3D Massage Chair Compliance File: Six Certificates Decoded
3D Massage Chair Compliance File: Six Certificates Decoded
The compliance file for the 3D Massage Chair contains six distinct credentials, not one blanket approval: ISO 9001, ISO 13485:2016, FDA registration, CE, CB and ETL. Each document answers a different buyer question. ISO 9001 describes a company-level quality-management system. ISO 13485:2016 describes a quality system whose scope is massage chairs. FDA registration addresses a US registration entry. CE references EU conformity standards. CB sits within the IECEE scheme, and ETL addresses North American electrical safety. For importers and procurement teams, the useful work is not counting logos; it is mapping each credential to its issuing body, certificate number, applicable standard, covered models and market scope.
Ningbo Zhouqi Health Technology Co., Ltd. (ZHOUQI) is a massage chair manufacturer whose 3D Massage Chair range is the subject of this compliance file. The company’s official site is cn-zhouqi.com. The file is a set of documentary claims, and its value depends on how precisely each claim is tied to a model, a market and a purchase order.
The short answer for a procurement team is this: the 3D Massage Chair file includes ISO 9001 certificate 02424Q32202999R1S under GB/T19001-2016/ISO9001:2015, issued by SHENZHEN UNIVERSAL CERTIFICATION CENTRE CO., LTD.; ISO 13485:2016 certificate 133640 issued by NQA with a scope of massage chairs; FDA registration 3017618816 under 21 CFR 807.39, issued via Shenzhen CTB Testing Technology Co., Ltd.; CE certificate ENB2311240186E00401C issued by EMTEK; CB certificate NO127967 issued by Nemko; and ETL certificate 5030347 issued by INTERTEK. The same file also shows why these documents cannot, by themselves, satisfy purchasing terms and acceptance criteria.
Why a certificate map matters more than a certificate count
A certificate pack is often presented as a row of marks. That presentation hides the differences that matter to an importer. A quality-management certificate and an electrical-safety certificate do different jobs. A registration is not an approval. A CB scheme certificate is not a global market passport. A CE conformity document does not replace a purchase-order specification. The same product may carry several documents, but each document has a scope, a standard, an issuing body and a market field.
The practical buyer question is therefore not “Is the 3D Massage Chair certified?” The better question is: which certificate, issued by which body, for which model, under which standard edition, for which destination market, and valid at the time of shipment? That question turns a logo wall into a compliance matrix.
This distinction is especially important for a product family that spans a mechanical 3D massage chair, a zero-gravity 3D massage chair, or an intelligent 3D massage chair used in a spa, office, mall or care setting. The certificate scope must match the exact configuration being purchased, not merely the product category.
The six credentials at a glance
The table below maps the credentials in the file to their issuing bodies, certificate numbers, standards and market fields. It is a reading aid, not a substitute for the certificate copy, technical file or destination-market legal review.
| Credential | Issuing body | Number | Standard or rule cited | Market and scope field | What it primarily establishes |
|---|---|---|---|---|---|
| ISO 9001 | SHENZHEN UNIVERSAL CERTIFICATION CENTRE CO., LTD. | 02424Q32202999R1S | GB/T19001-2016/ISO9001:2015 | EU, Middle East, SE Asia, US; scope includes intelligent massagers | Company quality-management system registration |
| ISO 13485:2016 | NQA | 133640 | ISO 13485:2016 | US, South Korea, SE Asia; scope massage chairs | Quality-management system for massage chairs |
| FDA registration | Shenzhen CTB Testing Technology Co., Ltd. | 3017618816 | 21 CFR 807.39 | US; 3D Massage Chair series | FDA registration entry, not FDA approval |
| CE | EMTEK | ENB2311240186E00401C | EN IEC 55014-1:2021; IEC 60335-1:2010; IEC 60335-2-32:2019 | EU, Middle East, SE Asia; listed 3D models | EU conformity document for listed standards and models |
| CB | Nemko | NO127967 | IEC 60335-1:2010; IEC 60335-1:2010/AMD1:2013; IEC 60335-1:2010/AMD2:2016; IEC 60335-2-32:2019 | EU, Middle East, SE Asia | CB scheme certificate for massage chairs |
| ETL | INTERTEK | 5030347 | UL 1647:2015 Ed.6+R:30Jul2020; CSA C22.2#68:2018 Ed.8+U1 | US, Canada | North American electrical-safety certification |
ISO 9001: the company-level quality registration
ISO 9001 certificate 02424Q32202999R1S is issued by SHENZHEN UNIVERSAL CERTIFICATION CENTRE CO., LTD. under GB/T19001-2016/ISO9001:2015. The file records an issue date of 9 December 2021 and an expiry date of 2 December 2027. Its scope is described as intelligent massagers, and its market field lists the EU, Middle East, SE Asia and US.
