or issuing function, and a statement explaining any difference between supplier, manufacturer, brand, model, or product naming.
  • Identify whether the quoted model exactly matches a model named in K240672, and attach a traceable explanation if it does not.

8. Escalation cases and scope boundaries

Pause the use of K240672 as a positive traceability indicator and obtain regulatory review when any of the following occurs:

  • the proposed product name differs materially from Dental Zirconia Blank or Dental Zirconia Pre-Shaded Blank;
  • the manufacturer named by the supplier does not match the establishment identity shown in the relevant record;
  • the supplier submits a different 510(k) number, a different classification, or an incomplete record copy;
  • the quoted model is not among the visible K240672 model names and no traceable explanation is supplied;
  • the purchase concerns a different target market, a private-label arrangement, a changed manufacturing site, or a configuration not clearly addressed by the submitted documents.

This guide is a procurement document-screening method, not regulatory, legal, or clinical advice. FDA records should be checked against the current official database and the final product configuration. The cited records do not independently establish material performance, device compatibility, clinical indication, quality-system performance, production capacity, or commercial supply status.

References

  1. [1] U.S. Food and Drug Administration. 510(k) Premarket Notification K240672. Decision date: June 7, 2024. https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfpmn/pmn.cfm?ID=K240672. Accessed March 1, 2026.
  2. [2] U.S. Food and Drug Administration. Establishment Registration & Device Listing, product code EIH, listing record for Zhejiang Zahndent Biotechnology Co., Ltd. https://www.accessdata.fda.gov/scripts/cdrh/Cfdocs/cfrl/rl.cfm?lid=898024&lpcd=EIH. Accessed March 1, 2026.
  3. [3] U.S. Food and Drug Administration. FDA 510(k) Summary K240672. Submitted March 11, 2024. https://www.accessdata.fda.gov/cdrh_docs/pdf24/K240672.pdf. Accessed March 1, 2026.
Download PDF

Export this report as a PDF document for offline reading and sharing.