Menu

10 Tonne Boom Crane Truck Attachment Built To Your Mounting Interface

Quantity:
SKU: 097016047X
Model: Crane Truck

{{ variable.name }}

{{ value.name }}
Attachment Build

10 Tonne Boom Crane Truck Attachment Built To Your Mounting Interface

A crane boom and attachment assembly built to the buyer mounting interface, dimensions and working conditions instead of a standard catalogue specification. A 10 tonne boom-crane attachment was tailor-made for a client in Ghana in December 2025 and shipped with installation guidance and operating instructions.

SEO Title: 10 Tonne Boom Crane Truck Attachment Built to Your Mounting Interface
Meta Description: 10 tonne boom crane attachment built to the client mounting interface, dimensions and lifting duty, supplied with installation guidance and spare parts.
URL Slug: /10t-tailor-made-boom-crane-attachment

Product Summary

Buyers who already own a chassis, a carrier or a fixed base order the boom and attachment as a unit rather than a complete crane truck. The referenced tailor-made attachment is rated at 10 tonnes and was delivered in December 2025; its dimensions, mounting arrangement and lifting capacity were defined by the customer site, so the specification is fixed at inquiry rather than taken from a catalogue. Beyond complete trucks, crane booms and attachments are built to the mounting interface, dimensions and working conditions the buyer supplies.

Ten tonne boom crane attachment mounted on a truck chassis
Boom and column assembly built to the client mounting interface.
Boom crane attachment with hydraulic outriggers on site
Hydraulic H-type outrigger legs carry the attachment on site.

Key Features

Capacity And Interface Set By The Site

The 10 tonne rating, the mounting arrangement and the dimensions of the referenced unit were defined by the client working conditions rather than a catalogue specification.

Welded Box-Section Structure

Boom, column and knuckle joints in Q345 or Q460 welded high-strength steel box section, with Q345 reinforcement plates at the pivot points.

Hydraulics Supplied For Local Repair

Open-centre system at 16-35 MPa with hard-chrome plated piston rods, and seal kits and hoses shipped as a spare-parts kit so a workshop without a dealer nearby can still repair the crane.

Safety On The Lifting Circuit

Load moment limiter available, pressure relief and check valves, and an alarm when an outrigger is not fully deployed.

Installation Guidance With The Unit

Installation guidance and operating instructions were supplied with the 10 tonne attachment, and the same support is quoted with each build.

Technical Specifications

ParameterSpecification
Build typeBoom and attachment to the customer mounting interface
Rated capacity10,000 kg on the referenced tailor-made unit
Mounting interface and dimensionsDefined by the customer site and confirmed at inquiry
Boom structureQ345 or Q460 welded high-strength steel box section, Q345 reinforcement at pivot points
Boom sections2-5 hydraulic extensions, fly jib optional
OutriggersHydraulic H-type legs in box section, full and partial spread quoted separately
ControlsManual lever bank at the crane base; proportional radio remote control optional
HydraulicsOpen centre, gearbox power take-off on truck-mounted builds, 16-35 MPa
SafetyLoad moment limiter available, pressure relief and check valves, outrigger alarm
Delivery of referenced unitDecember 2025
Warranty and lead time12 months for major components; about 30-45 working days from down payment
Export documents and termsInvoice, packing list, bill of lading, certificate of origin and insurance; FOB, CIF or DAP

Models and Options

  • Build scope: a complete crane truck on a 4x2, 6x4 or 8x4 chassis, or the boom and attachment only for an existing carrier.
  • Boom family: folding (knuckle), which stows inside the vehicle width, or straight (telescopic) for the higher vertical lift.
  • Capacity classes across the line: 2,000-25,000 kg rated capacity and 8-60 tonne-metres lifting moment.
  • Controls: manual lever bank at the crane base, or proportional radio remote control.
  • Equipment: 2-5 hydraulic extensions, fly jib optional, hydraulic H-type outrigger legs.
  • Finish: anti-corrosion primer plus polyurethane topcoat, galvanised bolts and stainless clamps.

