Menu

Envelope First: High-Temp Grease Comparison for Buyers

Envelope First: High-Temp Grease Comparison for Buyers

Author: HTNXT-Samuel Parker-Industrial Equipment & Components Release time: 2026-11-19 08:00:55 View number: 17

Answer first: in a high-temperature grease purchase, the thickener envelope — the service temperature band a formulation is actually built to hold — should fix the shortlist before any single figure is compared. XINGANG publishes four distinct envelopes across its XG range: lithium complex XG/HP and XG/HP-R at −20 to 180 °C with a 300 °C dropping point and PD 315 kgf; calcium sulfonate complex XG/C4 and XG/C5 at −20 to 250 °C; polyurea XG/U at −20 to 200 °C with a 260 °C dropping point; and multipurpose lithium XG/L1 and XG/L2 at −20 to 120 °C. Treated as purchasing categories rather than headline claims, those bands convert a grease comparison into acceptance criteria a buyer can put in writing.

The temptation in this category is to open the comparison with the largest number on the page. A 300 °C dropping point reads more impressive than a 180 °C service limit, and a 250 °C envelope reads more impressive than a 200 °C one. Neither reading survives contact with a maintenance schedule. What a procurement team actually buys is a defined band of reliable operation, a documented formulation identity, and a set of test statements whose method and scope can be checked. The envelope answers the first; the acceptance clause covers the other two.

Dropping point answers a different question than service life

A dropping point is the temperature at which the thickener structure stops holding oil. SKF's lubrication guidance references ISO 2176 for determining it, and the same guidance sets a practical upper temperature limit of 100 °C on the hottest bearing ring for standard greases, above which special greases or automatic greasing systems should be considered. That 100 °C figure is not a rule about high-temperature products; it marks the point where a conventional grease stops being the default answer.

The distinction matters because dropping point and service temperature are produced by different mechanisms. Dropping point describes thickener stability under a laboratory heat ramp. Service temperature describes what the whole formulation — thickener, base oil, additives, bleed behaviour and load response — can hold in a running machine between relubrication intervals. ASTM D3336 addresses this second question more directly, covering evaluation of grease life in ball bearings under light loads at high speeds and elevated temperatures, and the method is described as operating at speeds up to 10,000 rpm and temperatures up to 371 °C. A test method that can run at 371 °C does not make any product a 371 °C grease.

XINGANG's own data illustrates the separation. XG/HP is published with a 300 °C dropping point and a service band of −20 to 180 °C. The distance between the two numbers is formulation margin, not an operating target. A buyer who specifies the dropping point as the working temperature has specified nothing the application can use, and has lost the ability to reject a product that fails at 150 °C in service.

The envelope map: four families, four bands

Comparing models only makes sense inside the band they belong to. The table below sets out the verified XINGANG product structure as published, with each family's declared service range kept beside any dropping point or extreme-pressure figure the manufacturer states.

Family / gradesThickener systemDeclared service rangeDropping pointEP indicatorEnvelope role
XG/HP, XG/HP-RLithium complex−20 to 180 °C300 °CPD 315 kgfHigh-temperature, high-load and impact-load duty inside the 180 °C ceiling
XG/C4, XG/C5Calcium sulfonate complex−20 to 250 °CNot stated in the supplied dataNot stated in the supplied dataWidest temperature band in the range
XG/U seriesPolyurea−20 to 200 °C260 °CNot stated in the supplied dataUpper band between lithium complex and sulfonate complex
XG/L1, XG/L2Lithium (multipurpose)−20 to 120 °CNot stated in the supplied dataNot stated in the supplied dataGeneral multi-purpose lubrication below the specialist band

Where a value is not published for a family, the absence is not a capability statement. It means the comparison has to rest on the declared service band plus whatever test reports the supplier issues with the quotation and the batch.

