{{ variable.name }}
NKW125Q horizontal hydraulic baler: 125-ton main cylinder, 10-12 t/h capacity and bales of 1100 x 1100 x up to 1600 mm, built in carbon steel for recycling stations and industrial waste lines.

The NKW125Q is a fully automatic horizontal hydraulic baler for recycling stations, packaging plants and waste-treatment sites that need dense, stackable bales. A 125-ton main cylinder compresses waste paper, plastics, textiles and mixed solid waste into bales of 1100 mm wide x 1100 mm high x up to 1600 mm long, at a finished density of 500-600 kg/m3.
Throughput is 10-12 t/h, supported by a 37.5 kW + 11 kW main motor set and a 2000 x 12000 mm feed conveyor driven by a 7.5 kW motor. The hydraulic circuit works at 21 MPa on a carbon steel mainframe weighing about 22 t.
The 125 T cylinder compresses loose material to 500-600 kg/m3, so bales take less floor space and leave the yard less often.
A 37.5 kW + 11 kW main motor set supports 10-12 tons per hour, matching the daily volume of mid-size recycling and packaging operations.
A 2000 x 1100 mm opening, 2000 x 12000 mm conveyor and 7.5 kW conveyor motor keep material moving into the chamber with less manual handling.
Fully automatic control with a PLC-controlled cycle is built for continuous 24/7 industrial duty, with low-noise and low-energy operation specified for the line.
Carbon steel construction, 22 t machine weight and 21 MPa working pressure hold a stable compression cycle over long service life.
Conformity is verified against EN ISO 12100:2010, EN 60204-1:2018 and EN 415-1:2014 under certificate DPWD/09/060/2024, valid to 18 September 2029.
| Parameter | Value |
|---|---|
| Model | NKW125Q |
| Machine type | Fully automatic horizontal hydraulic baler |
| Bale size | 1100 mm (W) x 1100 mm (H) x up to 1600 mm (L) |
| Material density | 500-600 kg/m3 |
| Feed opening size | 2000 mm x 1100 mm |
| Main cylinder force | 125 T |
| Hydraulic working pressure | 21 MPa |
| Main motor power | 37.5 kW + 11 kW |
| Capacity | 10-12 t/h |
| Conveyor size | 2000 x 12000 mm |
| Conveyor motor | 7.5 kW |
| Mainframe material | Carbon steel |
| Mainframe weight | 22 t |
| Mainframe dimensions | Approx. 11 x 2.3 x 2.9 m (L x W x H) |
| Conformity standards | EN ISO 12100:2010, EN 60204-1:2018, EN 415-1:2014 |
The horizontal hydraulic baler is offered in fully automatic and semi-automatic configurations; the technical data on this page describe the NKW125Q specification. Project scope can include conveyors, hydraulic components, baling wire, PET strapping, jumbo bags, packing tools, shredders and crushers, so a single supplier can cover the complete baling line.

The mainframe and bale chamber are built in carbon steel. The machine weighs about 22 t and occupies roughly 11 x 2.3 x 2.9 m, with a separate 2000 x 12000 mm feed conveyor. The hydraulic circuit runs at 21 MPa and drives the 125-ton main cylinder; finished bales are secured with the baling wire, wire rope or woven bags listed for each project.

Materials handled include waste paper and cardboard, plastics, scrap metal, textiles, agricultural straw and mixed solid waste. Typical industries are food, pharmaceuticals, packaging, chemicals, electronics, metals, waste treatment and recycling.
Projects include recycling-facility upgrades, new recycling plants, small processing workshops, and warehouse or industrial waste management. Installation is indoor, at ambient temperature -10 C to 45 C, with normal humidity, light dust and a stable three-phase power supply.

Baling results depend on the material, so every configuration is confirmed against customer data: material type and dimensions, loose density, target bale weight or size, available floor space, power conditions, required automation level and required throughput. Customized baling equipment and complete-line projects are part of the company scope.
A recycling station manufacturer in Indonesia operates one NKW125Q for waste plastic and waste paper baling. Reported results: stable operation, with low noise and low energy consumption cited as the main operating highlights; the expected service life for the project is 10-15 years.
Waste paper, plastics, scrap metal, textiles, agricultural straw and mixed solid waste. Material type, dimensions and loose density are confirmed before a model is fixed.
Bales of 1100 mm wide x 1100 mm high x up to 1600 mm long, at a material density of 500-600 kg/m3.
A stable three-phase supply for the 37.5 kW + 11 kW main motor set and the 7.5 kW conveyor motor; the hydraulic system works at 21 MPa. Capacity is 10-12 t/h.
The mainframe measures about 11 x 2.3 x 2.9 m, plus a 2000 x 12000 mm feed conveyor. The machine is installed indoors at -10 C to 45 C with normal humidity and light dust.
EN ISO 12100:2010, EN 60204-1:2018 and EN 415-1:2014 - Verification of Conformity DPWD/09/060/2024 valid to 18 September 2029 for the EU/EEA, plus Machinery Directive attestation EASY03220201M valid to 21 March 2027.
Yes. The horizontal hydraulic baler is offered in fully automatic and semi-automatic configurations, and the automation level is confirmed during quotation.
Depending on the line: conveyors, hydraulic components, baling wire, PET strapping, jumbo bags, packing tools, shredders and crushers.
horizontal-hydraulic-baler-nkw125q-full-machine-front.jpg - Alt: NKW125Q fully automatic horizontal hydraulic baler, full machine viewhorizontal-hydraulic-baler-nkw125q-tie-area.jpg - Alt: Fully automatic horizontal baler NKW125Q, compression and tying areahorizontal-hydraulic-baler-nkw125q-bale-chamber.jpg - Alt: Horizontal hydraulic baler NKW125Q, baling chamber side viewhorizontal-hydraulic-baler-nkw125q-conveyor-side.jpg - Alt: Horizontal hydraulic baler NKW125Q, feed and conveyor connection sideSEO Title: 125T Fully Automatic Horizontal Hydraulic Baler for Waste Paper Recycling
Meta Description: NKW125Q fully automatic horizontal hydraulic baler with a 125-ton cylinder, 1100 x 1100 mm bales and 10-12 t/h throughput for waste paper and plastic recycling.
URL Slug: /nkw125q-fully-automatic-horizontal-hydraulic-baler/