{{ variable.name }}
SLT-100 is a breathing air compressor for filling high-pressure air cylinders where 300 bar working pressure and 100 L/min suction displacement are required. It uses an X-type layout with four-cylinder, four-stage reciprocating piston compression. Drive options include electric motor or Honda gasoline engine for different installation and field conditions.
SEO Title: SLT-100 100 L/min Breathing Air Compressor for Firefighting
Meta Description: SLT-100 breathing air compressor delivers 100 L/min at 300 bar with X-type four-stage compression, electric or Honda drive, and EN12021-compliant filtration.
URL Slug: slt-100-breathing-air-compressor
The SLT-100 is configured for 30 MPa (300 bar) output with 100 L/min suction displacement. Its four-stage piston compression and splash lubrication suit workshops, emergency service points, and mobile setups when matched with the gasoline engine option. The air path uses multi-stage filtration and oil-water separation to support breathing-grade air production.
30 MPa output supports high-pressure breathing air cylinder filling.
Four-cylinder, four-stage reciprocating piston design with splash lubrication.
Electric 220V/50Hz/2.2kW, 380V/50Hz/3kW, or Honda gasoline engine.
Multi-stage filtration and oil-water separation; EN12021 and WHO guideline compliance.
Inter-stage and final-stage safety valves, pressure-maintaining valve, automatic shut-off, and shock-resistant gauges.
CE certification and MA inspection reports are stated for this compressor range.
| Model | SLT-100 |
|---|---|
| Working pressure | 30 MPa (300 bar) |
| Displacement (suction) | 100 L/min |
| Compression type | X-type layout, four-cylinder, four-stage reciprocating piston |
| Drive | Electric 220V/50Hz/2.2kW or 380V/50Hz/3kW, or Honda gasoline engine |
| Lubrication | Splash lubrication |
| Cooling | High-strength nylon cooling fan |
The SLT-100 can be specified with a 220V/2.2kW motor, a 380V/3kW motor, or a Honda gasoline engine. Optional automatic condensate drainage is available for this compressor range. Select models can fill two gas cylinders simultaneously; confirm the filling configuration before ordering.
Construction uses stainless steel, aluminum alloy, steel or aluminum plates, and cast iron. Low-pressure sections use copper tubing for heat dissipation, while high-pressure sections use stainless steel tubing. Cylinders and filter housings are cleaned with alcohol before leaving the factory. The final stage uses a piston-ring design, so worn rings can be replaced without replacing the entire piston or cylinder liner assembly. Permanent aluminum-alloy filter housings use replaceable filter media.
Available configuration choices include drive type, user-definable automatic shut-off pressure, optional automatic condensate drainage, and food-grade lubricant options. OEM/ODM support is available from the manufacturer for qualified projects.
A: 30 MPa, equivalent to 300 bar.
A: 100 L/min.
A: Electric 220V/50Hz/2.2kW, electric 380V/50Hz/3kW, or Honda gasoline engine.
A: The compressor uses multi-stage filtration and oil-water separation and is stated to comply with EN12021 and WHO guidelines for breathing air.
A: The SLT-100 uses splash lubrication.
A: Yes. Each stage is equipped with inter-stage and final-stage safety valves, plus a pressure-maintaining valve and automatic shut-off.
A: CE certification and MA inspection reports are stated for the range.
Shanghai Sollant Energy Saving Technology Co., Ltd.
Email: info@sollant.com | Tel/WhatsApp: +86 155-8905-3798
Address: No.215, Songri Center, Beihongqiao, Jiading District, Shanghai, China.