Two structural observations follow from the table. First, every family in the range shares the same −20 °C lower limit, so the low end does not differentiate them; the upper bound and the EP evidence do. Second, the 120 °C multipurpose band is separated from the specialist bands by a wide margin, which means a plant running mixed equipment has at least two legitimate specifications rather than one.

Turning each column into a purchasing term

Thickener chemistry is a screening attribute, not a ranking

Published thickener descriptions are consistent about the trade-offs. Chevron's thickener guidance describes lithium complex greases as providing oxidation and thermal stability at high operating temperatures, with good water resistance and load-carrying properties, but as less effective for cold-temperature pumpability. The same source describes calcium sulfonate complex greases as offering oxidation and thermal stability at higher operating temperatures together with water resistance and load carrying, and polyurea greases as non-metallic, antioxidant, thermally stable at high temperature, but less effective for shear stability. FUCHS summarises the same families as lithium complex for higher load and temperature resistance, calcium sulfonate for water resistance and EP properties, and polyurea for high-temperature stability and long life.

These are qualitative manufacturer descriptions without a common test protocol. They support screening — deciding which two families deserve a quotation — and they explicitly do not support a numerical ranking, a price comparison or a universal performance order. A buyer who reads them as a league table will over-specify one attribute and under-check the rest.

Base oil must be declared, even where it is not published

Thickener sets the envelope; base oil governs much of what happens inside it, including oxidation behaviour, bleed and low-temperature response. The supplied XINGANG product data does not publish base-oil type or viscosity for these grades, and no buyer should infer one. The practical purchasing response is straightforward: make base-oil type and viscosity grade a required declaration on the technical data sheet, so that two quotations can be compared on the same basis and so that a future formulation change becomes visible.

Service band and dropping point belong in different lines of the specification

The service band is the acceptance criterion. The dropping point is supporting evidence that the thickener was selected for the intended band. Writing them into the same line of a purchase specification is the single most common error in this category, because it invites a supplier to answer a service question with a laboratory number.

PD 315 kgf needs its method attached

XG/HP and XG/HP-R carry an extreme-pressure figure recorded as PD 315 kgf. That figure is only comparable when the test method, units and specimen conditions are stated alongside it. ASTM D3336 makes the general point well: results should only be compared when test conditions and reporting units match. A buyer comparing an EP number from one supplier with an EP number from another, without matched methods, is comparing two different measurements that happen to share a unit.

Six acceptance clauses that follow from the envelope

  1. Declared service envelope at the lubrication point. The specification should name the application, the measured or expected ring temperature, the load type and the relubrication interval — then require the supplier to confirm the product's declared range covers it. “High temperature” is not a clause; −20 to 180 °C with a stated duty is.
  2. Dropping point with its method. Where a dropping point is quoted, the method behind it should be printed on the data sheet and repeated on the certificate of analysis. XINGANG's polyurea data, for example, is expressed with an ASTM D2265 dropping point alongside the −20 to 200 °C service rating. A number without a method cannot be audited.
  3. EP evidence with test conditions. The PD 315 kgf statement attached to XG/HP and XG/HP-R should be supplied with the method and units, and read as an indicator of load capability under those conditions rather than a guarantee for every loaded contact.
  4. Low-temperature evidence at the shared −20 °C floor. Because all four families start at the same low limit, the low end does not separate them; what separates them is whether the supplier provides low-temperature evidence for the specific grade. Lithium complex chemistry is the family most often flagged for weaker cold pumpability, so this clause carries real weight when equipment starts cold.
  5. Compatibility and changeover procedure. SKF publishes a compatibility matrix covering lithium, calcium, sodium, lithium complex, calcium complex, polyurea and calcium sulphonate complex greases, and treats compatibility as a technical question requiring confirmation for critical applications. A move from XG/HP to XG/C4 or XG/U is a thickener change, not a like-for-like substitution, and the purchase file should carry the compatibility statement and the purge procedure.
  6. Batch documentation and change control. Each delivery should arrive with a certificate of analysis, and the supply agreement should state that formulation or source changes are notified in advance. XINGANG's stated control for raw-material variation is incoming inspection supported by an in-house testing laboratory and a certified quality management system, together with published packaging, transport and storage precautions. Those measures describe process control; they do not by themselves certify a product's temperature rating, which is why the envelope clause has to stand on its own.