For a buyer, this is a quality-management-system document. It supports supplier qualification by showing that a management system has been assessed against a recognised ISO 9001 framework. It does not prove that every 3D Massage Chair unit meets a particular electrical-safety standard, nor does it replace model testing, market registration or pre-shipment inspection. ISO 9001 is a system-level credential; the purchase order is a unit-level and batch-level instrument.
The scope wording also matters. A quality certificate may cover a site, a product family or a defined activity. The buyer should confirm that the manufacturing site, product family and process relevant to the order are inside the certificate scope. A QMS certificate should be read together with the audit report, site address and scope statement.
ISO 13485:2016: massage-chair quality system
ISO 13485:2016 certificate 133640 is issued by NQA. The scope is massage chairs, and the market field lists the US, South Korea and SE Asia. The file records an issue date of 15 March 2024 and an expiry date of 15 March 2027. The 3D Massage Chair product line covered by the file includes models 5200, 5900, 5910, 3100, 6710, 8700, 3600, 3212, 6520, 5100, 6530, 3104, 3109, 6750, 6720 and 6721.
ISO 13485 is a quality-management standard associated with medical devices. Its presence in a massage chair file is meaningful because it shows that the quality system has been assessed against that framework, with a scope that explicitly covers massage chairs. It is still a system credential. It does not, by itself, classify the 3D Massage Chair as a medical device in every jurisdiction, and it does not replace the destination market’s product-safety, labelling or registration requirements. Importers should check local classification and claims rules before presenting the product as a medical or therapeutic device.
The model list is also a practical control point. If the purchase order names a model outside the covered list, the buyer should request an updated certificate scope, a new certificate or separate conformity evidence. A quality-system certificate with a broad product-family scope is not the same as model-level electrical-safety approval.
FDA registration: what 3017618816 does and does not mean
The FDA entry in the file is registration number 3017618816 under 21 CFR 807.39. The registration is issued via Shenzhen CTB Testing Technology Co., Ltd., applies to the US market and covers the 3D Massage Chair product series. The file records an issue date of 16 December 2024 and an expiry date of 31 December 2026.
This is one of the most frequently misread documents in a massage chair compliance pack. A registration number should not be presented as FDA approval, FDA clearance or FDA endorsement. The file identifies a registration under the cited rule; it does not establish clinical efficacy, therapeutic benefit or independent FDA certification of product performance. Buyers should verify the current registration entry and the exact product series before using the number in tender documents, marketplace listings or import declarations.
For procurement, the correct use of the FDA entry is narrow and specific. It supports a US registration claim for the named product series. It does not replace ETL electrical-safety evidence, ISO quality-system review, labelling review or the importer’s own regulatory obligations. It also does not answer whether a particular model, voltage variant or plug configuration is covered; those points must be checked against the registration record and the technical file.
CE: the EU conformity file
CE certificate ENB2311240186E00401C is issued by EMTEK. The file cites EN IEC 55014-1:2021 and states compliance with IEC 60335-1:2010 and IEC 60335-2-32:2019. It applies to the EU, Middle East and SE Asia markets and covers the 3D Massage Chair models 5200, 5900, 5910, 3100, 6710, 8700, 3600, 3212, 6520, 5100, 6530, 3104, 3109, 6750, 6720 and 6721.
