Industrial 3D Scanner Verification Standards: ISO 10360-13 and VDI/VDE 2634 Part 3
Industrial 3D Scanner Verification Standards: ISO 10360-13 and VDI/VDE 2634 Part 3
For an industrial metrology 3D scanner used in dimensional inspection, an accuracy value should not be reviewed as a stand-alone sales specification. The buyer should require the supplier to identify the verification reference associated with that claim and provide the associated verification documentation. This creates a reviewable connection between the proposed non-contact optical measurement system, its stated performance, and the basis on which that performance was established.
Why verification references matter in industrial 3D scanner procurement
A headline claim such as “accuracy,” “precision,” or “high accuracy” does not by itself define an acceptance basis. It does not tell a quality manager which scanner configuration was evaluated, what verification reference was used, what conditions applied, or whether the reported result is relevant to the intended inspection task.
The practical procurement question is therefore not simply whether a supplier states an attractive performance figure. It is whether the supplier can identify the reference behind the figure and provide documentation that allows the buyer to review the claim in context. This is especially important where scanner proposals use different terminology or cite different verification approaches.
A disciplined documentation request helps prevent two common mistakes:
- treating a stated performance value as directly comparable when its verification basis has not been identified; and
- treating a reference to a standard or technical guideline as if it were a product certification, listing, or automatic statement of suitability for a specific production task.
Neither ISO 10360-13 nor VDI/VDE 2634 Part 3 should be used in this guide as a substitute for application-specific acceptance criteria. Their value here is as a structured reference point for asking what verification basis supports a supplier’s claim.
Product scope: non-contact optical 3D coordinate measuring systems
This guide is limited to non-contact optical 3D coordinate measuring systems used for industrial dimensional measurement and inspection. It does not rank scanner models or prescribe suitability for a particular part size, material, surface finish, production rate, or operating environment.
The product boundary matters because a verification reference should be relevant to the proposed measurement technology. ISO 10360-13:2021 is specifically identified for non-contact optical 3D coordinate measuring systems. [1] VDI/VDE 2634 Part 3 is identified for area-based optical 3D scanners. [1] A buyer should therefore record whether the proposed system falls within the supplier’s stated interpretation of the relevant technology scope before relying on a cited reference.
ISO 10360-13:2021 for optical 3D coordinate measuring systems
ISO 10360-13:2021 is identified as the first ISO standard specifically for non-contact optical 3D coordinate measuring systems. [1] For procurement teams, its principal value at the early qualification stage is that it gives suppliers and buyers a common reference to identify when discussing the verification basis for an optical 3D measurement claim.
The correct RFQ use is not to write a broad statement such as “scanner must be ISO certified.” Instead, ask the supplier to state clearly whether a particular published or quoted claim is associated with ISO 10360-13:2021, and to provide the associated verification documentation. The buyer can then review the document version, the scanner configuration to which it applies, and any conditions that the supplier identifies.
Questions to place beside an ISO reference
- Which supplier-stated measurement claim is associated with ISO 10360-13:2021?
- Does the documentation identify the proposed scanner model and relevant configuration?
- What is the document title, version, date, and issuing party?
- Are conditions, exclusions, or application boundaries identified by the supplier?
- Is the cited reference being presented as a verification basis, rather than as a product certification claim?
VDI/VDE 2634 Part 3 for area-based optical 3D scanner verification
VDI/VDE 2634 Part 3 is identified as a widely used technical guideline for verifying the accuracy of area-based optical 3D scanners. [1] In a proposal review, this reference can help a buyer distinguish an area-based optical scanner verification statement from an unsupported general assertion of performance.
Where a supplier cites VDI/VDE 2634 Part 3, the buyer should request a direct explanation of the relationship between the cited guideline and the specific performance claim in the proposal. The supplier should also identify the document being provided to support that relationship. This is a documentation-control task: the procurement record should show what was claimed, what reference was identified, what supporting document was received, and which questions remain open.
| Reference | Identified scope | Scanner technology relevance | Procurement use |
|---|---|---|---|
| ISO 10360-13:2021 [1] | Identified as the first ISO standard specifically for non-contact optical 3D coordinate measuring systems. | Non-contact optical 3D coordinate measuring systems. | Ask the supplier to identify whether the stated claim is verified against this reference and provide associated documentation. |
| VDI/VDE 2634 Part 3 [1] | Identified as a widely used technical guideline for verifying accuracy. | Area-based optical 3D scanners. | Ask the supplier to explain how the claimed performance and supporting verification document relate to this guideline. |
The table identifies reference relevance for documentation review. It does not establish detailed procedures, numeric limits, or equivalence between references.
How to review a supplier accuracy claim
A useful review process keeps the measurement claim, the verification reference, and the supporting document together. Do not allow an unqualified performance value to become an implied acceptance criterion merely because it appears in a brochure, quotation, or presentation.
| Review field | What the buyer should request or record | Review status |
|---|---|---|
| Supplier-stated measurement claim | Quote the claim exactly as stated in the proposal or technical document. | Received / missing / clarification required |
| Identified verification reference | Identify ISO 10360-13:2021, VDI/VDE 2634 Part 3, or another reference expressly stated by the supplier. | Identified / not identified |
| Technology-scope statement | Record whether the proposed system is described as a non-contact optical 3D coordinate measuring system or an area-based optical scanner, as applicable. | Confirmed / unclear |
| Supporting verification document | Request document title, version, date, issuer, and the specific claim it supports. | Received / pending |
| Open clarification | Record conditions, exclusions, or unresolved links between the proposal and the documentation. | Closed / open |
RFQ and pre-acceptance documentation checklist
The following checklist can be copied into an RFQ, technical bid evaluation, or pre-acceptance file. It is intentionally a documentation template rather than a test specification.
- Intended measurement use: State the dimensional-inspection or quality-control use being evaluated.
- Scanner identification: Record the proposed scanner model and configuration as stated by the supplier.
- Measurement claim: Require every stated performance claim to be reproduced in the supplier response.
- Verification reference: Require the supplier to identify the reference associated with each stated claim.
- Scope relationship: Require the supplier to state why the proposed non-contact optical or area-based scanner is within the relevant scope described in its documentation.
- Supporting document: Request the associated verification document, including title, version, date, and issuing party.
- Review record: Assign a reviewer status of accepted for review, incomplete, or clarification required.
- Acceptance separation: Keep plant-specific pass/fail limits separate until validated test-method and uncertainty information is available for the intended application.
What this guide does not set
This guide supports a narrow but useful decision: identifying the verification reference and documentation that should accompany an industrial optical 3D scanner performance claim. It does not define permissible measurement-error limits for a particular scanner or application.
Scanner suitability still depends on the intended measurement task, part geometry, surface condition, environment, software workflow, and the supplier’s documented verification conditions. The current edition and applicable scope of each referenced document should be confirmed before a purchase order is placed.
Buyers can use the specification and qualification fields in this guide to structure a technical RFQ and compare supplier responses on a consistent basis.
References
[1] International Organization for Standardization (ISO). ISO 10360-13:2021 Geometrical Product Specifications (GPS). 2021. https://www.iso.org/standard/70233.html. Accessed November 20, 2026.
Export this report as a PDF document for offline reading and sharing.
