{{ variable.name }}

The NKB220 is a 200-ton hydraulic bagging press for plants that need loose material compressed into uniform bags instead of handled as bulk. Material enters through a 700 × 480 mm feed opening, the press runs at 21 MPa working pressure and closes a compress cycle in 22 seconds, forming bales with a 480 × 480 mm section and an adjustable height of 220-350 mm. Rated output is 90 bales per hour, equal to 2.5-3 t/h, with each bag weighing 30-35 kg. The carbon steel frame measures 4260 × 1100 × 1800 mm and weighs 6 t, and the 40 HP motor accepts a 200-480 V, 50 Hz, three-phase supply. Material should be at 13% moisture or below.
Loose material is compressed into a dense, self-supporting bag, so each tonne occupies less floor space and bales stack without slumping in storage.
At 2.5-3 t/h the press holds a steady rhythm, which lets one operator load and remove bags without waiting between cycles.
Bag weight stays inside manual and light-forklift handling limits, and the adjustable height tunes packing density to the material being pressed.
Bulky or irregular material can be fed directly, which reduces how much pre-shredding a line needs before baling.
One model covers a wide spread of site power supplies, so the same machine can be installed across different plants and regions.
The press is specified for material at or under 13% moisture, keeping cycle time and bag shape consistent across a shift.
| Parameter | Value |
|---|---|
| Model | NKB220 |
| Pressing force | 200 t |
| Working pressure | 21 MPa |
| Bale size (L × W × H) | 480 × 480 × (220-350) mm |
| Compress time | 22 s |
| Bale capacity | 90 bales/h |
| Bale weight | 30-35 kg per bag |
| Throughput | 2.5-3 t/h |
| Feed opening (L × H) | 700 × 480 mm |
| Moisture requirement | 13% or under |
| Motor power | 40 HP |
| Voltage | 200-480 V / 50 Hz / 3 phase |
| Machine size (L × W × H) | 4260 × 1100 × 1800 mm |
| Machine weight | 6 t |
| Frame material | Carbon steel |
The NKB220 is offered as a single model, so the variation sits in configuration rather than in a model number. Bale height is set anywhere inside the 220-350 mm range, and the electrical arrangement is matched to the 200-480 V, 50 Hz, three-phase supply available on site. Machines are usually delivered together with the matched equipment below.
The operating profile is continuous automatic duty with a PLC-controlled cycle, which suits industrial shifts rather than batch-by-batch running.
The press body is built in carbon steel and carries a total machine weight of 6 t on a 4260 × 1100 × 1800 mm footprint. The press chamber forms the 480 × 480 mm bale section, material is introduced through a 700 × 480 mm feed opening, and the hydraulic system is rated at 21 MPa working pressure against a 200 t pressing force. Each cycle takes 22 seconds from compression to finished bag.
The NKB220 is used where loose material has to become a stackable, transportable bag: food, pharmaceuticals, packaging, chemicals, electronics, metals, waste treatment and recycling. Typical installations are indoor workshops with an ambient temperature between -10 °C and 45 °C, normal humidity, light dust and a stable three-phase power supply.
Model and solution confirmation is based on the material itself. Buyers are asked to provide material type, dimensions, loose density, target bale weight or size, available floor space, power conditions, required automation level and the throughput the line has to reach, so the bale height, feed arrangement and electrical configuration can be fixed before shipment.
Bales measure 480 × 480 mm in section with a height adjustable between 220 mm and 350 mm, and each bag weighs 30-35 kg.
The press is rated at 90 bales per hour, which corresponds to 2.5-3 t/h, with a 22-second compress cycle.
A 40 HP motor running on 200-480 V, 50 Hz, three-phase power. The voltage configuration is matched to your site within that range.
The specification calls for material at 13% moisture or under, which keeps bag shape and cycle time stable.
The machine measures 4260 × 1100 × 1800 mm and weighs 6 t, so the floor and lifting plan should be checked against that footprint and mass.
Material type, dimensions, loose density, target bale weight or size, available space, power conditions, automation level and required throughput.
Send your material details and site conditions to Sales@nkbaler.com or reach the team on WhatsApp at +86 15021631102.
Address: Qun Sheng Lu, Hui Shan Qu, WuXi Shi, Jiang Su Sheng, China. Website: www.nkbaler.com