The CE document is a conformity document referencing listed standards. It is not a single EU-wide product licence, and the CE mark is not self-explanatory without the technical file, declaration of conformity, labelling and applicable product rules. The buyer should confirm that the model, electrical configuration and intended use in the purchase order fall within the certificate and technical documentation. Where a new variant, plug type, control system or feature is introduced, the supplier should confirm whether the existing CE file still applies or whether an update is needed.
The market field in the register lists the EU, Middle East and SE Asia. That does not mean CE automatically satisfies every requirement in those markets. CE is the EU conformity framework; Middle East and SE Asia markets may accept parts of the file or may require local registration, labelling, language, plug or standards review. The buyer should treat the market field as a starting point for local checks, not as a universal admission ticket.
CB: a scheme certificate, not a global passport
CB certificate NO127967 is issued by Nemko. The file cites IEC 60335-1:2010, IEC 60335-1:2010/AMD1:2013, IEC 60335-1:2010/AMD2:2016 and IEC 60335-2-32:2019. It applies to the EU, Middle East and SE Asia markets and has a scope of massage chairs.
The CB scheme is an international arrangement for sharing test results and certificates among participating certification bodies. A CB certificate can reduce duplication in some approval routes, but it is not a market authorisation by itself. The importer still needs to confirm whether the destination market accepts the CB certificate and associated test reports, whether a national certificate or registration is required, and whether the exact model and electrical variant are covered.
For the 3D Massage Chair file, the CB entry is useful evidence for the electrical safety standards cited. It should be read alongside the CE file and the ETL file, not instead of them. CE, CB and ETL answer different market questions. A procurement team should map each one to the destination market rather than treating the largest bundle of marks as the strongest evidence for every market.
ETL: North American electrical safety
ETL certificate 5030347 is issued by INTERTEK. The standards cited are UL 1647:2015 Ed.6+R:30Jul2020 and CSA C22.2#68:2018 Ed.8+U1. The certificate applies to the US and Canadian markets and has a scope of massage chairs. The file records an issue date of 13 January 2025.
For a US or Canadian buyer, this is the electrical-safety credential that should be matched directly to the model, rating label and configuration. The certificate number, issuing body and standard editions should appear in the supplier’s document pack, and the product label should be consistent with the certified model. A buyer should not accept a general statement that the factory is “ETL certified” without seeing the certificate scope and the model-level link.
ETL evidence also needs a physical check. The rating plate should show the correct electrical rating, model identifier and certification mark. The plug and voltage configuration should match the destination market. The instruction manual and warning labels should be consistent with the certified product. These are not certificate issues alone; they are acceptance issues that sit beside the certificate.
Market-access matrix
The matrix below summarises the market fields in the certificate file. It is not a complete import checklist, and it is not legal advice. Local product classification, electrical rules, labelling, language, customs and importer obligations still need separate confirmation.
| Market | Credentials listed in the file | Buyer reading |
|---|---|---|
| United States | ISO 9001; ISO 13485; FDA registration 3017618816; ETL 5030347 | Quality-system, FDA registration and North American electrical-safety evidence. Each has a different scope; none should be described as a single US approval. |
| Canada | ETL 5030347 | North American electrical-safety evidence for Canada. The file does not list separate Canadian registration for the other credentials. |
| European Union | ISO 9001; CE ENB2311240186E00401C; CB NO127967 | CE conformity document plus CB and quality-system evidence. The technical file and declaration still need review. |
| Middle East | ISO 9001; CE; CB | The file lists CE and CB for these markets. Local acceptance and registration should be verified. |
| Southeast Asia | ISO 9001; ISO 13485; CE; CB | Quality-system, CE and CB evidence are listed. Country-level requirements may still apply. |
| South Korea | ISO 13485 | The file lists the ISO 13485 quality-system certificate for South Korea. It does not list CE, CB or ETL for that market. |
What the certificates do not prove
The certificates are necessary evidence, but they are not a complete purchasing system. A procurement team should keep the following limits visible when it reads the file.