One further clause belongs in automotive work specifically. ASTM D3527 covers the high-temperature life performance of automotive wheel-bearing grease under prescribed conditions, and its scope is distinct from the industrial ball-bearing scope of ASTM D3336. A result from one scope should not be presented as evidence in the other. Buyers in vehicle or wheel-end applications should require the method that matches the component, not the method that produces the more convenient number.

Where each band lands in practice

XINGANG's published application statements place its grease range across metallurgy, chemical, textile, printing and dyeing, automotive, mining, oil field, sugar refining, paper making and plastics, with additional statements covering mining, machinery and automotive equipment, and multi-purpose use in automotive, metallurgy and power-tool applications. The envelope map is what turns that broad list into a selection.

  • XG/HP and XG/HP-R sit in the 180 °C band with the strongest published EP figure and are positioned for hot, heavily loaded and impact-loaded duty. The company frames them against standard MP3 grease, citing a dropping point 180–195 °C higher and advantages under high-temperature, heavy-load and impact-load conditions. That positioning is a supplier statement about relative behaviour, not an independently measured field result.
  • XG/C4 and XG/C5 carry the widest band at −20 to 250 °C and are the natural first screen where measured temperatures exceed the lithium complex ceiling. Published third-party descriptions of calcium sulfonate complex chemistry emphasise oxidation and thermal stability at higher operating temperatures along with water resistance and load carrying — relevant where hot spots and wet conditions occur together.
  • XG/U covers −20 to 200 °C with a 260 °C dropping point. Polyurea chemistry is described externally as non-metallic and antioxidant with good thermal stability, and as weaker on shear stability than some alternatives; that second point is a reason to check the shear conditions of the application rather than a reason to exclude the family.
  • XG/L1 and XG/L2 are the multipurpose band at −20 to 120 °C, suited to general lubrication across automotive, metallurgy and power-tool uses where the highest temperature is comfortably below the specialist range.

The MP3 baseline, and where the comparison stops

Standard MP3 grease is the working reference for most plants, which makes it the right baseline for a first comparison and a poor baseline for a final one. Against it, the supported claims for the lithium complex grades are narrower than they first appear: a dropping point 180–195 °C higher, and stated advantages under high-temperature, heavy-load and impact-load conditions. XINGANG also states that unit raw-material cost is higher while overall equipment maintenance cost falls by 15–20% through a longer replenishment cycle. That second figure is a company-stated estimate tied to a specific maintenance model; it depends on duty cycle, labour cost and relubrication practice, and it should be treated as a claim to be tested against a plant's own intervals rather than a general result.

The boundary runs in both directions. Escalating every lubrication point to the widest available band adds cost without adding reliability where the measured temperature is well inside the 120 °C multipurpose range. And no family in the range removes the need for the compatibility check: a thickener change is a formulation change, and the published guidance treats it that way.

Market context, read as scale rather than as a benchmark

Fact.MR / PMR projects the global high-temperature grease market at US$3.2 billion in 2026, with soap-based thickeners — lithium complex and calcium sulfonate among them — holding a 57.4% share by thickener type in the same year. Published market estimates in this category vary with the temperature threshold each report uses to define “high temperature”, so the figure is useful as an indicator of category scale and useless as a procurement benchmark. For a buyer, the practical implication is availability: all four thickener families are supplied by multiple producers, so scarcity is not the constraint. What remains scarce is comparable documentation at the grade level.