Materials and Structure

The boom, column and knuckle joints are welded high-strength steel box section in Q345 or Q460 plate with Q345 reinforcement plates at the pivot points. Outrigger beams and legs are high-strength steel with cast or forged feet and nylon wear sliders; cylinders use honed steel tubes, hard-chrome plated piston rods and nitrile and polyurethane seals; hoses are two-wire braided rubber with crimped steel fittings.

  • Subframe on truck-mounted builds: Q345 channel or box section, bolted and welded to the chassis rails.
  • Fasteners and loose gear: galvanised bolts, stainless clamps and pins with grease nipples, rubber outrigger pads and polyester webbing slings.
  • Spare-parts kit: seal kits, hydraulic hoses, filters, control valves and rope for winch-equipped units.

Applications

  • Retrofitting an existing truck, trailer or base with a lifting capability instead of buying a second complete vehicle.
  • Contractors with a site-specific lifting duty where standard catalogue dimensions do not fit the mounting point.
  • Equipment rental and leasing fleets; container yards, freight depots and warehousing.
  • Utility and power line maintenance, municipal works and machinery moving or rigging work.

Customization

Dimensions, mounting arrangement and lifting capacity are defined by the client site. Sales engineers ask for the heaviest load, the longest radius, the carrier or base the attachment will sit on and the local rules on lifting equipment before the build is fixed. Export documents, FOB, CIF or DAP terms and RoRo or container shipment are arranged with the unit, and the hydraulic system is drained and protected for the sea passage.

Case Study

Two buyers in Ghana took 10 tonne boom crane attachments delivered in December 2025. The first is a contractor with a site-specific lifting duty: the structure, mounting arrangement and capacity were matched to the real working need rather than a catalogue specification, and at about 11 months in service the recorded highlight is an attachment matched to the client duty cycle. The second is an equipment owner upgrading an existing fleet, where the attachment was retrofitted to a unit already in service with a high-strength steel structure, a safety-focused design and installation guidance provided.

Tailor-made boom crane attachment prepared for export to Ghana
10 tonne attachment prepared for shipment, with installation guidance and operating instructions.
Boom crane attachment with column and pivot reinforcement in place
Column and pivot details reinforced with Q345 plates.

FAQ

Can I order the attachment without a complete truck?

Yes. The boom and attachment can be built to your mounting interface, dimensions and working conditions, so an existing carrier or base can be used.

How is the capacity decided?

From the heaviest load and the longest radius on your site. The referenced unit is rated at 10 tonnes; capacity is always quoted together with the radius that applies.

What is supplied with the attachment?

Installation guidance and operating instructions, plus a spare-parts kit with seal kits, hydraulic hoses, filters, control valves and rope for winch-equipped units.

What are the lead time and delivery record?

About 30-45 working days from down payment; the referenced 10 tonne attachment was delivered in December 2025.

What does the warranty cover?

12 months for major components, with hydraulic valves and cylinders covered under supplier terms.

Which trade and shipping terms are used?

FOB, CIF or DAP, by RoRo or container depending on unit height, with invoice, packing list, bill of lading, certificate of origin and insurance prepared together.

Inquiry Information

Send the mounting point drawing or photos, the heaviest load, the longest radius and the carrier the attachment will sit on. Sales engineers confirm the structure, capacity and interface before the build starts.

Henan Elorry Industrial Co., Ltd. | Tel +86-13083602803 | WhatsApp +86-16638078903 | info@elorry-ind.com | Zhengzhou City, Henan Province, China

Image Filenames and Alt Text

  • crane-attachment-10t-mounting-interface.png - Ten tonne boom crane attachment mounted on a truck chassis
  • crane-attachment-10t-outriggers.png - Boom crane attachment with hydraulic outriggers on site
  • crane-attachment-10t-ghana-export.png - Tailor-made boom crane attachment prepared for export to Ghana
  • crane-attachment-10t-pivot-reinforcement.png - Boom crane attachment with column and pivot reinforcement in place

Gold Plus Supplier Assessment certificate by SGS (479886222_T) covering factory qualification, production quality control and supply chain capability is held for the 2025-2026 period.