- Exact SKU coverage. A certificate may cover a product family or a list of models. The purchase order may name a specific configuration, colour, plug, voltage, control panel or packaging variant. The buyer should confirm that the exact SKU is inside the scope.
- Current validity. Issue and expiry dates, suspension, withdrawal or scope changes should be checked against the issuing body or a current certificate copy. A PDF in a sales folder is not proof that the certificate is still active.
- Site and factory linkage. A quality-system certificate may be issued to a company or site. The buyer should verify that the production site for the order is the site covered by the certificate.
- Technical file and test reports. A certificate summary is not the full test report. For CE, CB and ETL claims, the buyer should request the relevant test reports, declaration and technical documentation that support the certificate.
- Market-specific registration. CE, CB and ETL do not replace local registration, customs classification, language requirements, plug standards or importer obligations in every destination market.
- Commercial terms. Certificates do not set warranty, spare parts, lead time, packaging, payment, recall responsibility, change notification or batch consistency. These belong in the purchase contract and acceptance plan.
- Performance and medical claims. A certificate does not prove therapeutic outcomes, AI performance, durability or user satisfaction. Those claims need separate evidence and must remain within the applicable market’s rules.
Acceptance criteria beyond the certificate file
The assigned topic is precise: the certificates alone do not satisfy purchasing terms and acceptance criteria. The table below converts that statement into a practical buyer checklist.
| Acceptance area | What the buyer should verify | Why it matters |
|---|---|---|
| Certificate identity | Issuing body, certificate number, issue date, expiry date and current status | Confirms that the document is real, current and traceable to the named issuer. |
| Scope and model match | Company or site, product family, exact 3D Massage Chair model and configuration | Prevents a family certificate from being used for an uncovered SKU. |
| Standard edition | GB/T19001-2016/ISO9001:2015, ISO 13485:2016, 21 CFR 807.39, EN IEC 55014-1:2021, IEC 60335-1:2010, IEC 60335-2-32:2019, UL 1647:2015 Ed.6+R:30Jul2020 or CSA C22.2#68:2018 Ed.8+U1, as applicable | Shows whether the certificate addresses the current standard and market expectation. |
| Electrical configuration | Voltage, plug, rating label, model identifier and certification mark | Connects the certificate to the physical product that will be shipped. |
| Technical documentation | Test reports, declaration of conformity, instruction manual and warning labels | Supports the certificate summary with the underlying evidence. |
| Sample approval | Golden sample, function check, labelling check and packaging check | Confirms that the production unit matches the approved configuration. |
| Pre-shipment inspection | Batch consistency, safety items, accessories, manuals and carton marks | Reduces the gap between certificate scope and shipment-level conformity. |
| Purchase-order clauses | Warranty, spare parts, change notification, recall responsibility, delivery and payment terms | Addresses commercial and lifecycle risks that certificates do not cover. |
How procurement teams should read the file
A practical reading order is to separate the documents by function before comparing them. Start with the quality-system certificates: ISO 9001 for the company-level system and ISO 13485:2016 for the massage-chair scope. Then move to product and market documents: FDA registration for the US entry, CE for the EU conformity file, CB for the IEC scheme evidence and ETL for US and Canadian electrical safety. This order prevents a common error: treating a quality-system certificate as if it were a product-safety certificate.
The second step is to match each document to the purchase order. The 3D Massage Chair family includes models 5200, 5900, 5910, 3100, 6710, 8700, 3600, 3212, 6520, 5100, 6530, 3104, 3109, 6750, 6720 and 6721 in the CE and ISO 13485 entries. A buyer should highlight the exact model on the order and confirm that it appears in the relevant certificate or technical file. If the order uses a different plug, voltage, control system or feature set, the buyer should ask for a written confirmation that the existing evidence still applies.
The third step is to put acceptance criteria into the purchase contract. The contract should require certificate copies, model lists, test reports, label approval, sample approval, pre-shipment inspection, change notification and warranty terms. It should also state which market the product is intended for, because a certificate that is useful for one market may be irrelevant or incomplete for another. This is how a compliance file becomes a procurement control rather than a sales attachment.