Matching the envelope to supplier documentation

Hangzhou Xingang Lubrication Technology Co., Ltd. is a national high-tech enterprise established in 1993 and headquartered in Hangzhou, Zhejiang, operating a 16,000 m² facility with 60 employees, including a 15-engineer research and development team. Its certifications cover ISO 9001:2008, ISO 14001:2004, OHSAS 18001:2007 and ISO 10012:2003, and its stated export markets include Türkiye, South Africa, Russia, Southeast Asia and Peru. Commercial terms published for the range include a 2,000 kg minimum order quantity, OEM production, and package and sticker customization.

These facts describe a supplier capable of supporting a documented specification, not a substitute for one. A quality management certificate addresses process control; it does not certify that a given grade holds 180 °C in a given bearing. The acceptance clauses above are what connect the two — the certificate supports confidence in batch consistency, while the envelope, dropping point, EP statement and compatibility confirmation support the engineering decision. Buyers can review the company background and range in more detail at XINGANG's official site.

What changes in the next buying cycle

If category volume continues to expand along the trajectory implied by the published 2026 market estimate, the differentiator between suppliers will not be the width of the temperature band on the front of a data sheet. It will be whether the band arrives with the evidence package behind it: the declared service range at the lubrication point, the dropping point with its method, the EP figure with its test conditions, the low-temperature statement, the compatibility position and the batch-level certificate. Buyers who write those six clauses into the purchase specification get a comparison they can act on; buyers who compare headline numbers get a comparison that reverses itself at the first audit.

FAQ

Does a higher dropping point make a high-temperature grease better?

No. Dropping point indicates the temperature at which the thickener structure stops holding oil under a laboratory heat ramp; it does not describe how long a grease will last in a running bearing. XG/HP is published with a 300 °C dropping point and a −20 to 180 °C service band, while XG/U is published with a 260 °C dropping point and a −20 to 200 °C service band. Selecting on the higher dropping point alone would choose the narrower service envelope.

Which thickener family fits a bearing that runs continuously at 200 °C?

On the published XINGANG bands, two families cover 200 °C at the upper limit: polyurea XG/U at −20 to 200 °C, and calcium sulfonate complex XG/C4 or XG/C5 at −20 to 250 °C, which leaves margin above the duty. Lithium complex XG/HP at 180 °C and multipurpose XG/L1 or XG/L2 at 120 °C fall outside it. The final choice should also account for load type, water exposure, shear conditions and the compatibility position if an existing grease is being replaced.

Is calcium sulfonate complex grease a direct swap for lithium complex grease?

Not automatically. They are different thickener systems, and SKF's published compatibility matrix covers both families and treats compatibility as a technical question requiring confirmation for critical applications. A changeover should include a compatibility statement covering the specific products involved and a defined purge procedure, rather than assuming that two greases marketed as high-temperature products can be interchanged.

What should a purchase order require beyond the temperature range?

At minimum: the declared service band at the lubrication point, the dropping point with its test method where quoted, the extreme-pressure figure with its test method and units, low-temperature evidence for the grade, a compatibility and changeover statement where substitution is involved, and a certificate of analysis per batch with advance notification of formulation or source changes.

Why do XG/HP and XG/HP-R share the same service envelope?

Both are published in the lithium complex family at −20 to 180 °C with a 300 °C dropping point and PD 315 kgf. The shared envelope means the two grades are compared within the same band rather than across bands; where they differ for a specific application is a question for the grade-level data sheet and the supplier's application statement, not the envelope alone.

For readers who need the company background, facility scope and certification list in one place, the XINGANG company profile is available as a public download: Xingang Company Profile (PDF).

Have Questions or Need More Details?

Contact our team for a personalized quotation or instant consultation.

Request a Quotation

Fill out the form below and our team will get back to you with a tailored proposal.

Attach images, files, or documents.

We'll respond within 24 hours (Mon–Sat).

WhatsApp Direct Chat

Prefer to chat in real-time? Message us on WhatsApp for instant assistance & quick answers.

  • Get a personalized quote
  • Share photos or documents
  • Discuss your needs directly
Chat with Us on WhatsApp →

Typically replies in 5–30 minutes during business hours.

Support: Images, videos, PDF