{{ variable.name }}
Five-stage brushless worm drive with self-locking right-angle output, 8.0 kg.cm rated torque and 3-35 rpm for slow, precise positioning.
SEO Title: 5 Stage Worm Gear Motor TWG3246-TEC2430 with 8.0 kg.cm Holding Torque
Meta Description: 5 stage worm gear motor with self-locking right-angle output, 8.0 kg.cm rated torque and 3-35 rpm for precise positioning and adjustable support drives.
URL Slug: /worm-gear-motor-twg3246-tec2430-5-stage
This is the five-stage build of the TWG3246-TEC2430 DC brushless worm gear motor. The gearbox stays 46 mm long, but the extra stage adds reduction, which places the output at the slow end of the 3-35 rpm range and makes fine adjustment easier to control. Rated torque goes up to 8.0 kg.cm, the output is right-angled to the motor axis, and the worm drive is self-locking, so an electrically adjustable support holds its position without an additional braking device. Brushless commutation produces no spark and minimal electromagnetic interference, and the stainless steel, iron and copper train is wear and impact resistant with very low operating noise. Typical use is electrically adjustable supports, precision automated instruments and medical positioning mechanisms.
The 5-stage train is the highest-reduction build of the three series options, placing output speed at the slow end of the 3-35 rpm range for fine positioning.
The self-locking worm output keeps an adjusted height or angle in place, so no additional braking device is normally needed in the mechanism.
Torque up to 8.0 kg.cm moves a loaded support or instrument carriage steadily through small increments.
Five stages still fit a 46 mm housing with module 0.5 or 0.6 gearing, leaving room inside the device frame.
No brushes means no spark and minimal electromagnetic interference beside the sensors and control electronics of a precision instrument.
| Model | TWG3246-TEC2430 |
|---|---|
| Motor type | DC brushless worm gear motor |
| Rated voltage | DC 12V-24V |
| Number of gear stages | 5 (3 and 4 stage builds also available) |
| Output speed | 3-35 rpm range, dependent on stage count |
| Rated torque | 8.0 kg.cm max |
| Module | 0.5 / 0.6 |
| Gearbox length | 46 mm |
| Output direction | Right angle, self-locking |
| Materials | Stainless steel, iron, copper |
| Certification | RoHS (SGS CANEC26013326101); ISO9001:2015 (DCI F02926Q00865R402) |
The same 46 mm gearbox is offered with 3, 4 or 5 stages and with module 0.5 or 0.6. If the five-stage output is slower than your mechanism allows, the 4- or 3-stage build raises the speed inside the same 3-35 rpm band without changing the mounting envelope.

Stainless steel, iron and copper make up the gear train. The worm runs on the motor shaft and drives the wheel at 90 degrees, so a support column or instrument chassis can take the motor alongside it. Each added stage contributes reduction inside the same 46 mm housing, which is why the five-stage build delivers the slowest movement of the series.
Electrically adjustable supports and stands where a height or angle must be held after adjustment; precision automated instruments that need slow, repeatable increments; and medical positioning axes such as pipetting equipment, infusion and syringe pumps, analyzers and rehabilitation robots, where low noise, low vibration and stable long-term operation are required.
Send the increment size your mechanism must resolve, the load torque it must hold, the supply rail available (12V or 24V) and the space around the 46 mm gearbox. TT Motor's 35-engineer team reviews those figures against the 3/4/5 stage and 0.5/0.6 module options before a sample is agreed.
Smart lock manufacturer, United States. 5,000-50,000 units per year, 5 years or more. The motor drives lock body opening and closing and the mechanical transmission mechanism; high-frequency cycles are met and batch production stays stable, based on small size, high torque and low noise.
Medical device manufacturer, United Kingdom. 500-2,000 units per year, 3 years or more. The motor drives a medical pump, holding stable output in long-term operation and reducing maintenance frequency.
Why choose five stages instead of three or four?
Each stage adds reduction, so the five-stage build gives the slowest output inside the 3-35 rpm range - useful when an adjustable support or positioning axis must move in very small increments.
Will an adjustable support stay in place after adjustment?
Yes. The right-angle worm output is self-locking, so the typical build holds position without an additional braking device.
Can the five stages still fit my housing?
The gearbox length stays 46 mm across the series; stage count changes the internal train, not the gearbox length given for this model.
Which voltages are available?
The series is rated DC 12V-24V, so the winding is matched to the supply on your control board.
What certifications cover this model?
SGS RoHS report CANEC26013326101 for the TWG3246-TEC2430 and related series models, and ISO9001:2015 certification F02926Q00865R402 issued by DCI.
What do you need to specify a build?
Required increment or output speed, holding torque, supply voltage, available space and annual quantity.
TT Motor (Shenzhen) Industrial Co., Limited
Contact: Sally Su
Tel / WhatsApp: +86 180-0299-3379
Email: sales26@ttmotor.com
Address: 4th Floor, C Building, Huilongda Industrial Park, Shilong Community, Shiyan, Bao an District, Shenzhen, China
Website: www.ttmotor.com
Specifications apply to the TWG3246-TEC2430 series. Confirm stage count, module and voltage before ordering.