{{ variable.name }}
City collection unit with 5-8 m3 body, 9,490 kg GVW and 3,200 kg payload for fixed residential and commercial routes.



This 4x2 rear loader compactor garbage truck is built for city refuse collection with a 5-8 m3 body, 9,490 kg GVW and 3,200 kg payload. A hydraulic packer plate, sealed discharge door and 120-1,100 L bin lift support fixed residential and commercial routes. The 4x2 chassis suits narrow streets and frequent stop-start work, with left-hand or right-hand drive and diesel engines from 90 to 300 hp in Euro II to Euro V.
The 4x2 city unit runs at 9,490 kg GVW for frequent stops and narrow streets.
A 2:1 to 3:1 compaction ratio turns several loose loads into fewer trips.
The rear door seal and drain valve help keep liquid off the road.
A 6-15 s lift cycle is matched to the bin standard used on the route.
Gear pump, hard chrome-plated rods and imported seal kits suit multi-shift work.
4x2 drive, 2,800-4,500 mm wheelbase, LHD or RHD and 90-300 hp engines.
| Parameter | Specification |
|---|---|
| Body type | Rear-loader compactor |
| Drive | 4x2 |
| GVW | 9,490 kg |
| Payload | 3,200 kg |
| Body capacity | 5-8 m3 |
| Compaction ratio | 2:1 to 3:1 |
| Compaction force | 12-18 t |
| Bin lift | 120-1,100 L, 6-15 s cycle |
| Working cycle | Fill 20-30 s, discharge about 40 s |
| Hydraulic pressure | 18-21 MPa |
| Engine | Diesel 90-300 hp, Euro II to Euro V |
| Cab | 2-3 persons, LHD or RHD |
The 5-8 m3 4x2 rear loader is one of the two city models already quoted and shipped. The other city unit is a 10 m3 4x2 at 12,490 kg GVW and 4,990 kg payload. This 5-8 m3 unit can be re-quoted with a larger body or a second axle.
The body shell uses Q235/Q345 carbon steel with 4-6 mm side walls and a 5-8 mm floor, welded and fully sealed. The rear door has a replaceable EPDM rubber seal. The packer plate uses Q345 wear-resistant steel with replaceable wear strips. Hydraulic cylinders use 45# steel barrels, hard chrome-plated piston rods and imported seal kits. The leachate tank is stainless steel 304 or epoxy-coated steel, and the sub-frame is Q235 channel bolted to the chassis rails.
Municipal solid waste collection for city and district sanitation departments, residential and commercial refuse routes, markets, restaurants and hotels, hospital and clinic non-hazardous waste, tourism areas and public event cleaning, and community sanitation programmes.
Body volume, compaction force, axle layout and bin lift interface can be fixed around the waste type, local bin size, stops per day and tipping point. Left-hand or right-hand drive, air suspension, cold-start package or tropical cooling are available. Lead time is about 25-40 working days from down payment. Trade terms are FOB, CIF or DAP.
A Tonga municipal sanitation and waste contractor ordered dozens of units with an 8 m3 body over a 10-year relationship. The batch delivery capability was backed by pre-shipment inspection, and the client was satisfied with build quality and lead time. The 8 m3 body sits inside this 5-8 m3 range.
Q: What GVW and payload does this 4x2 rear loader use?
A: The 5-8 m3 4x2 city unit runs at 9,490 kg GVW with a 3,200 kg payload.
Q: Which bins can the lift handle?
A: The rear bin lift handles 120-1,100 L bins in a 6-15 s cycle.
Q: How is leachate controlled?
A: The body is fully sealed with a rear door rubber seal and a leachate sump with drain valve under the body.
Q: Can it be supplied with right-hand drive?
A: Yes. The cab is available in left-hand or right-hand drive with a 2-3 person layout.
Q: What is the lead time and warranty?
A: Lead time is about 25-40 working days from down payment. Major components carry a 12-month warranty; hydraulic components follow supplier terms.
Q: Are spare parts supplied?
A: A spare-parts kit can include seal kits, hydraulic hoses, filters, bin lift rollers and lamps.
Henan Elorry Industrial Co., LTD. | Tel: +86-13083602803 | WhatsApp: +86-16638078903 | Email: info@elorry-ind.com | Address: Zhengzhou City, Henan Province, China