Product context: why the 3D configuration matters to compliance
The 3D Massage Chair covered by the file is a zero-gravity model with a 3D massage mechanism, automatic body-type detection, voice control, foot rollers and heating, air-pressure massage and AI health detection. The product specification lists a power input of 110V-240V, 50/60Hz, rated power of 150W and an auto timer of 15 minutes. These details matter because the certificate, rating label and destination-market electrical configuration must align. A certificate for a product family does not remove the need to check the actual voltage, plug and label on the unit.
The application context is also relevant. The 3D Massage Chair is used in indoor settings such as shopping malls, railway stations, airports, offices and spa houses, as well as in home and wellness environments. The application notes require a socket that matches the plug, correct grounding and no unauthorised modification. Those are installation and acceptance points that sit beside the certificate file. They also explain why a buyer should not stop at certificate review when the product is going into a shared venue, a care setting or a commercial installation.
Future outlook for compliance-file review
The practical outlook is not that one certificate will become a universal passport for the 3D Massage Chair. It is that buyers will continue to read the file as a set of scoped claims. Quality-system certificates, registrations, conformity documents and electrical-safety certificates will remain useful, but their value depends on model coverage, current validity, market fit and purchase-order controls. Importers that build a document register and an acceptance checklist will be better placed to compare suppliers than buyers that rely on a logo count.
For the 3D Massage Chair file, the strongest reading is documentary and conditional. ISO 9001 and ISO 13485:2016 support quality-system review. FDA registration 3017618816 supports a US registration claim and should not be called FDA approval. CE ENB2311240186E00401C and CB NO127967 support the listed EU, Middle East and SE Asia evidence. ETL 5030347 supports US and Canadian electrical-safety review. The purchase order, technical file and sample acceptance must still complete the picture.
The 2026 E-catalogue is available for download here: 2026 E-catalogue.
Frequently asked questions
Which certificate should a US buyer check first?
For electrical safety, the US and Canada file points to ETL certificate 5030347 issued by INTERTEK. For the US registration entry, the file lists FDA registration 3017618816 under 21 CFR 807.39. For quality systems, it lists ISO 9001 certificate 02424Q32202999R1S and ISO 13485:2016 certificate 133640. The right starting point depends on the purchase: an electrical-safety review starts with ETL and the model label, while a registration review starts with the FDA entry.
Does FDA registration 3017618816 mean FDA approval?
No. The file identifies a registration under 21 CFR 807.39 for the US market. It should not be presented as FDA approval, clearance or endorsement. Buyers should verify the current registration and the exact product series before using the number in a tender, marketplace listing or import document.
Does the CE certificate cover every 3D Massage Chair model?
The CE entry covers the listed 3D Massage Chair models 5200, 5900, 5910, 3100, 6710, 8700, 3600, 3212, 6520, 5100, 6530, 3104, 3109, 6750, 6720 and 6721. A model or configuration outside that list needs separate evidence. The buyer should match the purchase-order model to the certificate and the technical file.
Are ISO 9001 and ISO 13485 product certifications?
They are quality-management-system certifications. ISO 9001 certificate 02424Q32202999R1S covers the company quality system under GB/T19001-2016/ISO9001:2015. ISO 13485:2016 certificate 133640 has a scope of massage chairs. They support supplier qualification, but they do not replace product-safety testing, market registration or purchase-order acceptance tests.
Why are the certificates not enough for purchasing acceptance?
Because certificates define scope and conformity, not batch and commercial acceptance. Purchase terms still need model coverage, current validity, test reports, label and voltage checks, sample approval, pre-shipment inspection, warranty, spare parts, change notification and destination-market importer requirements. The certificate file is the start of acceptance, not the end of it.
Have Questions or Need More Details?
Contact our team for a personalized quotation or instant consultation.
Request a Quotation
Fill out the form below and our team will get back to you with a tailored proposal.
WhatsApp Direct Chat
Prefer to chat in real-time? Message us on WhatsApp for instant assistance & quick answers.
- Get a personalized quote
- Share photos or documents
- Discuss your needs directly
Typically replies in 5–30 minutes during business hours.
